MYE MWC2-8 User manual

Radio
MWC2-8 800MHz Receiver
with FM Radio O
p
tion
MWC2-8
Operation Manual
man_MWC28_V8 www.myeclubtv.com

2
h
CONTENTS
800 MHz Frequency Range 863.05 TO 864.8 MHz
FM Frequency Range 87.5 to 107.9 MHz
Input Sensitivity (20 dB SINAD) -85 dBm typical
Modulation FM Stereo deviation +/- 60KHz
Stereo Separation >25dB
Equalization BASS BOOST, FLAT
Audio Frequency Response 20 Hz to 18 kHz
Frequency Entry Scroll up/down.
Power 4.75VDC TO +12VDC
Product Description
Specifications………………………………………….…… 2
Receiver Orientation (Front / Rear)………………………. 3
Keypad – Key Identification………………………….……. 4
Main Features………………………………………………. 4
Display and Icon Identification…………….………………. 5
Programming - Near / Far Reception Setting………………. 5
Programming the Receiver (Auto Programming)………….. 6
Programming the Receiver (Manual) ……………………. 6
FM Radio, FM Radio Disable…………………………..….. 7
Attaching the Receiver……………………..…………...….. 8
Intellijack…………………….……………………………... 10
Warranty Information…………..…………..….……..…….. 11
Specifications

RoHS
The MYE MWC2-8 Receiver allows the user to listen to a TV or other audio source connected to a compatible
800MHz transmitter. It can also be used as an FM radio receiver. The MWC2-8 is powered by using a MYE
Entertainment CSAFE cable plugged directly into any standard cardio CSAFE port or MYE 9 Volt AC Adapter.
The European Union’s (EU) WEEE (Waste Electrical and Electronic Equipment) directive is for waste management of
electronic equipment sold into EU countries.
The symbol on our product (shown) indicates that this product must not be disposed of with other waste. It is the
user’s responsibility to dispose of their waste electrical and electronic equipment by handing it over to an approved
reprocessor or recycler. For more information on proper recycling, please contact your local city office or MYE
Entertainment distributor.

3
RECEIVER ASSEMBLY - FRONT VIEW
RECEIVER ASSEMBLY & MOUNTING - REAR VIEW
LCD DISPLAY
HEADPHONE JACK
KEYPAD
FRONT MOUNTING SCREWS
UNSCREW TO RELEASE the
MOUNTING BASE ASSEMBLY.
(PLEASE READ “ATTACHING
THE RECEIVER” PGS. 8/9)
FRONT FLANGE
CABLE EXIT HOLES
BAR CODE SERIAL NUMBER
AND RATING LABEL
CSAFE CABLE RJ45 JACK
CABLE BLOCKS
REAR FLANGE
MOUNTING BASE
CABLE EXIT HOLES
FRONT MOUNTING
SCREWS

4
MYE Entertainment Wireless 800MHz TV Receiver
Model: MWC2-8
Main Features:
TV Button
Selects audio from TV’s connected to
800MHz transmitters.
FM Button
Selects audio from FM broadcast radio.
Channel Up/Down Buttons
Selects next desired audio channel Up or Down.
Volume Up/Down Buttons
Controls Volume Level Up or Down
Scan
Allows user to scan automatically up to next
available (US) FM radio channel.
MWC2-8 KEY IDENTIFICATION
VOLUME UP
VOLUME DOWN
CHANNEL UP
CHANNEL DOWN
MUTE
PREVIOUS CHANNEL
Previous Channel
Allows user to jump back to the
previously selected FM channel.
Power Button
Turns Receiver ON/OFF
Mute
Mute ON or OFF
EQ Select
Selects between Bass Boost and Flat.
EQ SELECT
POWER ON/OFF
SCAN
800MHz Mode Select
FM RADIO Mode Select
The MYE MWC2-8 Receiver allows the user to listen to a TV or other audio source connected to a compatible
900MHz transmitter. It can also be used as an FM radio receiver. The MWC2-8 is powered by using a MYE
Entertainment CSAFE cable plugged directly into any standard cardio CSAFE port or MYE 9 Volt AC Adapter.

5
Programming - Far/Near Reception
This feature provides the ability to set the reception sensitivity of each MYE
Entertainment MWC2-8 receiver depending on the proximity between the
receiver and transmitter.
Far Mode: (Default): The far mode is the most widely used and will accommodate
the majority of installations.
Near Mode: The near mode is used primarily in situations where the receiver is
positioned very close to one or more transmitters. The Near Mode is
recommended when receivers are installed between 1 and 5 feet from a
transmitter.
Far / Near Mode
Note: The factory default is set to “Far” (HI).
To change to “Near” mode (LO):
1. Start with the receiver in the OFF position.
2. With the unit OFF, press and hold the Volume UP button.
3. While holding the Volume UP button, press and release the POWER
button.
4. Wait three seconds while continuing to hold the Volume UP button until
‘LO’ is appears on the display.
5. To revert back to Far mode simply follow steps 1-4 until “HI” appears on
display.
DISPLAY and ICON IDENTIFICATION
FAULTY
HEADPHONE
JACK ICON
VOLUME
LEVEL
INDICATOR
CHANNEL
ICON
CURRENT
CHANNEL OR
FM FREQUENCY
800MHz MODE
SELECTED
MUTE “ON”
EQ PRESETS
FREQUENCY
PRESET ICON
FM FREQUENCY
ICON
FM RECEIVER
MODE
SELECTED

6
Programming
The MYE Entertainment MWC2-8 receiver must be programmed to detect and
lock in the MYE Entertainment transmitters or other brands of transmitters listed
below. The receiver features both “auto” and “manual” program modes. In the
auto mode the MWC2-8 will automatically search for and program in your
transmitters. The manual mode provides the ability to add or erase a specific
transmitter channel or unwanted frequency caused by spurious emissions or
other local elements.
Auto Program Mode
1. Press Channel Down and Volume Up buttons simultaneously for three
seconds until “P-1” appears on the display.
2. Press the “Ch Up ” button to select one of the following program modes:
P-1 = MYE Entertainment 800MHz Transmitters
P-2 = Cardio Theater / Enercise XTV Transmitters
P-3 = Audeon 800MHz Transmitters
3. After selecting the Transmitter Mode, press the TV button to auto-scan
and lock transmitters.
4. Press the Channel Up or Channel Down buttons to determine all
transmitters have been locked in. NOTE: “PRESET” will appear in the
display when a transmitter channel is programmed.
5. To exit program mode press the EQ button. The display will blink briefly
and then default to first transmitter channel programmed.
Manual Program Mode (Add or Delete Frequencies)
1. Press Channel Down and Volume UP buttons simultaneously for three
seconds until “P-1” appears on the display.
2. Press the “Ch Up” button to select one of the following transmitter program
modes listed above.
3. Press the EQ button
4. Press CHANNEL UP/DOWN buttons to scroll through all transmitter
channels.
5. To add or delete a transmitter channel press the “TV” button. NOTE:
“PRESET” will appear in the display when a transmitter channel is
programmed.
6. To exit manual program mode press the EQ button. The display will blink
briefly and will default to first transmitter channel programmed.

7
FM RADIO
Pressing the “FM” key switches the audio reception mode from 800MHz to FM.
The FM Radio option is set to receive FM radio broadcasts from 87.5 to 107.9.
Use the SCAN key to scan automatically up to next available FM channel. Use
the channel UP / Down keys to move up / down one FM frequency at a time.
FM RADIO - Disable
The FM Radio function may be disabled (or enabled) by holding down the ‘FM’
button for three seconds at power up. The factory default for FM Radio is
“enabled.”
1. Start with unit OFF. Press and hold the “FM” button.
2. Press power ON button. Wait 3 seconds. FM icon and FM arrow icon ‘►’
are used to display FM radio mode status.
a. Only the FM arrow icon ‘►’ will display for 3 seconds when FM
Radio “disable” has been selected. When the FM Radio mode has been
disabled, the FM icon will no longer be visible during normal operation.
b. The FM icon and the FM arrow icon ‘►’ are both displayed when
FM Radio “enable” has been selected.
Other Features
Headphone Removal Monitoring
When the receiver detects that the headphones have been removed for more than ten
seconds, it will automatically return the volume setting of the receiver to a nominal level.
Power Supply Monitoring
When the receiver detects low power input below 4.75vdc it will automatically power
down to a stand-by (off) state.

8
The MWC2-8 receiver uses the Secure Grip Mounting Band. Mounting the receiver is now quick, secure and
discrete. It is required that the Secure Grip Mounting Band always be used when installing MYE Entertainment
MWC2-8 receivers.
Attaching the Receiver
Wrap the Secure Grip Band around the intended
mounting pole and cut to fit. Do not overlap ends or
have a gap over 1/8”. Secure the Grip Band with 1
MYE Entertainment nylon tie in the center channel.
OFFSET the knuckle of the nylon tie from center by
approximately 1/4”. Trim the excess nylon tie
Install the Mounting Base over the nylon tie
knuckle. Insert two MYE Entertainment nylon ties
into the holes opposite the tie knuckle hole.
Seat the nylon ties into the corresponding
channels of the Secure Grip Band. Pull the nylon ties tight to align all 3 tie knuckles. Trim all excess nylon tie completely.
Before you begin: Unscrew the MOUNTING BASE ASSEMBLY from the receiver by using the
FRONT MOUNTING SREWS. (See page 3 – Receiver Assembly Front View.)

9
*USE only MYE Entertainment CSAFE cables or 9 volt power supplies with all MYE Entertainment receivers
(900MHz, 800MHz or FM). MYE Entertainment will not be responsible for damage to receivers or cardio
equipment when alternate or other cables or power supplies are used.
Position and install the Rear Flange onto the
Mounting Base. Interlocking gears assure secure
positioning regardless of the rotation.
Insert one end of the CSAFE* cable into the
RJ45 jack on the back of the receiver assembly.
MYE ENTERTAINMENT receivers can be
powered by CSAFE ports on CSAFE compliant
cardio equipment or MYE Entertainment 9 volt
p
ower su
pp
lies.
A
B
C
Route the CSAFE cable through the appropriate
rubber cable blocks A, B or C depending on
where you need the cable to exit the receiver
flange.
Align and attach the receiver assembly to the
Rear Flange using the Front Flange mounting
screws.

10
IntelliJack - Self Diagnostic Headphone Jack
The IntelliJack self diagnostic headphone circuit detects when the headphone
jack has failed or been damaged. When a faulty headphone jack is detected, a
flashing “headphone” icon appears in the LCD display. It will remain on until a
new jack is installed and the icon reset.
To Replace the Intellijack:
1. Loosen the two screws evenly on the bottom of the IntelliJack module and
remove.
2. Carefully insert new IntelliJack module without bending contact pins.
3. Reset the Icon. Turn MYE Entertainment receiver OFF then press and
hold the “Power” button for 3-4 seconds. When the “headphone” icon
appears again release the Power button.
IMPORTANT NOTICE: Faulty headphones can trigger the faulty headphone jack icon. It is
important to test the headphone jack prior to replacement. If the headphone jack is deemed OK
simply follow step #3 above to reset the faulty headphone jack.

11
PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CAREFULLY BEFORE USING YOUR MYE
ENTERTAINMENT PRODUCT. BY USING THE EQUIPMENT, YOU ARE CONSENTING TO BE BOUND BY THE
FOLLOWING WARRANTY TERMS AND CONDITIONS.
LIMITED WARRANTY
MYE ENTERTAINMENT WARRANTS ALL NEW MYE ENTERTAINMENTPRODUCTS TO BE FREE FROM DEFECTS IN
MATERIALS AND MANUFACTURERS FOR THE WARRANTY PERIODS SET FORTH BELOW. THE WARRANTY
PERIODS COMMENCE ON THE INVOICE DATE OF THE ORIGINAL PURCHASE. THIS WARRANTY APPLIES ONLY
AGAINST DEFECTS DISCOVERED WITHIN THE WARRANTY PERIOD AND EXTENDS ONLY TO THE ORIGINAL
PURCHASER OF THE PRODUCT. PARTS REPAIRED OR REPLACED UNDER THE TERMS OF THIS WARRANTY
WILL BE WARRANTED FOR THE REMAINDER OF THE ORIGINAL WARRANTY PERIOD ONLY. TO CLAIM UNDER
THIS WARRANTY, THE BUYER MUST NOTIFY MYE ENTERTAINMENTOR YOUR AUTHORIZED MYE
ENTERTAINMENT DEALER WITHIN 30 DAYS AFTER THE DATE OF DISCOVERY OF ANY NONCONFORMITY AND
MAKE THE AFFECTED PRODUCT AVAILABLE FOR INSPECTION BY MYE ENTERTAINMENT OR ITS SERVICE
REPRESENTATIVE. MYE ENTERTAINMENT PRODUCTS DEEMED DEFECTIVE BY A MYE ENTERTAINMENT
REPRESENTATIVE WILL BE ISSUED A RETURN AUTHORIZATION NUMBER. MYE ENTERTAINMENT WILL NOT
ACCEPT RETURNS WITHOUT A RETURN AUTHORIZATION NUMBER. MYE ENTERTAINMENT RESERVES THE
RIGHT, AT THEIR OPTION, TO REPAIR OR REPLACE THE PRODUCT AFTER VERIFICATION OF DEFECT.
PRODUCT THAT FAILS AFTER THE WARRANTY PERIOD EXPIRES WILL BE REPAIRED OR REPLACED AT THE
CURRENT PART AND LABOR PRICING AFTER AUTHORIZATION FROM THE CUSTOMER. REPAIRS ARE
WARRANTED FOR 90 DAYS. MYE ENTERTAINMENT’S OBLIGATIONS UNDER THIS WARRANTY ARE LIMITED AS
SET FORTH BELOW:
WARRANTY PERIODS AND COVERAGE:
MYE ENTERTAINMENT RECEIVERS 2 YEAR PARTS, LABOR
CONDITIONS AND RESTRICTIONS:
THIS WARRANTY IS VALID ONLY IN ACCORDANCE WITH THE FOLLOWING CONDITIONS:
THE WARRANTY APPLIES TO THE MYE ENTERTAINMENT PRODUCT ONLY 1) WHILE IT REMAINS IN THE
POSSESSION OF THE ORIGINAL PURCHASER AND PROOF OF PURCHASE IS DEMONSTRATED. 2) IT HAS NOT
BEEN SUBJECT TO ACCIDENT, MISUSE, ABUSE, IMPROPER SERVICE, MECHANICAL OR ELECTRICAL NON-MYE
ENTERTAINMENT AUTHORIZED MODIFICATION. 3) CLAIMS MADE WITHIN THE WARRANTY PERIOD.
THIS WARRANTY DOES NOT COVER DAMAGED OR FAILURE CAUSED BY ELECTRICAL WIRING NOT BEING IN
COMPLIANCE WITH ELECTRICAL CODES OR MYE ENTERTAINMENT’S OWNER MANUAL SPECIFICATIONS, OR
FAILURES TO PROVIDE REASONABLE AND NECESSARY MAINTENANCE AS OUTLINED IN THE OWNER’S
MANUAL.
WARRANTIES OUTSIDE THE UNITED STATES AND CANADA MAY VARY. PLEASE CONTACT YOUR LOCAL
DEALER FOR DETAILS.
LIMITED WARRANTY SHALL NOT APPLY TO:
1) SOFTWARE UPGRADES.
2) NORMAL WEAR AND TEAR, CONSUMABLES AND COSMETIC ITEMS INCLUDING BUT NOT LIMITED TO
LABELS.
3) REPAIRS PEFORMED ON MYE ENTERTAINMENTPRODUCTS MISSING A SERIAL NUMBER OR WITH A
SERIAL TAG THAT HAS BEEN ALTERED, REATTACHED OR DEFACED.
4) SERVICE CALLS TO CORRECT INSTALLATION OF THE PRODUCT OR INSTRUCT OWNERS ON HOW TO
USE THE PRODUCT.
5) PICK UP AND DELIVERY INVOLVING REPAIRS
6) ANY LABOR COSTS INCURRED BEYOND THE APPLICABLE LABOR WARRANTY PERIOD
7) THE USER IS CAUTIONED THAT CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE
MANUFACTURER OF THE PRODUCT COULD VOID THE USER’S AUTHORITY TO OPERATE THE PRODUCT.
WARRANTY

12
THE WARRANTIES PROVIDED HEREIN ARE THE EXCLUSIVE WARRANTIES GIVEN BY MYE ENTERTAINMENT AND
SUPERSEDE ANY PRIOR, CONTRARY OR ADDITIONAL REPRESENTATIONS, WHETHER ORAL OR WRITTEN. ANY
IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE THAT APPLY TO ANY PARTS DESCRIBED ABOVE ARE LIMITED IN DURATION TO THE PERIODS OF
EXPRESS WARRANTIES GIVEN ABOVE FOR THOSE SAME PARTS. MYE ENTERTAINMENTHEREBY DISCLAIMS
AND EXCLUDES THOSE WARRANTIES THEREAFTER. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. MYE
ENTERTAINMENT ALSO HEREBY DISCLAIMS AND EXCLUDES ALL OTHER OBLIGATIONS OR LIABILITIES,
EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, WITH RESPECT TO ANY NONCONFORMANCE OR
DEFECT IN ANY PRODUCT, INCLUDING BUT NOT LIMITED TO: (A) ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR
REMEDY IN TORT, WHETHER OR NOT ARISING FROM THE NEGLIGENCE OF MYE ENTERTAINMENTOR ITS
SUPPLIERS (WHETHER ACTIVE, PASSIVE OR IMPUTED); AND (B) ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR
REMEDY FOR LOSS OF OR DAMAGE TO ANY PRODUCT. THIS DISCLAIMER AND RELEASE SHALL APPLY EVEN IF
THE EXPRESSED WARRANTY SET FORTH ABOVE FAILS OF ITS ESSENTIAL PURPOSE.
FOR ANY PRODUCT DESCRIBED ABOVE THAT FAILS TO CONFORM TO ITS WARRANTY, MYE ENTERTAINMENT WILL
PROVIDE, AT THEIR OPTION ONE OF THE FOLLOWING: 1) REPAIR, 2) REPLACEMENT OR 3) REFUND OF THE
PURCHASE PRICE.
MYE ENTERTAINMENTAND/OR ITS SUPPLIERS SHALL HAVE NO OBLIGATION OR LIABILITY, WHETHER ARISING
IN CONTRACT (INCLUDING WARRANTY), TORT (INCLUDING ACTIVE, PASSIVE, OR IMPUTED NEGLIGENCE AND
STRICT LIABILITY), OR OTHERWISE, FOR DAMAGE TO THE PRODUCT, PROPERTY DAMAGE, LOSS OF USE,
REVENUE OR PROFIT, COST OF CAPITAL, COST OF SUBSTITUTE PRODUCT, ADDITIONAL COSTS INCURRED BY
BUYER (BY WAY OF CORRECTION OR OTHERWISE) OR ANY OTHER INCIDENTAL, SPECIAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM NON-DELIVERY OR FROM THE USE, MISUSE OR
INABILITY TO USE THE PRODUCT. THIS EXCLUSION APPLIES EVEN IF THE ABOVE WARRANTY FAILS OF ITS
ESSENTIAL PURPOSES AND REGARDLESS OF WHETHER SUCH DAMAGES ARE SOUGHT FOR BREACH OF
WARRANTY, BREACH OF CONTRACT, NEGLIGENCE OR STRICT LIABILITY IN TORT OR UNDER ANY OTHER
LEGAL THEORY.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO
THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE
TO STATE.
WARRANTY – cont.
072311 MYE Entertainment All Rights Reserved 2011
MYE Entertainment, Inc
25129 The Old Road
Suite 305
Stevenson Ranch, Ca. 91381
1-661-964-0217
www.myeclubtv.com