MyGica U800 User manual

U800
HDMI Capture Device
User Manual
www.mygica.com

1
MyGica U800 Quick Start Guide
Thank you for purchasing MyGica U800 product. The following will guide you through how to set
up this device. Hope this device will bring you nice digital experience.
With MyGica U800, just plug to your PC (Windows, Mac, Linux), there is no need to install driver. You
can use any 3rd party software to capture or stream your HD game or other HD video source.
1. USB3.0 Type‐A port: To connect to computer with USB3.0 cable.
2. HDMI input port: Connect video source with HDMI cable.
3. HDMI output port: Connect TV with HDMI cable.
For Windows
First, set the audio capture sample rate to 48KHZ:
Note: This is an important settings, otherwise will caused bad audio quality.

2
1) After connect the device to computer, right click on “Speaker” icon on Desktop and
choose ”Recording devices”
2) Double click on Digital Audio Interface “FHD Webcamera”, and then select the “Advanced” menu.
Change the sample rate to “2 channel 16 bit, 48000 Hz (DVD Quality)”
3) If you need to adjust the input audio volume level or if there is no audio input, select “Levels”
menu and set the volume level and check the icon behind the value to see if the audio is mute or not.
(You can change it by clicking on it)

3
OBS Studio ( for windows, Mac, Linux):
1. Go to obsproject.com/download to download OBS Studio according to your computer’s operating
system, and install it on your computer.
Connect U800 to your computer with USB3.0 cable and connect video source and TV with HDMI
cable. Windows will install the driver automatically, and you will see “FHD Camera” in device
manager.
2. Run OBS Studio, Click”+”icon under “Source “windows and select “Video Capture Device”. Then
select “FHD Camera” in the drop box next to “Device”.
3. At Set Audio Output Mode to “Output desktop audio (WaveOut).Audio Device to “FHD
Webcamera”.

4
4.Set the video latency for make the audio and video synchronized:
a) Right click “Video Capture Device” then click ”Filters”;
b) Click to add “Video Delay (Async)”;
c) Set it to 470ms (You can adjust it smaller or bigger until you found the audio and video
synchronized)

5
5.Then you can recording or streaming video :
For MAC:
Works with Quick Time Player;
1.Run Quick Time Player, select ”New Movie Recording”;
2. Choose “FHD Webcamera” under Camera and Microphone option:

6
For Linux:
Works with OBS VLC (shows example for Ubuntu):
1. Right click on window, select “Open Capture Device”
2.Choose “Video camera “‐‐‐”/dev/video0”then click “play”

7