Nac EM02-AC101 User manual
EM02-AC101
001-0012 Rev. 03
Page 1 of 2
Utility Pole EM02 Enclosure Accessory
Model EM02-AC101
SECTION PAGE #
1. GENERAL ............................................................ 1
2. APPLICATIONS .................................................. 1
3. INSTALLATION ................................................... 1
4. CUSTOMER SERVICE ...................................... 1
5. WARRANTY AND REPAIRS ............................ 1
6. SPECIFICATIONS .............................................. 2
7. ORDERING INFORMATION .............................. 2
1. GENERAL
1.1 The NAC EM02-AC101 is a accessory for
mounting the EM02 series of enclosures either on a
wall with screws or on a pole with screws or a strap.
1.2 Ordering codes revised.
1.3 The EM02-AC101 provides the following features
and capabilities:
•Aluminum construction engineered to endure
extreme environments and physical abuse.
•Flexible, for either wall or pole mount.
2. APPLICATIONS
2.1 The EM02-AC101 is used with the EM02 series
of enclosures. This Enclosure is designed to be
mounted to the side of a wall, a pole or other indoor
or outdoor where termination is required. It is ideal,
for use in applications involving utility poles. The
EM02 series of products are designed to withstand
harsh environments.
3. INSTALLATION Figure 1
3.1 For wall mounting, locate the desired location
and install the bracket using a minimum of 2 #10
screws. Use an appropriate screw type for the
intended installations.
3.2 For pole mounting, attach straps (not included)
around tabs at top and bottom of bracket.
3.3 Hang the EM02 series on from the hook on
bracket.
3.4 Secure EM02 series using the supplied nut on the
threaded stud at tne bottom of the bracket.
4. CUSTOMER SERVICE
If technical or customer assistance is required,
please contact NAC at the following address or
phone number:
N A Communications, LLC
3820 Ohio Ave. Suite 12
St. Charles, Illinois 60174
Toll Free: 1-888-402-4622
Voice: (630) 513-1299
www.gotonac.com
5. WARRANTY & REPAIRS
5.1 Warranty
NAC warrants this product for the period specified by
the terms governing the sale of the product. Any
attempt to repair or modify the equipment by anyone
other than an authorized NAC representative will void
the warranty.
This limited warranty does not cover any losses or
damages resulting from shipment to or from the
customer, or from improper installation, abuse,
modifications, or unauthorized repair by other than
NAC personnel.
Page 2 of 2
Figure 1. Installation
5.2 Repair and Return
NAC equipment will be repaired or replaced without
cost during the warranty period if the product is
defective for any reason other than abuse, improper
use, or improper installation. Before returning
defective equipment, first request a Return Material
Authorization (RMA) number from NAC. Once an
RMA number is obtained, return the unit, freight
prepaid, along with a brief description of the
problem, to:
N A Communications, LLC
3820 Ohio Ave. Suite 12
St. Charles, Illinois 60174
ATTN: Repair & Return Dept.
6. SPECIFICATIONS
6.1 General
Material: Aluminum
6.2 Physical Specifications
Feature U.S. Metric
Height 11.5 inches 29.2 cm
Width 3.5 inches 8.9 cm
Depth 1.0 inches 2.5 cm
Weight (approx.)
0.4 pounds 180 g
Operating
Temperature -40°to 185°F -40°to 85°C
7. ORDERING
Product Description Order Number
Pole Mounting Bracket EM02-AC101
2 Slot T-1 HDSL Outdoor NID
w/ FAC Only Lightning Protection EM02-200
2 Slot T-1 HDSL Outdoor NID
w/ No Lightning Protection EM02-201
2 Slot T-1 HDSL Outdoor NID
w/ FAC & CPE Lightning Protection EM02-210
