Nachfolger HY5 Series User manual

C101_802_C
nachfolger GmbH
Boecklinstrasse 59 / 2
1020 Vienna
Austria, EU
www.nachfolger.com
[e-mail]
pump
compatible with
nachfolger HY5 series

The mobile pump allows maximum flexibility, as well as mobility and further
intensified the simplicity of the nachfolger HY5 series.
• Briey press the button (A) 3 times to activate it.
• The button ashes blue, when the activation of the pump was successful.
• Afterwards the pump function can be switched on and off
by pressing the same button (A).
• When the correct pressure is reached, the pump switches off automatically.
• If the pump is not used for 30 seconds, it must be activated again.
NOTE! After lling the seat, the hose connector (C) of the pump must be
removed from the valve, otherwise the valve remains slightly open.
Charging the pump:
The pump can or should be easily recharged (B) with the charger while driving on
the 12V socket in the car, so it is always ready when you need it while traveling.
NOTE! Especially when traveling by airplane, ensure that the pump
will not be activated accidentally by other objects.
WARNING! Please note, that the tube will get hot after the inflator
has worked for a long time.
OperatiOn Of the pump
funCtiOn Of the pump
a
B
C
1x Inator (D)
1x Tube with Air Hose (E)
1x USB Charger (F)
3x Sealing Ring (G)
1x Hand Bag (H)
1x User Manual
• Input voltage: 15 V DC, cigarette lighter 12 V DC
• Battery type: LiFe (Lithium Iron Phosphat)
• Energy content: 6,6 Wh
• Battery current: 500 mAh
• Max. current: 5 A
• Inflator efficiency: Fill up nachfolger HY5 series in 3 minutes
• Max. pressure: 0,9 bar
• Operation temperature: –20°C – +60°C
• Size: 55 mm x 45 mm x 200 mm
Made in China
paCKaGe
teChniCaL Data
D
h
f
G
e