NAD T512 User manual

T 532 / T 512
DVD / CD / MP3 Player
GB Owner’s Manual

2
Safety Precautions
This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: Do not install this equipment in a confined space
such as a book case or similar unit.
CAUTION:
This Digital Video Disc Player employs a Laser System.
To ensure proper use of this product, please read this owner’s
manual carefully and retain for future reference should the unit
require maintenance, contact an authorized service location
(see service procedure).
Use of controls, adjustments, or the performance of proce-
dures other than those specified herein may result in haz-
ardous
radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as vases, should be placed on the apparatus.
This product is manufactured to comply with
the radio interference requirements of EEC
DIRECTIVE 89/336/EEC, 93/68/EEC and
73/23/EEC.
NOTES ON COPYRIGHTS:
It is forbidden by law to copy, broadcast, show, broadcast
via cable, play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection tech-
nology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
SERIAL NUMBER: The serial number is found on the back of
this unit. This number is unique to this unit and not available to
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No. ___________________________________
Serial No. ___________________________________
WARNING: TO REDUCE THE RISK OF FIRE OR ELEC-
TRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

INTRODUCTION
3
Table of Contents
Introduction
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Front Panel and Display Window . . . . . . . . . . . . . . 6
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Preparation
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting to Optional Equipment . . . . . . . . . . . 10
Before Operation . . . . . . . . . . . . . . . . . . . . . . . 11-14
General Explanation. . . . . . . . . . . . . . . . . . . . . . 11
On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . 11
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 12-14
 Initial Settings General Operation. . . . . . . . . 12
 Language . . . . . . . . . . . . . . . . . . . . . . . . . . 12
 Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
 Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
 Others (DRC/Vocal/PBC) . . . . . . . . . . . . . . . 13
 Parental Control. . . . . . . . . . . . . . . . . . . . . . 14
Operation
Operation with DVD and Video CD . . . . . . . . . 15-17
Playing a DVD and Video CD. . . . . . . . . . . . . . . 15
General Features . . . . . . . . . . . . . . . . . . . . . . . . 15
 Moving to another TITLE . . . . . . . . . . . . . . . 15
 Moving to another CHAPTER/TRACK . . . . . 15
 Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 15
 Still Picture and Frame-by-Frame Playback . 16
 Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
 Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
 Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
 Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 16
 Time Search . . . . . . . . . . . . . . . . . . . . . . . . 16
 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 16
 Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
 Marker Search. . . . . . . . . . . . . . . . . . . . . . . 17
Special DVD Features . . . . . . . . . . . . . . . . . . . . 17
 Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 17
 Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 17
 Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 17
 Changing the Audio Language . . . . . . . . . . . 17
 Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Operation with Audio CD and MP3 Disc . . . . . . . . 18
Playing an Audio CD and MP3 Disc . . . . . . . . . . 18
 Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
 Moving to another Track . . . . . . . . . . . . . . . 18
 Repeat Track/All/Off. . . . . . . . . . . . . . . . . . . 18
 Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
 Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
 Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 18
 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 18
 Changing the Audio Channel . . . . . . . . . . . . 18
Programmed Playback . . . . . . . . . . . . . . . . . . . . . 19
Programmed Playback with Audio CD
and MP3 Disc . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Programmed Playback with Video CD . . . . . . . . 19
 Repeat Programmed Tracks . . . . . . . . . . . . 19
 Erasing a Track from Program List . . . . . . . . 19
 Erasing the Complete Program List . . . . . . . 19
Additional Information . . . . . . . . . . . . . . . . . . . . . 21
Last Condition Memory . . . . . . . . . . . . . . . . . . . 21
Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Video Mode Setting . . . . . . . . . . . . . . . . . . . . . . 21
Notes on MP3 Discs . . . . . . . . . . . . . . . . . . . . . 21
Reference
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Language Code List . . . . . . . . . . . . . . . . . . . . . . . 23
Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . 24
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
About the symbols for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Indicates special operating features of this unit.
Indicates tips and hints for making the task easier.

4
Before Use
Playable Discs
DVD
(8 cm / 12 cm disc)
Video CD (VCD)
(8 cm / 12 cm disc)
Audio CD
(8 cm / 12 cm disc)
In addition, this unit can play a CVD (SVCD), CD-R or
CD-RW that contains audio titles or MP3 files.
Video CD and CVD (SVCD) can be avaiable only for
model T 532.
Notes
– Depending on the conditions of the recording equip-
ment or the CD-R/RW disc itself, some CD-R/RW
discs cannot be played on the unit.
– The unit cannot play discs that contain data other
than MP3 and CD-DA data.
– Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
– Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal). It may result in malfunctions.
Notes on DVDs and Video CDs
Some playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be avail-
able, or other functions may be added.
Refer also to the instructions supplied with the DVDs
and Video CDs. Some DVDs made for business pur-
poses may not be played on the unit.
Regional code of the DVD player and DVDs
This DVD player is designed and manufactured
for playback of region “2” encoded DVD soft-
ware. The region code on the labels of some DVD discs
indicates which type of player can play those discs. This
unit can play only DVD discs labeled “2” or “ALL”. If you
try to play any other discs, the message “Check Regional
Code” will appear on the TV screen. Some DVD discs
may not have a region code label even though their
playback is prohibited by area limits.
Note on DTS-encoded CDs
To avoid possible damage to the audio system, turn
down the volume before playing back such discs, adjust
the volume gradually, and keep the volume level low. To
enjoy DTS Digital SurroundTM playback, an external 5.1
channel DTS Digital SurroundTM decoder system must
be connected to the digital output of the unit.
Disc-related terms
Title (DVD only)
The main film content or accompanying feature content
or additional feature content, or music album.
Each title is assigned a title reference number enabling
you to locate it easily.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles.
A title is composed of one or several chapters. Each
chapter is assigned a chapter number, enabling you to
locate the chapter you want. Depending on the disc, no
chapters may be recorded.
Track (Video CD and audio CD only)
Sections of a picture or a musical piece on a video CD
or an audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
Scene
On a video CD with PBC (Playback control) functions,
moving pictures and still pictures are divided into sec-
tions called “Scenes”. Each scene is displayed in the
menu screen and assigned a scene number, enabling
you to locate the scene you want.
A scene is composed of one or several tracks.
Types of video CDs
There are two types of video CDs:
Video CDs equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still pictures
of high resolution can be played if they are included in
the disc.
Video CDs not equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
2

5
INTRODUCTION
Before Use (Cont’d)
Precautions
Handling the unit
When shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
the unit away from the TV, VCR, or radio, or turn off the
unit after removing the disc.
To keep the exterior surfaces clean
Do not use volatile liquids, such as insecticide spray,
near the unit. Do not leave rubber of plastic products in
contact with the unit for a long period of time. They will
leave marks on the surface.
Cleaning the unit
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents, such as alcohol,
benzine, or thinner, as these might damage the surface
of the unit.
To obtain a clear picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
Notes on Discs
Handling discs
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Storing discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
light, as there may be a considerable temperature
increase inside the car.
Cleaning discs
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the cen-
ter out.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
About Symbols
About the symbol display
“ ” may appear on the TV screen during operation.
This icon means the function explained in this owner’s
manual is not available on that specific DVD video disc.
About the disc symbols for instructions
A section whose title has one of the following symbol is
applicable only to the disc represented by the symbol.
DVD
Video CDs with the PBC (playback control)
function.
Video CDs without the PBC (playback control)
function.
Audio CDs.
MP3 disc.
MP3
CD
VCD1.1
VCD2.0
DVD

6
Front Panel and Display Window
TITLEMP3 VCD CD PROG. RANDOM ALL AB CHP/TRK DVD
Indicates current
player function:
Playback, Pause, etc.
ANGLE active
DVD inserted
CD Audio CD inserted
VCD Video CD inserted
MP3 MP3 disc inserted
DVD
TITLE Indicates current title number.
CHP/TRK Indicates current chapter or track number.
Indicates total playing time/elapsed time.
PROG. Programmed playback active.
RANDOM RANDOM playback
active.
Indicates repeat
mode.
STOP ( 99)
Stops playback.
PAUSE ( ;;)
Pause playback temporarily / press
repeatedly for frame-by-frame playback.
PLAY ( 22)
Starts playback.
OPEN/CLOSE ( //)
Opens or closes the disc tray.
Power indicator
Lights green when the player
is in Power On mode.
Remote Sensor
Point the DVD Player remote control here.
Display window
Shows the current status of the player.
Disc Tray
Insert a disc here.
POWER
Switches the player ON and OFF.
SCAN ( QQ/ RR)
Press for fast reverse search or forward search.
SKIP ( SS/ TT)
Moves to PREVIOUS or NEXT chapter/track.
11 22 33 44 (left/right/up/down), ENTER
- Selects an item in the menu.
- Acknowledges menu selection.
MENU
Accesses menu on a DVD disc.

7
INTRODUCTION
Remote Control Operation Range
Point the remote control at the remote sensor and press
the buttons.
Distance: About 23 ft (7 m) from the front of the
remote sensor
Angle: About 30° in each direction of the front of the
remote sensor
Remote control battery installation
Detach the battery cover on the rear of
the remote control, and insert two R03
(size AAA) batteries with and
aligned correctly.
Caution
Do not mix old and new batteries. Never
mix different types of batteries (stan-
dard, alkaline, etc.).
CLEAR PROGRAM
DISPLAY RETURN
SELECT
ENTER
TITLE MENU
AUDIO SUBTITLE SOUNDANGLE
SETUP REPEAT RANDOM
POWER OPEN/CLOSE
A-B
123
456
78
0
9
SLOW
ZOOM MARKER —SEARCH
PAUSE/STEP
STOP
PLAY
SCAN SKIP
POWER
Switches DVD Player ON and OFF.
SETUP •
Accesses or removes setup menu.
REPEAT •
Repeat chapter, track, title, all.
A-B •
Repeat sequence.
RANDOM •
Plays tracks in random order.
TITLE
Displays the discs Title menu, if
available.
11 22 33 44 (left/right/up/down)
Selects an item in the menu.
DISPLAY
Accesses On-Screen display
ZOOM •
Enlarges video image.
MARKER •
Marks any point during playback.
SEARCH •
Displays MARKER SEARCH menu.
NEXT DISC •
Moves to the next available disc tray.
PAUSE/STEP ( ;;) •
Pauses playback temporarily/ press
repeatedly for frame-by-frame
playback.
Reverse SLOW ( ,, ) •
Reverse slow playback.
Forward SLOW ( .. ) •
Forward slow playback.
CLEAR
Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
OPEN/CLOSE
Opens and closes the disc tray.
•AUDIO
Selects an audio language (DVD) or
an audio channel (CD).
•SUBTITLE
Selects a subtitle language.
•ANGLE
Selects a DVD camera angle if
available.
•SOUND
Selects sound mode during disc
playback.
MENU
Accesses menu on a DVD disc.
SELECT/ENTER
Acknowledges menu selection.
RETURN
- Removes the setup menu.
- Displays the menu of a video CD
with PBC.
•SCAN ( QQ/ RR)
Press for fast reverse search or for-
ward search.
•PLAY ( 22)
Starts playback.
•STOP ( 99)
Stops playback.
•SKIP ( SS/ TT )
Moves to PREVIOUS or NEXT
chapter/track.
0-9 number buttons
Selects numbered items in a menu.
PROGRAM
Accesses or removes program menu.
Remote Control

Rear Panel
8
S-VIDEO
OUT
L
R
DIGITAL
OUT
AUDIO
OUT
VIDEO
OUT
VIDEO
OUTPUT
SCART/RGB
S-VIDEO
COAXIAL
OPTICAL
DIGITAL
OUT
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
VIDEO OUTPUT Switch
Select either S-VIDEO OUT or SCART’s RGB signal,
depending on how you connected the DVD Player to
the TV.
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio
equipment.
AUDIO OUT (Left/Right)
Connect to an amplifier, receiver, or stereo
system.
*System Select switch
SCART/RGB OUT Jack
Connect to a TV with SCART jack.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
Dust protection cap
Remove the dust protection cap from the OPTICAL
DIGITAL OUT jack and connect the optical digital cable
(not supplied) securely so that the configurations of
both the cable and the connector match. Keep the dust
protection cap and always reattach the cap when not
using the connector to protect against dust intrusion.
Dust protection cap
* System Select switch
You can enjoy NTSC or PAL discs by using System
Select switch to choose the appropriate system.
PAL: Select when DVD player is connected with
PAL-TV.
NTSC: Select when DVD player is connected with
NTSC-TV.
AUTO: Select when DVD player is connected with
Multi system TV.
•When the selected System Select switch does not
coincide with the system of your TV, normal color
picture may not be displayed.
•Set System Select switch when the power is turned
off.
12V TRIGGER IN (T 532 only)
By connecting this DVD player to another NAD audio component
or system controller equipped with a 12V trigger output, you can
remotely operate the T572 power ON/OFF.
VIDEO OUT
Connect to a TV with video inputs.
AC Power Cord
Plug into the power source.
S-VIDEO OUT
Connect to a TV with S-Video inputs.

PREPARATION
9
Connections
Tips
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the player. Use only one of the connections
described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
For better sound reproduction, connect the player’s
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See “Connecting to optional equipment”on page 10.
Caution
–
Make sure the DVD Player is connected directly to the
TV. Tune the TV to the correct video input channel.
–Do not connect the DVD Player’s AUDIO OUT jack to
the phono in jack (record deck) of your audio system.
–Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
system.
Connecting to a TV
Make one of the following connections, depending on
the capabilities of your existing equipment.
When using the SCART’s RGB signal, set the Video
Output Select switch to SCART/RGB. When using
the S-VIDEO OUT jack, set the Video Output Select
switch to S-VIDEO.
Video connection (Good)
11
Connect the VIDEO OUT jack on the DVD Player to
the video in jack on the TV using the video cable
supplied (V).
22
Connect the Left and Right AUDIO OUT jacks of
the DVD Player to the audio left/right in jacks on the
TV (A) using the supplied audio cables.
S-Video connection (Better)
11
Connect the S-VIDEO OUT jack on the DVD Player
to the S-Video in jack on the TV using an optional
S-Video cable (S).
22
Connect the Left and Right AUDIO OUT jacks of
the DVD Player to the audio left/right in jacks on the
TV (A) using the supplied audio cables.
SCART connection
Connect the SCART/RGB OUT jack on the DVD Player
to the corresponding in jacks on the TV using the scart
cable (T).
Note
For using SCART’s RGB signal, set the Video Output
Select switch to “SCART/RGB”.
Note
If the TV has an S-video input, connect the DVD player
with the S-video cable. When using an S-video cable,
do not connect the yellow video cable.
L
R
Y
Pb
Pr
COMPONENT VIDEO INPUT AUDIO INPUT
L
VIDEO
INPUT
S-VIDEO
INPUT
S-VIDEO
OUT
OPTICAL
DIGITAL
OUT
L
R
Y
Pb
Pr
COMPONENT
VIDEO OUT
DIGITAL
OUT
AUDIO
OUT
VIDEO
OUT
VIDEO
OUTPUT
COMPONENT
S-VIDEO
COAXIAL
Rear of TV
Rear of DVD player
S A VC

10
Connections (Cont’d)
Connecting to Optional Equipment
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Surround
Connect the Left and Right AUDIO OUT jacks on the
DVD Player to the audio left and right in jacks on your
amplifier, receiver or stereo system, using the supplied
audio cables (A).
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2 or DTS)
11
Connect one of the DVD Player’s DIGITAL AUDIO
OUT jacks (OPTICAL Oor COAXIAL X) to the cor-
responding in jack on your amplifier. Use an option-
al digital (optical Oor coaxial X) audio cable.
22
You will need to activate the player’s digital output.
(See “Digital Audio Output”on page 13).
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Caution:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
Notes
–
If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
–Six Channel Digital Surround Sound via digital con-
nection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
–To see the audio format of the current DVD in the on-
screen display, press AUDIO.
S-VIDEO
OUT
OPTICAL
DIGITAL
OUT
L
R
DIGITAL
OUT
AUDIO
OUT
VIDEO
OUT
VIDEO
OUTPUT
COMPONENT /
PROGRESSIVE
SCAN
S-VIDEO
COAXIAL
TO TV
Amplifier (Receiver)
Rear of DVD player
AXO
L
R
AUDIO INPUTDIGITAL INPUT
OPTICAL COAXIAL

11
Before Operation
General Explanation
This manual gives the basic instructions for operating
the DVD Player. Some DVDs require specific operation
or allow only limited operation during playback. When
this occurs, the symbol appears on the TV screen,
indicating that the operation is not permitted by the DVD
Player or is not available on the disc.
On-Screen Display
General playback status can be displayed on the TV
screen. Some items can be changed on the menu.
On-screen display operation
11
Press DISPLAY during playback.
22
Press 33or 44to select an item.
The selected item will be highlighted.
33
Press 11or 22to change the setting of an item.
The number buttons can be also be used for setting
numbers (e.g., title number). For some functions,
press SELECT/ENTER to execute the setting.
Temporary Feedback Field Icons
Repeat Title
Repeat Chapter
Repeat Track (non-PBC Video CDs only)
Repeat All Tracks (non-PBC Video CDs only)
Repeat A-B
Repeat Off
Resume play from this point
Action prohibited or not available
Notes
Some discs may not provide all of the features on the
on-screen display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
OFF
A B
ALL
TRACK
CHAPT
TITLE
Items
Track Number
Time
Audio Channel
Sound
Function (Press 33 /
44to select desired item)
Shows the current track number, total number of tracks
and PBC On mode, and skip to the desired track number.
Shows the elapsed playing time (Display only)
Shows the audio channel, and
changes the audio channel.
Shows the current sound mode, and
changes the setting.
Selection Method
11
/
22
,or
Numeric, SELECT/ENTER
–
11
/
22
11
/
22
1/4
0:16:57
STER.
NORM.
VCD2.0 VCD1.1
Items
Title Number
Chapter Number
Time search
Audio language
and Digital Audio
Output mode
Subtitle language
Angle
Sound
Function (Press 33 /
44to select desired item)
Shows the current title number and total number of
titles, and skips to the desired title number.
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
Shows the current subtitles language, and
changes the setting.
Shows the current angle number and total number of
angles, and changes the angle number.
Shows the current sound mode, and
changes the setting.
Selection Method
11
/
22
,or
Numbers, SELECTS/ENTER
11
/
22
,or
Numbers , SELECTS/ENTER
Numbers , SELECTS/ENTER
11
/
22
11
/
22
11
/
22
11
/
22
1/3
1/12
0:16:57
1 ENG
D
6 CH
OFF
1/1
NORM.
DVD
PREPARATION

12
Before Operation (Cont’d)
Initial Settings
You can set your own Personal Preferences on the player.
Initial Settings General Operation
11
Press SETUP.
The setup menu appears.
22
Press 33/44to select the desired item.
The screen will show the current setting for the
selected item, as well as alternate setting(s).
33
While the desired item is selected, press 22, then
33/44to select the desired setting.
44
Press SELECT/ENTER to confirm your selection.
Some items require additional steps.
55
Press SETUP, RETURN or PLAY to exit the
setup menu.
Language
Disc Language
Select a language for the disc’s Menu, Audio and
Subtitle.
Original : The original language set for the disc is selected.
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the lan-
guage code list on page 22. If you enter the wrong language
code, press CLEAR.
Menu Language
Select a language for the setup menu. This is the menu
you see when you press SETUP.
Picture
TV Aspect
4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Panscan: Select when a standard 4:3 TV is con-
nected. Displays pictures cropped to fill your TV screen.
Either sides of the picture are cut off.
16:9 Wide: Select when a 16:9 wide TV is connected.
DVD
DVD
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Disc Audio Original
Spanish
English
Chinese
Polish
Hungarian
Russian
French
German
Italian
Other ————
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Disc Audio English
Spanish
French
German
Italian
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Disc Audio 4:3 Letterbox
4:3 Panscan
16:9 Wide
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Disc Audio Original
Spanish
English
Chinese
Polish
Hungarian
Russian
French
German
Italian
Other ————

13
Before Operation (Cont’d)
Sound
Digital Audio Output
Each DVD disc has a variety of audio output options.
Set the player’s Digital Audio Output according to the
type of audio system you use.
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM”
if you connected the DVD Player’s DIGITAL OUT jack to
a Dolby Digital decoder (or an amplifier or other equip-
ment with a Dolby Digital decoder).
Stream/PCM: Select “Stream/PCM”if you connected
the DVD Player’s DIGITAL OUT jack to an amplifier or
other equipment with a DTS decoder, Dolby Digital
decoder or MPEG decoder.
PCM: Select when connected to a 2 channel digital
stereo amplifier. The DVD player outputs sounds in the
PCM 2ch format when you play a DVD video disc
recorded on the Dolby Digital, MPEG1 or MPEG2
recording system.
Sample Frequency
To change the Sample Frequency setting, first select
the desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
Others
The DRC, Vocal and PBC settings can be changed.
Press 33/44to select the desired item and press
SELECT/ENTER. The setting of the selected item is
changed between On and Off.
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of suond. Set
DRC to On for this effect.
Vocal
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio
CDs.
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Disc Audio DRC On
Vocal On
PBC On
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Disc Audio DOLBY
DIGITAL /PCM
Stream/PCM
PCM
Sample Freq.
48 KHz
96KHz
PREPARATION

14
Before Operation (Cont’d)
Parental Control (T 532 only)
Rating (T 532 only)
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain scenes on the disc. These scenes are rated
from 1 to 8, and alternatively, more suitable scenes are
available for selection on some discs. Ratings are
country-dependent. The Parental Control feature allows
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
11
Select “Rating”on the Setup menu using the 33
and 44buttons.
22
While “Rating”is selected, press 22.
33
When you have not entered a password yet;
Enter a 4-digit password using the numbered but-
tons to create a personal 4-digit security password,
then press SELECT/ENTER. And enter the 4-digit
password again and press SELECT/ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numbered but-
tons to confirm the personal 4-digit security pass-
word, then press SELECT/ENTER.
If you make a mistake before pressing SELECT/ENTER,
press CLEAR and enter 4-digit security password again.
44
Select a rating from 1 to 8 using the 33/44but-
tons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
Ratings 1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the play-
er, all disc scenes with the same rating or lower will
be played. Higher rated scenes will not be played
unless an alternative scene is available on the disc.
The alternative must have the same rating or a
lower one. If no suitable alternative is found, play-
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
55
Press SELECT/ENTER to confirm your rating
selection, then press SETUP to exit the menu.
Country Code (T 532 only)
Enter the code of a country/area whose standards were
used to rate the DVD video disc, referring to the list
(See “Country Code List”, page 23.).
11
Select Country Code using the 33/44buttons on
the setup menu.
22
While Country Code is selected, press 2.
33
Follow step 3 of “Rating”on left.
44
Select the first character using the 33/44buttons.
55
Shift the cursor using 11/2buttons and select
the second character using 33/44buttons.
66
Press SELECT/ENTER to confirm your country
code selection, then press SETUP to exit the
menu.
Note
Confirmation of the 4-digit password is necessary when
the code is changed (see “Changing the 4-digit code”
below ).
Changing the 4-digit code
1Follow Steps 1-2 as shown above to the left (Rating).
2Enter the old code, then press SELECT/ENTER.
3Select Change using the 33/44buttons then press
SELECT/ENTER.
4Enter the new 4-digit code, then press
SELECT/ENTER.
5Enter exactly the same code a second time and veri-
fy by pressing SELECT/ENTER.
6Press SETUP to exit the menu.
If you forget your 4-digit code
If you forget your password, to clear the current pass-
word, follow the procedure below.
1Press SETUP to display the setup menu.
2Use the Number buttons to enter the 6-digit number
“210499.”
The 4-digit password is cleared. “P CLr”appears on the dis-
play. The message will appear if the disc tray is closed. It
will be on the display until you try another feature.
3Enter a new code as shown above to the left (Rating).
DVD
DVD
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Disc Audio Code Set
U S
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Disc Audio 8
7
6
5
4
3
2
1
Unlock
Change

15
Operation with DVD and Video CD
Playing a DVD and Video CD
Playback Setup
Turn on the TV and select the video input source con-
nected to the DVD player.
Audio system: Turn on the audio system
and select the input source connected to the
DVD player.
11
Press OPEN/CLOSE to open the disc tray.
22
Load your chosen disc in the tray, with the label
facing up.
When a double-sided DVD is inserted, make sure
the side you want to play is facing up.
33
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which contains a menu.
Use the 11 22 33 44 buttons to select the title/chapter
you want to view, then press SELECT/ENTER to start
playback.
Press TITLE or MENU to return to the menu screen.
Use the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
You also may set PBC to Off under setup. See page
13.
Notes
–If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
“Parental Control”, on page 14).
–DVDs may have a region code.
–Your player will not play discs that have a region code
different from your player. The region code for this
player is 2 (two).
General Features
Note
Unless stated otherwise, all operations
described use the remote control. Some
features may also be available on the Setup menu.
Moving to another TITLE
When a disc has more than one title, you can move to
another title as follows:
Press DISPLAY when playback is stopped, then
press the appropriate numbered button (0-9) to
select a title number.
Moving to another CHAPTER/TRACK
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
Press SKIP .or >briefly during playback to
select the next chapter/track or to return to the begin-
ning of the current chapter/track.
Press SKIP .twice briefly to step back to the pre-
vious chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, press 33/44to select C
(chapter) (or for a Video CD, select T for track). Then,
enter the chapter/track number using the numbered
buttons (0-9).
Note
For two-digit numbers, press the buttons in rapid
succession.
Slow Motion
1Press SLOW tor Tduring playback.
The player will enter SLOW mode.
2Use the SLOW tor Tto select the required speed:
t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or T
1/16, T1/8, T1/4 or T1/2 (forward).
3To exit slow motion mode, press PLAY.
Note
Slow motion playback in reverse is not applicable for
Video CD.
VCD1.1VCD2.0
DVD
1/3
1/12
VCD1.1
DVD
1/3
DVD
VCD2.0
DVD
VCD1.1VCD2.0
DVD
OPERATION

16
Operation with DVD and Video CD (Cont’d)
General Features (cont’d)
Still Picture and Frame-by-frame playback
1Press PAUSE/STEP during playback.
The player will now go into PAUSE mode.
2
You can advance the picture frame by frame by pressing
PAUSE/STEP repeatedly on the remote control.
Search
1Press SCAN mor Mduring playback.
The player will now go into SEARCH mode.
2Press SCAN mor Mrepeatedly to select the
required speed: mX2, mX4, mX16, mX100
(backward) or MX2, MX4, MX16, MX100
(forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
3To exit SEARCH mode, press PLAY.
Random
1Press RANDOM during playback or in stop mode.
The unit automatically begins Random Playback and
“RAND.”appears on the display window.
2To return to normal playback, press RANDOM until
“RAND.”disappears on the display window.
Tips
By pressing SKIP .or >during Random play-
back, the unit selects another title (track) and resumes
Random playback.
Note
This function only works with DVD Karaoke discs and
video CD without PBC.
Repeat
DVD Video Discs - Repeat Chapter/Title/Off
1To repeat the currently playing chapter, press
REPEAT.
The Repeat Chapter icon appears on the TV screen.
2To repeat the title currently playing, press REPEAT a
second time.
The Repeat Title icon appears on the TV screen.
3To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
Video CDs - Repeat Track/All/Off
1To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the TV screen.
2To repeat the disc currently playing, press REPEAT a
second time.
The Repeat All icon appears on the TV screen.
3To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
Note
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Repeat function. See page 13.
Repeat A-B
To repeat a sequence in a title:
1Press A-B at your chosen starting point.
A- appears briefly on the TV screen.
2Press A-B again at your chosen end point.
A-B appears briefly on the TV screen, and the repeat sequence
begins (a-b repeat appears on the player’s display).
3To cancel the sequence, press A-B.
Time Search
The Time Search function allows you to start playing at
any chosen time on the disc.
1Press DISPLAY during playback. The on-screen dis-
play appears on the screen.
The Time Search box shows the elapsed playing time of the
current disc.
2Within 10 seconds, press 33/44to select the Time
Search icon in the on-screen display.
The “-:--:--”appears in the Time Search box.
3Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes and sec-
onds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
4Within 10 seconds, press SELECT/ENTER to confirm
the start time.
Playback starts from the selected time on the disc. If you enter
an invalid time, playback will continue from the current point.
3D Surround
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
1Press SOUND to select “3D SUR”during playback.
2To turn off the 3D Surround effect, press SOUND
again to select “NORM”.
3D SUR
NORM.
DVD
-:--:--
0:16:57
DVD
OFF
A B
A *
VCD1.1VCD2.0
DVD
OFF
ALL
TRACK
TITLE
CHAPT
VCD1.1VCD2.0
DVD
VCD1.1
Karaoke DVD
VCD1.1VCD2.0
DVD
VCD1.1VCD2.0
DVD

17
Operation with DVD and Video CD (Cont’d)
General Features (cont’d)
Zoom
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1Press ZOOM during playback or still playback to acti-
vate the Zoom function.
If you press ZOOM repeatedly, the magnification level
increases up to six times.
2Use the 11/22/33/44buttons to move through the
zoomed picture.
3Press CLEAR to resume normal playback or return to
the paused image.
Note
The zoom function may not work for some DVDs.
The zoom function may not work on multi-angle
scenes.
Marker Search
You can start playback from a memorized point. Up to
nine points can be memorized.
To enter a mark, follow these steps.
1During disc playback, press MARKER when
playback reaches the spot that you want to
memorize.
The Marker icon will appear on the TV screen briefly.
2Repeat step 1 to enter up to nine Marker points on a
disc.
To Recall a Marked Scene
1During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
2Within 10 seconds, press 1/2to select a Marker num-
ber that you want to recall.
3Press SELECT/ENTER.
Playback will start from the Marked scene.
4To remove the MARKER SEARCH menu, press
SEARCH.
To clear a Marked Scene
1During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
2Press 1/2to select the Marker number that you want
to erase.
3Press CLEAR.
The Marker number will be erased from the list.
4Repeat steps 2 and 3 to erase additional Marker
numbers.
5To remove the MARKER SEARCH menu, press
SEARCH.
Special DVD Features
Checking the contents of DVD Video
discs: Menus
DVDs may contain menus that allow you to access spe-
cial features. To use the disc menu, press MENU. Then,
press the appropriate number button to select an option.
Or, use the 1/2/3/4buttons to highlight your selection,
then press SELECT/ENTER.
Title Menu
1Press TITLE.
If the current title has a menu, the menu will appear on the
screen. Otherwise, the disc menu may appear.
2The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
3To remove the title menu, press TITLE again.
Disc Menu
1Press MENU.
The disc menu is displayed.
2To remove the disc menu, press MENU again.
Camera Angle
If the disc contains scenes recorded at different camera
angles, you can change to a different camera angle
during playback.
Press ANGLE repeatedly during playback to select a
desired angle.
The number of the current angle appears on the display.
Changing the Audio Language
Press AUDIO repeatedly during playback to hear a dif-
ferent audio language or audio track.
Subtitles
Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
Note
If appears, the feature is not available on the disc.
1 ENG
DVD
1 ENG
D
6 CH
DVD
1/1
DVD
DVD
DVD
DVD
MARKER SEARCH
1/9
VCD1.1VCD2.0
DVD
VCD1.1VCD2.0
DVD
OPERATION

18
Operation with Audio CD and MP3 Disc
Playing an Audio CD and MP3 disc
The DVD Player can play MP3 formatted recordings on
CD-ROM, CD-R or CD-RW discs.
Before playing MP3 recordings, read the notes on MP3
Recordings on page 20.
11
Insert a disc and close the tray.
The menu appears on the TV screen.
Audio CD menu MP3 menu
22
Press 33/44to select a track then press PLAY.
Playback starts.
During playback, the current track’s elapsed playing
time will appear on the display.
Playback will stop at the end of the disc.
33
To stop playback at any other time, press STOP.
Pause
1Press PAUSE/STEP during playback.
2To return to playback, press PLAY or press
PAUSE/STEP again.
Moving to another Track
Press SKIP .or >briefly during playback to go
to the next track or to return to the beginning of the
current track.
Press SKIP .twice briefly to step back to the pre-
vious track.
In case of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
during playback.
Repeat Track/All/Off
1To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the menu screen.
2To repeat all tracks on a disc, press REPEAT a sec-
ond time.
The Repeat All icon appears on the menu screen.
3To cancel Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the menu screen.
Search
1Press SCAN mor Mduring playback.
The player will now go into SEARCH mode.
2Press SCAN mor Mrepeatedly to select the
required speed: mX2, mX4, mX8 (backward) or
MX2, MX4, MX8 (forward).
3Search speed and direction are indicated on the
menu screen.
4To exit SEARCH mode, press PLAY.
Random
1Press RANDOM during playback or when playback is
stopped.
The unit automatically begins Random Playback and
RANDOM or “RAND.”appears on the display window
and menu screen.
2To return to normal playback, press RANDOM repeat-
edly until RANDOM or “RAND.”disappears on the
display window and menu screen.
Repeat A-B
To repeat a sequence.
1During disc playback, press A-B at your chosen start-
ing point.
The Repeat icon and “A-”appears on the menu screen.
2Press A-B again at your chosen end point.
The Repeat icon and “AB”appears on the menu screen,
and the sequence begins to play repeatedly.
3To exit the sequence and return to normal play, press
A-B again.
The Repeat icon and “OFF”appears on the menu screen.
3D Surround
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
1Press SOUND to select “3D SUR”during playback.
2To turn off the 3D Surround effect, press SOUND
again to select “NORM”.
Changing the Audio Channel
Press AUDIO repeatedly during playback to hear a dif-
ferent audio channel (STEREO, LEFT or RIGHT).
CD
CD
CD
CD
CD
MP3CD
MP3CD
MP3CD
ProgramCD
Clear All
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
0:56:35 STER. NORM.
ProgramMP3
Clear All
TRACK 1.MP3
TRACK 2.MP3
TRACK 3.MP3
TRACK 4.MP3
TRACK 5.MP3
TRACK 6.MP3
TRACK 7.MP3
TRACK 8.MP3
00:00 1 OFF

19
Programmed Playback
VCD1.1VCD2.0
MP3CD
Programmed Playback with Audio CD
and MP3 Disc
Program allows you to store your favorite tracks for a
particular disc in the player memory.
Program can contain 32 tracks (Audio CD) or 60 tracks
(MP3 disc).
11
Insert the disc and close the tray.
The menu is displayed on the TV screen.
22
Press PROGRAM during playback or in the stop
mode to enter the Program Edit mode.
The mark will appear to the right of the word Program
on the right side of the menu screen.
Note
Press PROGRAM to exit the Program Edit mode;
the mark will disappear.
33
Press 33/44to select a track then press
SELECT/ENTER to place the selected track on
the Program list.
44
Repeat step 3 to place additional tracks on the
Program list.
Audio CD menu MP3 menu
55
Press 2.
The programmed track you selected last is highlighted on
the program list.
66
Press 33/44to select the track you want to start
playing.
Press TITLE to move to the next page.
Press MENU to move to the previous page.
77
Press PLAY to start.
Playback begins in the order in which you programmed
the tracks and “PROG.”appears on the menu screen.
Playback stops after all of the tracks on the Program list
have played once.
Programmed Playback with Video CD
Note
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Program function. See page 13.
11
Insert Video CD and close the tray.
22
Press PROGRAM while playback is stopped.
The VCD Program menu will appear.
Note
Press RETURN or PROGRAM to exit the Program menu.
33
Follow steps 3-7 of “Programmed Playback with
Audio CD and MP3 Disc”on left.
Repeat Programmed Tracks
To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the menu screen.
To repeat all tracks on the program list, press
REPEAT a second time.
The Repeat All icon appears on the menu screen.
To cancel Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the menu screen.
Erasing a Track from Program List
1Press PROGRAM during playback or in the stop
mode to enter the Program Edit mode.
The mark will appear.
2Press 2to move to the Program list.
3Use 33/44to select the track that you wish to erase
from the Program list.
4Press CLEAR.
The track will be erased from the Program list.
Erasing the Complete Program List
1Follow steps 1-2 of “Erasing a Track from Program
List”as above.
2Use 33/44to select “Clear All”, then press
SELECT/ENTER.
The complete Program for the disc will be erased.
The programs are also cleared when the disc is removed.
To resume normal playback from programmed
playback
Press and hold PROGRAM for 3 seconds until “PROG.”
indicator disappears in the display window.
E
E
E
ProgramCD
Clear All
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 12
TRACK 8
TRACK 10
TRACK 3
TRACK 5
TRACK 6
TRACK 7
TRACK 8
STER. NORM.
E
0:56:35
ProgramMP3
Clear All
TRACK 1.MP3
TRACK 2.MP3
TRACK 3.MP3
TRACK 4.MP3
TRACK 8.MP3
TRACK 2.MP3
TRACK 4.MP3
TRACK 3.MP3
TRACK 5.MP3
TRACK 6.MP3
TRACK 7.MP3
TRACK 8.MP3
00:00 1 OFF
E
VCD
Clear All
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
Program
E
OPERATION

20
Additional Information
Last Condition Memory (T 532 only)
This player memorizes the last condition for the last
disc you have watched. Settings remain in memory
even if you remove the disc from the player or switch off
the player. If you load a disc that has its settings memo-
rized, the latest stop position is automatically recalled.
Notes
–Settings are stored in memory for use any time.
–This player does not memorize settings of a disc if
you switch off the player before commencing to play
it.
Screen Saver
The screen saver picture appears when you leave the
DVD Player in stop mode for about five minutes.
After the Screen Saver has been engaged for about five
minutes, the DVD Player will automatically turn itself off.
Video Mode Setting
With certain discs, the playback picture may be flick-
ering or Dot Crawl is shown on straight lines. That
means Vertical interpolation or De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
To change the video mode, press and hold DISPLAY
about 3 seconds during disc playback. The new video
mode number selected is displayed on the TV screen.
Check whether the video quality has improved. If not,
repeat the above procedure until picture quality is
improved.
Video mode change sequence:
MODE1 → MODE2 →MODE3 →MODE4 →
MODE5 → MODE1
If you turn off the the power, the video mode will be
back to initial state (MODE1).
Notes on MP3 Discs
About MP3

An MP3 file is audio data compressed by using
MPEG1, the audio layer-3 file-coding scheme. We call
files that have the “.mp3”file extension “MP3 files”.
The player can not read an MP3 file that has a file
extension other than “.mp3”.
The player can not read a fake MP3 file that has a
file extension “.mp3”.
MP3 Disc compatibility with this player is limit-
ed as follows:
1. Sampling Frequency / only at 44.1kHz
2. Bit rate / within 32 - 320kbps
3. CD-R physical format should be “ISO 9660”
4. If you record MP3 files using the software which
cannot create a FILE SYSTEM, for example “Direct-
CD”etc., it is impossible to playback MP3 files. We
therefore recommend that you use “Easy-CD
Creator”, which creates an ISO9660 file system.
5. A single session disc requires MP3 files in the first
track. If there is no MP3 file in the 1st track, it can-
not playback MP3 files. If you wish to playback MP3
files, format all the data in the disc or use a new
one.
6. We do not recommend using CD-RW discs. Please
use finished CD-R discs only.
7. File names should be named using 8 letters or less
and must incorporate “.mp3”extension
e.g. “********.MP3”.
8. Do not use special letters such as “_?!><+*}{`[@
]:;\/.,”etc.
9. Total number of files on the disc should be less than
200.
10. Use 74 minute CD-R discs (650M), Do not use 80
minute CD-R (700M) software
This DVD player requires discs/recordings to meet
certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically
set to these standards. There are many different types
of recordable disc formats (including CD-R containing
MP3 files).
Customers should also note that permission is required
in order to download MP3 files and music from the
Internet. Our company has no right to grant such per-
mission. Permission should always be sought from the
copyright owner.
VCD1.1VCD2.0
DVD
VCD1.1
CDDVD