NADAMOO E3000 User manual

第1 页共50 页
consumption
NADAMOO
User Guide
This User Guide Applies to E3000（H）（E3100（H））
V1.1.1

About This User Guide
Pls read all the content of the user guide carefully to use the products safely and effectively.
You are advised of keeping it properly for your using reference.
Disclaimer
Please do not dismantle the product or tear up the seal on it, otherwise we won’t provide
warranty or replacement service.
The pictures in this user guide are for reference only. If there are any pictures which not
match the actual product, please take actual products as the standard. Updated information
is subject to change without notice.
All information contained in this guide are protected by copyright, and our company
reserves all rights.All or part of this guide is prohibited to excerpt, copy, bundle other
products, or sell without the written permission from us.
Version Record
Version number
Version description
Version date
V0.0.1
Add part of unrecognized setting code
2015.05.26
V0.0.2
1. Add lights and position light control
2. Add communication mode: USB, KBW and USB
serial port
3. Trigger mode add auto-induction mode
2015.07.27
V0.0.3
Add default configuration parameter selection (including
default configuration 1 and default configuration 2)
2015.08.04
V0.0.4
Add the difference between 1D and 2D software
2015.10.14
V0.0.5
Optimize the function of auto-induction mode
2015.10.19
V0.0.6
1D supports auto- induction mode
2015.12.02
V0.0.7
Add 5 default configurations
2015.12.17
V0.0.8
Add automatic line breaking
2016.01.07
V0.0.9
Implement the default configuration 3
2016.01.22

V0.1.0
Output all product information by setting the code
2016.01.27
V0.1.1
1D added to identify both bar codes at the same time
2016.03.25
V0.1.2
1. Communication mode added to support AUTO UK
andAUTO UV V
2. DM add the multi-code reading mode
2016.05.06
V0.1.3
Add 2D code packet format description
2016.05.25
V0.1.4
2D code added to support Aztec Code, MaxiCode and
Han Xin Code
2016.06.07
V0.1.5
Add the default configuration 4
2016.06.17
V1.0.0
Official version
2016.10.31
V1.0.1
Add prompt switch function
Add matrix 25 code and standard 25 code
2016.11.17
V1.0.2
Add specific SSI instructions
2017.02.21
V1.0.3
Add new function
Modify some contents of the manual
2017.04.21
V1.0.4
Add event report, Wiegand, PS2, set password mode,
disable passive trigger scan, instruction form
2017.06.15
V1.3.12
1. Solve the problem of VAT invoice output
2017.06.29
V1.3.13
1. USB KBW added to support UTF8 Turkish
2017.07.03
V1.3.16
1. Support Baivang WeChat invoice
2017.07.16
1.Invoice support:Alipay, Baiwang invoice assistant, tax
invoice assistant, 51 invoice
2.Add the selection of special invoice (default) and
ordinary invoice.
3.Add lock keyboard status function
2017.07.31
V1.3.17

Catalog
1、Product Introduction.................................................................................................................................. 1
1.1 Main feature ...................................................................................................................................... 1
1.2 Unpack your device........................................................................................................................... 1
1.3Product display................................................................................................................................... 2
1.3.1 External view........................................................................................................................... 2
1.3.2 Size（mm）............................................................................................................................ 2
1.4 Interface description.......................................................................................................................... 2
1.5 Communication port.......................................................................................................................... 3
1.6 Peripheral circuit diagram................................................................................................................. 4
1.6.1 buzzer..................................................................................................................................... 4
1.6.2 button...................................................................................................................................... 4
1.6.3 LED......................................................................................................................................... 5
1.7 Communication port.......................................................................................................................... 5
1.8 Supported code system.................................................................................................................... 6
1.9 Start-up, shutdown, standby and restart.......................................................................................... 6
1.10 Maintenance.................................................................................................................................... 7
1.11 Reading skills.................................................................................................................................. 7
2、barcode setting ......................................................................................................................................... 8
2.1 Mark setting....................................................................................................................................... 8
2.2 Setting barcodes............................................................................................................................... 8

2.2.1 Reset to default configuration ................................................................................................ 8
2.2.2 Communication mode setting................................................................................................. 8
2.2.3 Decode scanning time setting................................................................................................ 9
2.2.4 trigger mode setting................................................................................................................ 9
2.2.5 scan time interval setting of the same barcode (continuous scanning mode) ....................10
2.2.6 scan time interval setting of the same barcode (Auto mode)...............................................10
2.2.7 Data uploading format...........................................................................................................10
2.2.8 Turn on/Turn off configuration code......................................................................................11
2.2.9 Enable\Disable sending setting code....................................................................................11
2.2.10 Power mode.........................................................................................................................11
2.2.11 Sensitivity setting.................................................................................................................11
2.2.12 Invoice automatic identification and output (only for China) ..............................................12
2.2.13 Invoice character type (only for China)...............................................................................12
2.2.14 Invoice type (only for China)...............................................................................................13
2.3 Volume and light setting...................................................................................................................13
2.3.1 indicator light setting..............................................................................................................13
2.3.2 Successful decode indicate setting.......................................................................................13
2.3.3 Volume setting.......................................................................................................................13
2.3.4 Mute setting ...........................................................................................................................14
2.3.5 Starting up sound setting.......................................................................................................14
2.3.6 setting code volume...............................................................................................................14
2.3.7 LED setting............................................................................................................................14

2.3.8 positioning lamp setting.........................................................................................................15
2.4 Enable\Disable decode function......................................................................................................15
2.4.1 code system character output...............................................................................................15
2.4.2 Enable/Disable UPC-A..........................................................................................................15
2.4.3 Enable/Disable UPC-E..........................................................................................................16
2.4.4 Enable/Disable EAN-8...........................................................................................................16
2.4.5 Enable/Disable EAN-13.........................................................................................................16
2.4.6 Enable/Disable Bookland EAN(ISBN) ..................................................................................16
2.4.7 Bookland EAN(ISBN)............................................................................................................17
2.4.8 UPC/EAN Addendum Code ..................................................................................................17
2.4.9 Convert UPC-E TO UPC-A...................................................................................................17
2.4.10 Enable/Disable Code 128....................................................................................................17
2.4.11 Enable/Disable GS1-128.....................................................................................................18
2.4.12 Enable/Disable Code 39......................................................................................................18
2.4.13 Enable/Disable Code 93......................................................................................................18
2.4.14 Enable/Disable Code 11......................................................................................................18
2.4.15 Enable/Disable ITF25..........................................................................................................19
2.4.16 Enable/Disable industrial ITF25..........................................................................................19
2.4.17 Enable/Disable Codabar .....................................................................................................19
2.4.18 Enable/Disable MSI.............................................................................................................19
2.4.19 Enable/Disable GS1 DataBar(RSS) 14 ..............................................................................19
2.4.20 Enable/Disable PDF417......................................................................................................20

2.4.21 Enable/Disable QR..............................................................................................................20
2.4.22 Enable/Disable single/double QR.......................................................................................20
2.4.23 Enable/Disable MicroQRCode............................................................................................21
2.4.24 Enable/Disable Data Matrix(DM) ........................................................................................21
2.4.25 Enable/Disable Maxi Code..................................................................................................21
2.4.26 Enable/DisableAztec Code.................................................................................................21
2.4.27 Enable/Disable Chinese code.............................................................................................21
2.5 serial port communication setting....................................................................................................22
2.5.1 Baud rate setting....................................................................................................................22
2.5.2 check bit setting.....................................................................................................................22
2.5.3 stop bit setting........................................................................................................................23
2.5.4 The retard of characters........................................................................................................23
2.6 Prefix and suffix setting....................................................................................................................24
2.6.1 Prefix and suffix setting .........................................................................................................24
2.6.2 compound mode setting........................................................................................................24
2.7 Mark barcode transfer type setting..................................................................................................25
2.7.1 Disable mark barcode transfer type......................................................................................25
2.7.2 Enable mark barcode transfer type.......................................................................................25
2.8 Chinese character encode...............................................................................................................26
2.8.1 Disable Chinese character encode.......................................................................................26
2.8.2 GBK(GB2312)........................................................................................................................26
2.8.3 UNICODE ..............................................................................................................................26

3、Serial port instructions.............................................................................................................................27
3.1 Basic Configuration..........................................................................................................................27
3.2 Volume and light setting...................................................................................................................28
3.3 Enable\Disable decode function......................................................................................................30
3.4 serial port communication setting....................................................................................................32
3.5 Prefix and suffix setting....................................................................................................................33
3.6 Mark barcode transfer type setting..................................................................................................33
appendix.........................................................................................................................................................35
Appendix 1 Number setting code ..........................................................................................................35
Appendix 2 set prefix and suffix by serial port instructions...................................................................37
Appendix 3 : barcode sample................................................................................................................41

1
1、Product Introduction
This user guide applies to E3000（H）（ E3100（H））, which identify 1D&2D barcodes
by 2D image scanning pattern. The scanners above are of strong identification capability,
and support automatic continuous scanning mode with fast and flexible scanning speed.
In this chapter, we will introduce the instruction of scanner with pictures, please
compare to the scanner you bought when reading this user guide, which is good for your
understanding. This chapter applies to regular users, maintenance personnel, and software
developers.
1.1 Main feature
* Complete independent research and development, possessing the complete set of
patent, plug and play without the need to install driver.
* Wide voltage design to avoid the data can’t be transmitted due to voltage fluctuation.
* 32-bit master chip equipped with patented software, the scanner can smoothly decode
reflective, wrinkled, blurred, and colorful barcode, and can also normally scan in light and
dark environment.
* Adopt all tantalum capacitors and anti-oxidation optical technology, avoiding the
problem of sensitivity declining after long-term using.
1.2 Unpack your device
After you open the shipping carton containing the product, take the following steps:
Take out the accessories from package.
Check with the packing list to see if everything is complete and in good condition.
If there are any damaged or missing components, please keep the original
package and contact your supplier for after-sales service.

2
1.3 Product display
1.3.1 External view
1.3.2 Size（mm）
1.4 Interface description
Product standard interfaces are: RS232 (DB9 orifice), TTL, USB Keyboard（USD HID）,
Keyboard and Wiegand. Standard interface of different products are not the same, please
confirm before purchase, other interfaces can be customized according to customer needs.

3
1.5 Communication port
Interface NO.
Name
Type
Description
1
NC
Empty
Spare
2
VDD
DC power supply
DC3.3V
3
GND
Digital ground
GND
4
Rx
Input
Serial input port TTL level
5
Tx
output
Serial input port TTL level
6
USB_D-
Input / output
USB_D- signal
7
USB_D+
Input / output
USB_D+ signal
8
NC
Empty
Spare
9
BPR
output
Buzzer output signal
10
LED
output
Indicator light output signal
11
NC
Input
Reset signal input, Active low. Maintain
more than100us can reset product.
12
TRIG
Input
Trigger to scan

4
1.6 Peripheral circuit diagram
1.6.1 buzzer
1.6.2 button

5
1.6.3 LED
1.7 Communication port
The scanner must be connected to a host to operate. Host can be a PC, POS machine, intelligent
terminal with USB or RS-232 interface.
USB
USB interface on host
RS-232
RS-232 interface on host

6
1.8 Supported code system
Support code system as follows, you can open the relevant code through the menu or serial
command
bar code type
Default
open
minimum
length
bar code ID
CODE 39
√
3
A
CODE 128
√
3
C
UPC/EAN
√
13
E
CODEBAR
x
4
F
CODE 93
x
3
G
CODE 11
x
3
H
INTERLEAVED 2 OF 5
（交叉 25）
√
4
I
MSI
x
3
M
DISCRETE 2 OF 5
（工业 25）
x
4
S
HAN XIN
x
3
X
GS1 DATABAR
x
3
e
PDF417
√
3
L
DATA MATRIX(DM)
√
3
d
QR
√
3
Q
MicroQRCode
√
3
Q
AZTEC CODE
x
3
z
MAXI CODE
x
3
U
1.9 Start-up, shutdown, standby and restart
Start-up：Connect host computer with scanner, which will automatically start-up and in working state.
Shutdown：Removethedata cablewhich is connected with scanner; removethe USB which is connected
with host computer; remove the power adapter which is inserted into RS-232 serial port.
Standby：Scanner with automatic sleep standby function, if 30 minutes without work it will be in standby
mode, but it will automatically start-up when barcode approach.
Restart：If the scanner crashes or doesn't respond, please switch it off and restart.

7
1.10 Maintenance
* The window must be kept clean, the supplier do not bear the guarantee responsibility due to the
improper maintenance.
*Avoid the window being wear and tear or scratched by hard object
* Use the hairbrush to remove the stain on the window
* Clean the window with a soft cloth, such as lens cleaning cloth
* Spraying liquid onto the window is prohibited.
* Prohibit any cleaning solvents, except for the cleaning water.
1.11 Reading skills
If the barcode is small,it should becloser to the scanning window;if thebarcodeis large,it should be
far away from the scanning window a little more, thus easier to be read correctly.
If the barcode is highly reflective (for example, the coated surface), you may need to tilt the barcode
at an angle to successfully scan it.
Barcode scanning example：

8
Reset to default configuration
2、barcode setting
Option and function setting mainly through reading a series of special barcodes. In this chapter, we
will provide you a detailed introduction of the options and functions available for user setting, and the
corresponding setup code.
This method of setting the scanning is direct, easy to understand and user friendly.
2.1 Mark setting
2.2 Setting barcodes
2.2.1 Reset to default configuration
2.2.2 Communication mode setting
USB virtual serial port
USB
Serial port
Reset to default configuration
1
2
Reset to default configuration

9
Reset to default configuration
2.2.3 Decode scanning time setting
This barcode is used to set the most longest decoding time in the range of 0.50 to 25.5 second when
scanner reading barcode. First scan below barcode enter setting mode, then scan three numbers from
the appendix. Use 0 to make up three numbers if the time you want to set less than three numbers. For
example, you want to set 0.5 second as decode scanning time, you should scan “0””0””5” at the appendix.
If you want to set 10.5 as decode scanning time, you should scan”1””0””5” at the appendix. If you want to
change or cancel one incorrect setting, scan the “cancel setting” in the appendix.
2.2.4 trigger mode setting
Choose one of the below mode as trigger event for scanning engine
Scan(standard)-press trigger to active red light to decode barcode, the red light will stay on and
decoding until you release the trigger or exceed the decode scanning time.
Scan(pulse)- press trigger to active red light to decode barcode, the red light will stay on until
successfully read the barcode or exceed the decode scanning time.
Continue scanning mode- Red light always on and able to decode barcode all the time.
Auto mode- Barcode scanner module start depending on ambient brightness.
Host trigger mode- Host give serial port orders, trigger scanner module start.
Scan（standard）
Scan （pulse）
Continuous scanning mode
Auto mode
Host trigger mode
Decode scanning time setting(default：3 second)

10
Reset to default configuration
Host trigger mode setting step：
1、wake up operation: Send 0x00 first, then send effective instruction after 50ms,
（factory default is power saving mode ）
2、start scan:04 E4 04 00 FF 14
3、end scan:04 E5 04 00 FF 13
4、after end scan, scanner module time-out in 800ms without working
remark：If you want to omit step 1 and 4, please change power mode to continuous power mode
2.2.5 scan time interval setting of the same barcode (continuous scanning mode)
When the scanner is in continuous scanning mode, this re-scanning setting will come out the result
with one barcode when you scan two identical barcodes, which reduce the risks of scan the identical
barcodes. The interval time is in the range of 0.0 second to 9.9 second, the smallest unit is 0.1 second. If
you want toset the interval time, scan the below barcode first,then scan two numbers as the interval time.
Use 0 to make up three numbers if the time you want to set less than two numbers. For example, you
want to set 0.5 second as interval time, scan the barcode below then scan”0””5” at the appendix. If you
want to change or cancel one incorrect setting, scan the “cancel setting” in the appendix.
2.2.6 scan time interval setting of the same barcode (Auto mode)
When the scanner is in auto mode, this re-scanning setting will come out the result with one barcode
when you scan two identical barcodes, which reduce the risks of scan the identical barcodes. The interval
time is in the range of 0.0 second to 9.9 second, the smallest unit is 0.1 second. If you want to set the
interval time, scan the below barcode first, then scan two numbers as the interval time. Use 0 to make up
threenumbers if thetime you want to set less than two numbers. For example, you want to set 0.5 second
as interval time, scan the barcode below then scan”0””5” at the appendix. If you want to change or cancel
one incorrect setting, scan the “cancel setting” in the appendix.
2.2.7 Data uploading format
Data uploading format: barcode + suffix character。
Cancel suffix character
Re-scanning time (default: 1.0 second)
CRLF
Re-scanning time (default: 1.5 second)

11
Reset to default configuration
2.2.8 Turn on/Turn off configuration code
2.2.9 Enable\Disable sending setting code
2.2.10 Power mode
In power saving mode scanner module time-out after a period of time without working. In continuous
power mode scanner module keep awake.
2.2.11 Sensitivity setting
To set sensitivity when the barcode scanner is in auto mode.
Query this parameter you can get a number feedback represent the sensitivity level. Special level:0,
Disable Configuration Code
Enable Configuration Code
Enter
TAB
Enable sending setting code
Disable sending setting code
Continuous power mode
Power saving mode（default）

12
Reset to default configuration
high level:1, middle level:8, low level:15. Default: high level.
2.2.12 Invoice automatic identification and output (only for China)
2.2.13 Invoice character type (only for China)
Low sensitivity
Special sensitivity
High sensitivity
Middle sensitivity
close（default）
open
English character--default
on
UTF8 character