Nakamichi NA5501 User manual
1$
8VHU0DQXDO
&'9&''9'0386%3/$<(5
*36%/8(7227+
:,7+)0$0781(5
1
Safety Precautions
Do not change the fuse on the power cord
without professional guidance. Using an
improper fuse may cause damage to this unit
or een cause re.
Please contact your nearest dealer if one of
the following is experienced:
(a). Water or other objects enter the unit.
(b). There is smoke.
(c). Peculiar smell.
Only connect the unit to a 12-volt power
supply with negative grounding.
Never install this unit where operating it may
impair safe driving conditions.
Never use the front video display function
when drivingso as to prevent violating trafc
regulations or causing an accident.
Thank you for purchasing this product. Please
read through these operating instructions
so you will know how to operate your model
properly. Please keep this manual in a safe
place for future reference.
To ensure safe driving, please adjust the
volume to a safe and comfortable level in
case of emergency situations.
Never expose this unit, amplifier, and
speakers to moisture or water to prevent
electric sparks or re.
Caution of Disc Using
1. Never insert a 3-inch ( 8cm ) CD
contained in the adapter or an irregularly
shaped CD. The unit may not be able to
eject it,resulting in a malfunction.
2. Disc Cleaning. Use a dry, soft cloth to wipe
the disc from center to edge, only neutral
detergent can be used.
3. When playing a new disc. New disc may
have some rough spots around the inner and
outer edges. If such a disc is used, remove
these rough spots with a pencil or ball-point
pen, etc.
Caution
This product is a CLASS 1 LASER
PRODUCT. Use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous
radiation exposure. Do not open covers and
do not repair yourself. Refer servicing to
ualied personnel.
2
1. Never disassemble or adjust the unit without professional guidance.
For details, please consult an authorised service provider or dealer.
2. If the front panel or TFT monitor is dirty, please use a clean silicone cloth and neutral detergent
to clean. Using a rough cloth and non-neutral detergent such as alcohol for cleaning may
scratch or discolour the monitor.
3. If the unit does not function normally , please refer to the troubleshooting guide of this manual.
If no relevant information is found, please press the [RESET] button on the front panel to
resume factory default.
4. If you have parked the car in hot or cold weather for a long time, please wait until the
temperature in the car becomes normal before operating the unit.
5. Using the car heater in a low temperature environment may result in moisture collecting inside
the unit, DO NOT use the unit in this situation. Eject the disc and wipe off the moisture on the
disc. If the unit does not work after a few hours, please contact the service center.
6. Do not drop or bang the LCD monitor as this will damage it.
7. To prevent damage to the screen, avoid touching it with sharp objects.
8. Graphic illustrations are used to provide a clear demonstration and an easy way to understand
how to operate this unit.
However, some illustrations are different from the actual images displayed on the screen.
9. Only operate the unit as described in this manual . Inappropriate operation will void the
guarantee.
Safety Precautions
Note:The items listed outside of the frame are the commercial products generally sold.
Expanding Systems
BT
1
3
Contents
Safety Precautions ...................................1
Before Using .............................................4
Front Panel .............................................4
Remote Control.......................................5
Notes on Remote Control Usage............6
Uninstall Battery......................................6
Install Battery..........................................6
Basic Operations......................................7
Parking Brake Inhibit...............................7
Mute........................................................7
OSD language Selection ........................7
Power On / Off........................................7
Audible Beep Conrmation.....................7
Playing Source Selection........................7
Volume Adjustment.................................7
EQ Menu.................................................7
Select Preset Equalizer ..........................8
Adjust EQ Parameters............................8
Adjust Fader/Balance .............................8
Set Date /Time........................................9
Radio Mode .............................................10
Tuner TFT Display................................10
Select Radio as Playing Source ...........10
Select One Radio Band ........................10
Tune......................................................10
Preset Station .......................................11
Local Seeking .......................................11
EQ Selection.........................................11
RDS Basics...........................................11
Adjust RDS Settings .............................11
RDS ( Radio Data System )..................11
AF Function ..........................................12
EON Function .......................................12
TA Function ..........................................12
CT Function ..........................................12
PTY Function........................................12
Playback Mode........................................13
Load a Disc...........................................13
Eject a Disc...........................................13
Touch Screen Controls.........................13
Controlling Playback.............................13
Connect a USB Device.........................13
Remove a USB Device.........................13
Insert/Remove a SD Card.....................13
Play/Pause............................................14
Previous/Next .......................................14
Search for a Folder...............................14
Repeat ..................................................14
Repeat A-B ...........................................14
Shufe (Random) Play..........................15
Select Audio Mode................................15
Select Subtitle Language......................15
Change Viewing Angle .........................15
Video Setup ..........................................15
Playback Information ............................15
Direct Track Entry.................................16
Rotate Pictures .....................................16
Zoom.....................................................16
Bluetooth Mode ......................................17
Pair the Bluetooth-enabled Devices .....17
Disconnect Bluetooth Device................17
Make a Call...........................................17
Answer an Incoming Call......................17
Adjust Bluetooth Settings......................18
Music Mode A2DP................................18
AVRCP .................................................18
Settings ...................................................19
Display System.....................................19
Adjust General Settings........................19
Calibration.............................................19
Adjust Video Settings............................19
Adjust Sound Settings ..........................20
Adjust Time Settings.............................20
Adjust Language Settings.....................20
Adjust Bluetooch Settings.....................20
Adjust DVD Rating................................20
Adjust Volume Settings.........................21
Other Modes............................................22
Listen to Other Devices ........................22
Reset ....................................................22
Replace a Fuse.....................................22
GPS ......................................................22
Steering Wheel Control Programming..22
TV(Ready) ............................................22
5RGEKſECVKQPU .........................................23
Troubleshooting .....................................25
Installation...............................................26
Wire Connections...................................27
Quick Start Guide ...................................28
4
Front Panel
Before Using
Notice:
The graphic in this manual is for reference only, and may be different from the actual unit.
Reference to actual unit is suggested.
1.[ ] Button
Press to eject a disc.
2.[ ] Button
Press to turn the unit ON. Press and hold to turn the unit OFF.
Press momentarily to activate the MUTE function. Press again to resume normal listening.
3.[]Home Button
4.[] Button
Press to increase the volume . Press and hold to increase the volume continuously.
5.[] Button
Press to decrease the volume in steps. Press and hold to decrease the volume continuously.
6.Internal Microphone
Internal microphone for Bluetooth calls.
7.SD Interface Connector
Insert an Micro SD card for playback of music/video les.
8. USB Connector
Connect a USB device for playback of music/video les.
9.Reset Button
10.Map Slot
The Micro SD card is used for the Navigation Map only, not for music or other les. This may be
used for rmware updates if required.
11.Disc slot
12. Remote sensor
Press to reset system settings to factory default (except password and parental lock settings).
USB
S
RESET
D
10
1112
1
5
Before Using
Remote Control
1. Return to the home menu
2. Eject the disc
3. Access to tuner source
4. Access to disc source
5. - Search an available radio station by
decreasing tuning frequency
- Select the previous chapter/track for
playback
6. Select radio band
7. - Zoom in(Video menu of DVD/VCD)
- Access to music list (Auido menu of
music playing)
8. Adjust screen settings
9. Open EQ menu
10. Menu cursor
11. Enter
12. - Open route menu (DVD)
- Turns on/off PBC (VCD)
13. Digit area
14. Repeat playback
15. Change to next source
16. Power on/off
17. Access to Bluetooth source
18. Access to navigation source
19. Pause playback/Start playback
20. - Search an available radio station by
increasing tuning frequency
- Select the next chapter/track for
playback
21. - Playback disc in different angle for a
scene (DVD)
- Rotate (photo playing)
- Access to video list
22. - Language selection for subtitle (DVD)
- Access to photo list
23. Change the audio language for disc
playback (DVD)
24. Increase/Decrease volume
25. Access to settings source
26. Mute On/Off Audio Output
27. Activate direct access mode
28. Dial/Receive a call
29. Hang up
30. Play all chapter/tracks in random order
31. - Press to clear the number one by one
- Hold to clear all the numbers
6
Before Using
Notes on Remote Control Usage
$LPWKHUHPRWHFRQWURODWWKHUHPRWHVHQVRURQWKHXQLW
5HSODFHWKHEDWWHU\IURPWKHUHPRWHFRQWURORULQVHUWDEDWWHU\LQVXODWRULIWKHEDWWHU\KDVQRW
EHHQXVHGIRUDPRQWKRUORQJHU
'2127VWRUHWKHUHPRWHFRQWUROLQGLUHFWVXQOLJKWRULQKLJKWHPSHUDWXUHHQYLURQPHQWRULW
PD\QRWIXQFWLRQSURSHUO\
7KHEDWWHU\FDQZRUNIRUPRQWKVXQGHUQRUPDOFRQGLWLRQ,IWKHUHPRWHFRQWUROZRQ¶WZRUN
SOHDVHFKDQJHWKHEDWWHU\
8VH³EXWWRQVKDSHG´OLWKLXPEDWWHU\³&5´9RQO\
'2127UHFKDUJHGLVDVVHPEOHKHDWRUH[SRVHWKHEDWWHU\LQILUH
,QVHUWWKHEDWWHU\LQSURSHUGLUHFWLRQDFFRUGLQJWRWKHDQGSROHV
6WRUHWKHEDWWHU\LQDSODFHZKHUHFKLOGUHQFDQQRWUHDFKWRDYRLGWKHULVNRIDFFLGHQW
Uninstall Battery
Slide out the battery compartment tray
at the bottom on the back of the remote
control.
Install Battery
Use button-shaped lithium battery
CR2025 (3V)” only. Insert the battery
to the battery tray with proper direction
according to the (+) and (-) poles.
PULL OUT PUSH IN
7
Parking Brake Inhibit
:hen the ³BRA.E´cable is connected to
the brake switch, the display on the TFT
monitor will display video only when the
vehicle is applied.
Parking brake function is overridden when
the video source is set to REVERSE.
:hen the parking brake inhibit is active,
the front monitor displays ³:AR1I1* Do
not watch video while driving´, preventing
the driver from watching content while
driving. Rear video screens are not
affected.
Mute
Press [ ] button to mute the volume from
the unit. Press again to restore the volume.
[[ ] is displayed on the LCD. Adjusting
the volume or using any of the audio setup
features cancels the mute function.
OSD language Selection
1. The available OSD languages are
displayed when power on first time or after
reset the unit.
Tap a language.
The OSD language is changed to the
selected language immediately.
2. You can also select language in the
settings.
Power On / Off
Press the [ ]button on the unit to turn the
unit on.
Press and hold the []button to power off
the unit.
#WFKDNG$GGR%QPſTOCVKQP
An audible beep tone con¿rms each function
selection. The Beep tone can be disabled
through the Setup menu.
Basic Operations
Playing Source Selection
Press the []button on the front panel to
change between available playing sources.
The playing mode is displayed on the screen.
'DWHDQG7LPHGLVSOD\
)XQFWLRQLFRQV
RU 7RXFKWKLVSDJHEXWWRQWRYLHZ
WKHILUVWRUVHFRQGSDJHRIRQVFUHHQ
EXWWRQV<RXDOVRFDQGUDJOHIWRUULJKWRQ
WKHEODQNDUHDWRVZLWFKWKHSDJHV
7RXFKWR6HWWLQJVIXQFLRQ
7RXFKIRUTXLFNDFFHVVWR(TXDOL]HUOHYHO
VHWWLQJV
Volume Adjustment
To increase or decrease the volume level,
turn the [ ] / [ ]button on the front
panel. The volume ranges from ³0´to ³50´.
The LCD or TFT screen displays the volume
level for 3 seconds.
EQ Menu
The Audio Control feature allows you to
easily adjust your audio system to meet the
acoustic characteristics of your vehicle, which
vary depending on the type of vehicle and its
measurements. Proper setting of the Fader
and Balance boosts the effects of the cabin
equalizer.
8
Basic Operations
Select Preset Equalizer
(QWHUWKH(4VHWXSPRGH
7RXFKWKH> @LFRQLQWKHXVHULQWHUIDFH
DQGWKH(4VHWXSLQWHUIDFHZLOOGLVSOD\RQ
WKHVFUHHQ
6HOHFW(4PRGH
Â>2SWLPDO@Â>&ODVVLF@
Â>5RFN@Â>-D]]@
Â>7HFKQR@Â>3RS@
>5(6(7@&DQFHOWKHHTXDOL]HUIXQFWLRQ
VHWWLQJV
Adjust EQ Parameters
7RDGMXVW(4SDUDPHWHUVWRXFKWKH
SDUDPHWHUVDGMXVWPHQWEDU
7RXFK> @> @WRDGMXVWWKHSDUDPHWHUV
>8VHU@6HWWKHGHVLUHGDXGLRHIIHFW
>)ODW@6HOHFWWKHRULJLQDODXGLRHIIHFW
>5HVHW@&DQFHOWKHHTXDOL]HUIXQFWLRQ
VHWWLQJV
>/RXG2Q2II@ :KHQOLVWHQLQJWRPXVLFDW
ORZYROXPHVWKLVIHDWXUH
ZLOOVHOHFWLYHO\ERRVW
FHUWDLQEDVVDQGWUHEOH
IUHTXHQFLHV
Adjust Fader/Balance
<RXFDQDGMXVWIURQWEDFNOHIWULJKWEDODQFH
RIWKHVSHDNHUDQGWKHVXEZRRIHUYROXPHWR
JHWODUUXSLQJOLVWHQLQJHIIHFWDFFRUGLQJWRWKH
VXUURXQGLQJVDQG\RXULQWHUHVW
(QWHUWKH(4VHWXSPRGH
7RXFKWKH> @LFRQLQWKHXVHULQWHUIDFH
DQGWKH(4VHWXSLQWHUIDFHZLOOGLVSOD\RQ
WKHVFUHHQ
$GMXVWVXEZRRIHUYROXPH
7RXFK> @> @RUGUDJ> @WRDGMXVW
VXEZRRIHUYROXPHIURPWR
$GMXVWIDGHUEDODQFHYDOXH
7RXFK> @> @> @> @WRDGMXVW
IDGHUEDODQFHYDOXH
Â> @)URQWVSHDNHUfader range: 0 to 20.
Â> @5HDUVSHDNHUfader range: 0 to 20.
Â> @/HIWVSHDNHUEDODQFHUDQJH 0 to 20.
Â> @
5LJKWVSHDNHUEDODQFHUDQJH0 to 20.
Note:
7KHSDUDPHWHUVRIWKH(4PRGHVKDV
EHHQSUHVHWDQG\RXFDQQRWFKDQJHWKHP
EHVLGHVµ8VHU¶
7KH(4PRGHZLOOFKDQJHWRµ8VHU¶
DXWRPDWLFDOO\ZKHQ\RXDGMXVWWKH
IUHTXHQF\YDOXHLQDOOPRGHVEHVLGHV
µ8VHU¶
7KHYDOXHRI6XELVLQGHSHQGHQWRI(4
PRGHDQGFDQEHDGMXVWHGVHSDUDWHO\
9
Basic Operations
Set Date /Time
1. Touch [ ].
2. Touch [ Time ].
The date/time setup menu is displayed.
· Set Date
1. Touch [ Date ].
2. Touch the date information on the screen .
A submenu is displayed.
3. Touch [ ] or [ ] to set year, month and
day.
· Set Clock Mode
1. Touch [Clock Mode].
2. Touch [12H] or [24H] to switch to time
mode.
· Set Time
1. Touch [ Time ].
2. Touch the time on the screen, a submenu
is displayed.
3. Touch [ ] or [ ] to set hour and
minute.
10
Radio Mode
Select Radio as Playing Source
Open the Source Menu and then touch
[Radio].
Select One Radio Band
Press the [BAND] button on remote control
or touch the [ ] icon on the user interface
to select one radio band from FM1, FM2,
FM3, AM1 and AM2.
Tune
Auto Tuning
Press the [ ] / [ ] button on the remote
control briey or hold [ ] / [ ] icon on
the user interface for more than 1 second to
seek a higher / lower frequency.
To stop searching, repeat the operation
above or press other buttons having radio
functions.
Note:
When a station is received, searching stops
and the station is played.
Manual Tuning
Method 1:
During manual tuning, the frequency will be
changed in steps.
Press the [ ] / [ ] button on remote
control or touch the [ ] / [ ] icon on the
user interface to tune in a higher / lower
station.
Method 2:
1. Touch the numeric keypad icon [ ].
Numeric keyboard is displayed, touch
number to input frequency.
2. Touch [ ] to delete the input number
step by step.
3. Touch [ OK ] to enter.
Tuner TFT Display
7
1
5
6
8
2
9
34
10
11
14 15 161312
7RXFKWRYLHZWKH6285&(0(18DQG
VHOHFWDQHZSOD\EDFNVRXUFH
2. Distant signal broadcasting indicator
3. Current radio band indicator
4. Clock
5. Broadcaster information stored at the
preset
6. Touch to view more on-screen buttons
7. Touch to seek backward
8. Scan preset stations
9. Touch to seek forward
10. Touch to change between AM/FM bands
11. Current radio information
12. RDS setting options
13. Current band preset radio stations
14. Touch to change between Local and
Distance
15. Enter frequency directly
16. Touch for quick access to Equalizer
level settings
11
Radio Mode
Preset Station
The unit has 5 bands, such as FM1, FM2,
FM3, AM1, AM2, and each band can store 6
stations; hence the unit can store 30 stations
in total.
Intro/Scan
Press the [ ] icon to intro. Each stored
station will play for 5 seconds automatically.
Hold down the [ ] icon to scan. Only
stations with sufficient signal strength will
be detected and stored in the memory. After
scaning, P1 will play automatically.
Manual Store
1. Tune to a station.
2. Touch [ ] to display the 2nd menu.
3. Touch [ ].
4. Touch one of the channels P1 to P6 to
save the selected band.
Tune to a Preset Station
1. Touch [Radio].
2. Select a band (if needed).
3. Touch one of the preset channels (P1 to
P6) on the screen.
Local Seeking
Touch the [ ] icon and choose the Radio
Local or Distance.
When the [ ] icon turns bright, only
stations with sufcient signal strength will be
detected.
EQ Selection
Press the [ ] icon and enter the EQ setup.
RDS Basics
RDS transmits data to the radio which
displays information such as station
identication, song artist, and song title.
RDS service availability varies with areas.
Please understand if RDS service is not
available in you area, the following service
is not available.
Adjust RDS Settings
1. In Radio menu, touch [ ].
The option menu is displayed.
2. Touch on the selected option to change
the setting.
>5'6@To turn on or off “5'6” function.
>$)@To turn on or off “AF” function.
>(21@
To turn on or off “(21” function.
>7$@To turn on or off “TA” function.
>&7@To turn on or off “&7” function.
[PTY]: To show PTY list.
RDS ( Radio Data System )
7KHXQLWSURYLGHVEDVLFIXQFWLRQVRI5'6
5'6VHUYLFHDYDLODELOLW\YDULHVZLWKDUHDV
3OHDVHXQGHUVWDQGLI5'6VHUYLFHLVQRW
DYDLODEOHLQ\RXDUHDWKHIROORZLQJVHUYLFH
LVQRWDYDLODEOH
12
AF Function
$OWHUQDWLYH)UHTXHQFLHV/LVWVDUHXVHG
IRUWKHVDPHSURJUDPVHUYLFHDQGXVHG
LQFRQMXQFWLRQZLWKWKH3,FRGH3URJUDP
,GHQWLILFDWLRQFRGHWRDVVLVWDXWRPDWLFWXQLQJ
8VLQJWKLVLQIRUPDWLRQDUDGLRFDQ
DXWRPDWLFDOO\VHDUFKRXWDQRWKHUVWDWLRQWKDW
LVSOD\LQJWKHVDPHPDWHULDO7KLVLVXVHIXO
ZKHQWKHVWDWLRQ\RXDUHOLVWHQLQJWRLVIDGLQJ
RXW
Note:
During auto switching radio frequency,
some interference could be heard.
Turning off AF function can settle this
problem.
EON
( Enhanced Other Networks )
When EON data is received, the EON
indicator lights and the TA and AF functions
are enhanced.
TA: Traffic information can be received
from the current station or stations in other
network.
AF: The frequency list of preset RDS stations
is updated by EON data. EON enables the
radio to make full use of RDS information.
It constantly updates the AF list of preset
stations, including the one that it is currently
tuned into. If you preset a station around the
area of your home, you will later be able to
receive the same station at an alternative
frequency, or any other station serving
the same program. EON also keeps track
of locally available TP stations for quick
reception.
TA Function
7KH7$7UDIILF$QQRXQFHPHQWIODJIXQFWLRQ
OHWVWKHXQLWUHFHLYHWUDIILFDQQRXQFHPHQWV
DXWRPDWLFDOO\QRPDWWHUZKDWPHGLDVRXUFH
LVSOD\LQJEDFN7KH7$IXQFWLRQFDQEH
DFWLYDWHGE\D737UDIILF3URJUDPVWDWLRQ
EURDGFDVWLQJWUDIILFLQIRUPDWLRQ
:KHQ7$LVDFWLYDWHGDQGDWUDIILF
DQQRXQFHPHQWLVUHFHLYHGWKHFXUUHQW
SOD\LQJVRXUFHZLOOEHRYHUULGGHQE\WKH
WUDIILFDQQRXQFHPHQWLIWKHFXUUHQWUDGLR
EDQGLV)0LQGLFDWLQJWKDWWKHXQLWLVZDLWLQJ
IRUWUDIILFDQQRXQFHPHQWV
7KHXQLWUHWXUQVWRWKHRULJLQDOVRXUFHDIWHU
WKHWUDIILFDQQRXQFHPHQWKDVEHHQUHFHLYHG
7RDFWLYDWH7$IXQFWLRQWRXFKWKH>7$@EXWWRQ
RQWKHXVHULQWHUIDFH
7RFDQFHOWKLVIXQFWLRQGRWKHRSHUDWLRQDERYH
DJDLQ
CT (Clock Time)
Some stations broadcast the time and date
within the encoded RDS signal. The clock time
is automatically adjusted when ‘CT’ is set to
‘ON’.
PTY Function
PTY is the abbreviation for Program Type
which is a code defining the type of program
being broadcast (e.g. News or Rock).
Then PTY options will display on the screen.
To view more PTY options, touch the scroll bar
and arrows on the screen.
When one PTY option is touched (e.g.
News), auto search for next available PTY
by increasing tuning frequency until the PTY
of the next station matches the current. If no
matched PTY has been found, the unit will
return to the original radio frequency.
Radio Mode
13
Playback Mode
Load a Disc
You can play video, audio or images stored
on the following discs:
DVD Video, DVD-R, DVD-RW
VCD
Audio CD, CD-R, CD-RW
Note:
Ensure that the disc contains playable
content.
Eject a Disc
Press the [ ] button on the front panel
or remote control to eject the disc. When
the disc is ejected, the unit switches to the
previous source.
Touch Screen Controls
The touch key areas for DVD playback are
outlined below:
B
C
A
A: Return to the main menu
B: Play the video and display playback
information
C: Display onscreen control menu
D: Time display
Controlling Playback
To access the on-screen controls, touch the
screen anywhere except for the upper left
corner, and touch again to cancel display.
Touch [ ] to view all function icons.
Connect a USB Device
1. Open the USB door.
2. Insert the USB device into the USB slot.
Play starts automatically.
Remove a USB Device
1. Select another source in the main menu.
2. Remove the USB device.
Insert/Remove a SD Card
Insert
1. Open SD card cover.
2. Insert the SD card into the SD card slot,
the unitl will read the les automatically.
Remove
1. Select another source in the main menu.
2. Press the card unit you hear a click sound.
3. Remove the SD card.
Note:
1. Not garantee the unit can compatible with
all the USB/SD devices;
2. Front USB can support charging (1A) for
partial Android mobile;
3. To use the Rear USB, please come to
Main Interface for access .
14
Playback Mode
Play/Pause
1. Once a disc, USB is inserted, play starts
automatically.
For DVD movie, if a menu appears, press
[ ] to start play.
2. To pause, touch [ ].
To resume play, touch [ ].
Previous/Next
Touch [ ] / [ ] icon on the screen to skip
to previous / next track / chapter.
Search for a Folder
For Video Files
1. Touch [ ] to display all available video
folders.
2. Touch a folder,then touch the desired le.
3. Touch the le again to start play.
For Audio Files
1. Touch [ ] to display all available audio
folders.
2. Touch a folder,then touch the desired le.
3. Touch the le again to start play.
For Picture Files
1. Touch [ ] to display all available picture
folders
2. Touch a folder,then touch the desired le.
3. Touch the le again to start play.
Repeat
For DVD/VCD movie disc:
1.
Touch bottom half of the screen to display
menu on the screen, if necessary.
2. Touch [ ] to display the 2nd menu.
3. Touch [ ] repeatedly to select:
DVD
[ ] Repeat chapter: Play the current
chapter repeatedly.
[ ] Repeat title: Play all chapters in the
title repeatedly.
[ ] Repeat all: Play all in the disc
repeatedly.
Repeat off: Cancel repeat play.
VCD
[ 1] Repeat single: Play the current
single repeatedly.
[ ] Repeat all: Play all in the disc
repeatedly.
Repeat off: Cancel repeat play.
(QT%&/29/#ſNGU
1. Touch anywhere except the upper left
corner to display menu on the screen, if
necessary.
2. Touch [ ] repeatedly:
[ 1] Repeat single: Play the current
single repeatedly.
[ ] Repeat all: Play all in the disc
repeatedly.
[ ] Repeat folder: Play all in the current
folder.
[ ] Repeat off: Cancel repeat play.
Repeat A-B
You can repeat a specic of video le (repeat
A-B).
1. Touch the screen to display control menu,
if necessary.
2. Touch [ ] to display the 2nd menu, if
necessary.
3. Touch [ A-B ] repeatedly to mark:
Repeat A-: the start of the section to
repeat.
Repeat A-B: the end of the section to
repeat.
The selected section plays repeatedly.
15
Playback Mode
4. To exit A-B repeat mode, touch A-B
repeatedly, [Repeat A-B off] is displayed.
5JWHƀG4CPFQO2NC[
You can play audio tracks/files in random
order.
1. Touch the screen to display control menu,
if necessary.
2. Touch [ ] to display the 2nd menu, if
necessary.
3. Touch [ ] on the screen repeatedly to
turn random play on or off.
Select Audio Mode
When you play VCDs, you can select an
audio mode (R/L/Stereo).
1. During play, touch bottom half of the
screen to display menu on the screen, if
necessary.
2. Touch [ ] to display the 2nd menu.
Touch [ ] repeatedly until the audio
mode is selected.
Select Subtitle Language
For DVD or Divx discs that contain two or
more subtitle languages.
1. During play, touch the screen to display
menu on the screen, if necessary.
2. Touch [ ] to display the 2nd menu.
3. Touch [ ] repeatedly to select a
language.
The selected language is displayed.
Change Viewing Angle
Some DVDs contain alternate scenes,such
as scenes recorded from different camera
angles.
For these DVD disc, you can select from the
available alternate scenes.
Press [ Angle ] repeatedly on the remote
control.
The viewing angle is changed.
Video Setup
Touch [ ] to access video setup mode,
touch [ ] or [ ] to set the desired effect.
You may set the brightness, contrast,
saturationand hue of the video output from
0 to 20.
Playback Information
7RXFKWKHVFUHHQZKHQSOD\LQJEDFN'9'
DQG9&'GLVFVDQGWKHSOD\EDFNLQIRUPDWLRQ
ZLOOEHGLVSOD\HGRQWKHWRSDUHDRIWKH7)7
For DVD
'LVFW\SH
'9'7LWOHLQIRUPDWLRQ³´LQGLFDWHVWKDW
WKLV'9'KDVWLWOHVDQGWKHWLWOHSOD\LQJ
EDFNQRZLVWKHILUVWWLWOH
'9'&KDSWHULQIRUPDWLRQ³´LQGLFDWHV
WKDWFXUUHQWWLWOHKDVFKDSWHUVDQG
WKHFKDSWHUSOD\LQJEDFNQRZLVWKHILIWK
FKDSWHU
Time display
'9'77/&+3
For VCD
'LVFW\SH
9&'7UDFNLQIRUPDWLRQ³´LQGLFDWHV
WKDWWKLV9&'KDVWUDFNVDQGWKHWUDFN
SOD\LQJEDFNQRZLVWKHILUVWWLWOH
Time display
9&'
Elapsed Time
(ODSVHGWLPHRIWKHFXUUHQWWUDFN
7RWDOWLPHRIWKHFXUUHQWWUDFN
00:01:20 00:30:17
16
Playback Mode
Direct Track Entry
To select a track directly, touch the [ ]
icon on screen control to display the direct
entry menu. Enter the desired track using the
on-screen number pad. Press [ OK ] to the
selected track.
Rotate Pictures
1. When you view pictures, touch the
screen to display menu on the screen, if
necessary.
2. Touch [ ] to display the 2nd menu.
3. Touch [ ] repeatedly to rotate the
picture.
Zoom
You can zoom in pictures for a close view.
1. When you view pictures, touch the
screen to display menu on the screen, if
necessary.
2. Touch [ ] to display the 2nd menu.
3. Touch [ ] repeatedly to zoom in or out
the picture.
17
You can make or receive phone calls with
Bluetooth-enabled phones through the
unit. You can also listen to music from a
Bluetooth-enabled device.
Pair the Bluetooth-enabled Devices
To connect your Bluetooth device to the
unit, you need to pair the device to the unit.
Pairing needs only to be done once. You can
pair up to ve devices. <RXDOVRFDQVHDUFK
IRU%OXHWRRWKGHYLFHVE\PRELOHSKRQH
1. Turn on the Bluetooth function on the
device.
2. Touch [ +] to search for Bluetooth device
with the device.
3. Select the Bluetooth device ID in the
pairing list.
4. Touch [ Link ].
5. Enter default password “1234”.
Note:
The operational range between this unit
and a Bluetooth device is approximately 5
meters .
Before you connect a Bluetooth device
to this unit, familiarize yourself with the
Bluetooth capabilities of the device.
Compatibility with all Bluetooth devices is
not guaranteed.
Any obstacle between this unit and
a Bluetooth device can reduce the
operational range.
Keep this unit away from any other
electronic device that may cause
interference.
Bluetooth Mode
Disconnect Bluetooth Device
To disconnect one device, touch [ ] .
Note:
The device will also be disconnected
when the device is moved beyond the
operational range.
If you want to reconnect the device to the
unit, place it within the operational range.
Ć ,I\RXGRQRWZDQWWRUHFRQQHFWWKHGHYLFH
WRWKHXQLWDXWRPDWLFDOO\WRXFK> @WKHQ
VHW>$XWR&RQQHFW@WR>2II@
)RUGHWDLOVVHHWKH³$GMXVW%OXHWRRWK
6HWWLQJV´VHFWLRQ
Make a Call
1. Select Bluetooth function in the home
menu.
2. Pair the phone with the unit.
3. Search for phone number from the
following list:
[ ]: Phone Book
[ ]: Call Log
[Missed calls]
[Received calls]
[Dialed calls]
Or touch the number pad directly.
Answer an Incoming Call
By default, all incoming calls are received
automaticaly.
1. If there is an incoming call, ³,QFRPLQJ´ZLOO
DSSHDURQWKHVFUHHQ.
18
Bluetooth Mode
2. You may touch the screen to select [ Hang
up ] or [ Answer ].
Speak into the Bluetooth microphone.
[ ]: Touch to mute the microphone
audio from the unit.
Touch the icon again to restore the
microphone audio from the unit.
[ ]: Touch to access the direct dial
screen.
[ ]: Touch to transfer a call back to the
mobile phone.
Note:You can select to receive calls
manually by setting [Auto Answer] to [ Off ]
status.
Adjust Bluetooth Settings
1. In Bluetooth menu,touch [ ].
The option menu is displayed.
2. Touch on the selected option to change
the setting.
[Bluetooth]: To turn on or off “Bluetooth”
function.
[Auto Connect]: To turn on or off “Auto
connect” function.
[Auto Answer]: To turn on or off “Auto
answer” function.
[Pair Password]: To set paring code.
[Phone Book]: To synchronize phone
book, touch [ Download ] on the sub-menu
popped out.
Phonebook sync may take several minutes
to load on initial setup.
Music Mode
A2DP
$'3LVVKRUWIRU$GYDQFHG$XGLR
'LVWULEXWLRQ3URILOH7KHPRELOHSKRQHV
VXSSRUWLQJWKLVIXQFWLRQFDQWUDQVPLWVWHUHR
DXGLRZKHUHDVWKHRQHVQRWVXSSRUWLQJWKLV
IXQFWLRQFDQWUDQVPLWPRQRDXGLRRQO\
AVRCP
$95&3LVVKRUWIRU$XGLR9LGHR5HPRWH
&RQWURO3URILOH7KHPRELOHSKRQHV
VXSSRUWLQJWKLVIXQFWLRQFDQFRQWUROWKH
SOD\EDFNRID%OXHWRRWKDXGLRSOD\HU
7RPDNHDFDOOLQPXVLFSOD\LQJPRGHSUHVV
WKHQXPEHUNH\VRQWKHPRELOHSKRQHDQG
WKHPXVLFSOD\HUZLOOVWRS³&DOOLQJ´ZLOOEH
GLVSOD\HGRQWKH7)7DQGRQFHWKHFDOOLV
UHFHLYHGWKHFDOOHUDXGLRZLOOEHWUDQVIHUUHGWR
WKHXQLW:KHQWKHFDOOHQGVWKHVFUHHQZLOO
GLVSOD\WKHPXVLFSOD\LQJPHQX
,IWKHUHLVDQLQFRPLQJSKRQHFDOOWKHPXVLF
SOD\HUZLOOVWRSDQGWKHVFUHHQZLOOGLVSOD\
³,QFRPLQJ&DOO´:KHQWKHFDOOHQGVWKH
VFUHHQGLVSOD\WKHPXVLFSOD\LQJPHQX
19
Display System
1. Touch the upper left corner to display the main menu.
2. Touch [ Settings ].
The settings menu is displayed.
3. Touch the upper left corner of the screen to exit.
Adjust General Settings
1. Touch [ General ], if necessary.
2. Touch to select a setting.
3. Touch on the option to display/select an option.
General settings Options Description
5DGLRUHJLRQ 6HOHFWRQHWKDWPDWFKHV\RXUORFDWLRQ86$$6,$-$3$1(8523(/:2,57(8523()0
$8675$/,$/$7,1$0(5,&$
5DGLRUDQJH 6HOHFW'LVWDQFHRU/RFDOi
%ODFNRXW
2II 7XUQRIIWKH%ODFNRXW
V $IWHUVZLOO%ODFNRXWVOHHS
V $IWHUVZLOO%ODFNRXWVOHHS
'LPPHUPRGH 7RXFKWKH>'LPPHUPRGH@WKHUHPRGHWRVHOHFW1LJKW'DUN1RUPDO%ULJKW
%HHS
2Q 7XUQRQWKHEHHSVRXQG(DFKWLPH\RXSUHVVDEXWWRQ
WKHXQLWEHHVV
2II
&DOLEUDWLRQ 7RXFK6WDUWRFDOLEUDWHWKHWRXFKVFUHHQ
.H\FRORU
5HG
<RXFDQVHOHFWWKHFRORURIWKHNH\
*UHHQ
*36SDWKVHWXS 7RXFKWRHQWHU*36SDWKVHWXS
Calibration
:hen the touch operation is not sensitive or valid, you should
calibrate the touch screen using the calibration setting function.
Adjust the response positions of the touch panel as followings:
1. Press the [ Calibration ] option on the setup menu to enter.
2. Touch [ Start ] to enter.
3. Press and hold the center of [ +] for 2 seconds, the [ +] will
move automatically.
4. Aim at center of [ +], follow the path as shown of the ¿gure, after
steps from 1 to 5, the system will exit calibrating automatically.
Adjust Video Settings
1. Touch [Video].
2. Touch an option repeatedly to select.
Video settings Options Description
Parking On / Off Enable video / disable video.
:hen in Park ³On´mode, the screen will display ³:AR1I1*´ [if you play the video disc]. The
above warning screen will prevent the driver from watching images.
Settings
Table of contents
Other Nakamichi Car Receiver manuals
Nakamichi
Nakamichi NA2750 User manual
Nakamichi
Nakamichi NA101 User manual
Nakamichi
Nakamichi NA 1550 User manual
Nakamichi
Nakamichi NA200R User manual
Nakamichi
Nakamichi NA88 User manual
Nakamichi
Nakamichi NA100R User manual
Nakamichi
Nakamichi NQ711B User manual
Nakamichi
Nakamichi NA87 User manual
Nakamichi
Nakamichi NA788 User manual
Nakamichi
Nakamichi NA 1550 User manual
Nakamichi
Nakamichi NA350iBTR User manual
Nakamichi
Nakamichi NA6810 User manual
Nakamichi
Nakamichi NA87 User manual
Nakamichi
Nakamichi NA200R User manual
Nakamichi
Nakamichi NA 1550 User manual
Nakamichi
Nakamichi NA350iBTR User manual
Nakamichi
Nakamichi CD 300 User manual
Nakamichi
Nakamichi NA98 User manual
Nakamichi
Nakamichi NA788 User manual
Nakamichi
Nakamichi NA101 User manual
