Nakamichi NS6-Q2 User manual

2-WAY COMPONENT SPEAKER
NS6-Q2
User Manual
www.nakamichicaraudio.com

PRODUCT INFORMATION
WHAT’S IN THE BOX
INSTALLATION
Check and identify the contents of your package:
Tweeter
20
102
30
42
4
89
800Hz～20KHz
ASV 25mm
-
Woofer
75
140
1530
75
4
88dB±3dB
50Hz～8KHz
KSV 35mm
20
Specifications
RMS.Power(W)
Mounting Diameter(mm)
Net Mass(g)
Mounting Depth(mm)
Sensitivity@1w/1m(dB)
Frequency Range
Nominal lmpedance(Ω
）
Voice Coil
Magnet Mass(Oz)
6. Network (x2);
7. 2.5mm “L” Type Wrench (x1);
8. 3.0mm “L” Type Wrench (x1);
9. Mounting Screw M3x10mm (tweeter) (x6);
10. Mounting Screw M4x30mm (woofer、network) (x16);
1. Installation Manual (x2);
2. Woofer (x2);
3. Woofer’s Grille Net + Frame (x2);
4. Tweeter (x2);
5. Tweeter’s Back Cover (x2);
Fig.1
Fig.2 Fig.3 Fig.4
Y ou c an mo u nt t h e woo fer s on t h e f r on t /r ear do or of yo ur car .
Option 1: Mount the woofer on door (front or rear)
★
★
★
M ake s ur e that nothi n g obs tru cts arou nd the moun ti ng l ocati on of th e door.
A hol e for m ounti ng m ay al ready be cut out of the i nn er panel of th e door( fron t or rear) . I n th i s care, y ou need to modi fy th e board on l y .
E ns ure th at the s peaker term i nal s , frame or magn et do n ot i nter fere wi th any i n ner parts , s uch as the wi ndow) , etc. A l so en sure
that th e s peaker gri l l e does not touch any i nn er fi tti n gs, s uch as th e wi ndow cranks , door h andl es , arm r es ts etc.
1. Turn of f t he car ign it ion key.
★If the power i s on, the cl i ck noi se generated by the connecti on may damage the s peakers.
2. Cu t ou t t he mount in g template fr om t he packing box.
3. P aste t h e template on th e locati on se le ct ed f or m ou n ti ng t he spe aker .
4. Mar k th e cu t-of f hole an d th e 4 bol t h oles. (F ig.1)
5. Cu t ou t t h e m ar k ed ar e a an d dr i ll t he bo lt h ol es . ( Fi g.2)
6. Remove th e gr il le n et. (Fi g.3)
7. Co n nec t th e wo of er s to t h e n et wor k or car au di o.
(See ’How to complete the wir i ng.’)
8. Mou nt on t he speaker as sh own bel ow. (F ig.4)
9. P r ess an d i nser t t h e edges of th e gr i ll e n e t.
★T he s peaker gri l l e can be mou nted wi th out the gri l l e net, i f y ou l i ke.

HOW TO COMPLETE THE WIRING.
★Consult the diagram below. Be sure to connect corresponding terminals, i.e. ''+'' to ''+'' and ''-'' to ''-''. Connection
with reversed polarity will degrade the quality of production.
★Connect the provided speaker cord to the speaker terminal while holding the lower portion of the speaker terminal.
Connect the woofers and the tweeters to the 2-way crossover network first, then connect the network
to your amplifier or car audio directly.
You can also mount the speakers into the surface of the rear tray.
Follow the steps in section “Option 1: Mount on door” to mount the speakers into the rear tray.
Option 2: Mount the woofer on rear tray
Follow steps mentioned in “Mount the woofer” section to mount tweeter.
Find a proper location to mount the tweeter. Mount the tweeter onto the car with the supplied screws.
Mount Mid-range and Tweeter
Option 1 Option 2
★Find a proper location to mount the networks.
★Mount the networks onto the car with the supplied screws.
MOUNT THE NETWORK
Option 2
Option 1
Amplifier
Woofer
Tweeter

IMPORTANT
Read and understand all instructions before you use the apparatus. If damage is caused by failure to follow instructions,
the warranty does not apply.
Use only the supplied mounting hardware for a safe and secure installation.
Do not continuously use the speaker system beyond the peak power handling capacity.
Keep credit cards, watches, recorded tapes etc. with magnetic coding away from the speaker system to prevent damage
caused by the magnets in the speakers.
Clean the apparatus with soft, damp cloth. Never use substances such as alcohol, chemicals or household cleaners on
the apparatus.
DIMENSIONS (UNIT:MM)
Woofer
Φ140mm
Φ166mm
Φ171mm
Φ4mmx4
74.5mm
Tweeter
Φ58mm
Φ58mm
Φ42mm
Φ6mm
30mm
35mm
★Design and specifications are subject to change without notice.
Network
110mm
170mm
45mm