Nakamichi NS6-Q3 User manual

3-WAY COMPONENT SPEAKER
NS6-Q3
User Manual
www.nakamichicaraudio.com

PRODUCT INFORMATION
WHAT’S IN THE BOX
INSTALLATION
Specifications
RMS.Power(W)
Mid-Range TweeterWoofer
75 30 20
Mounting Diameter(mm)
140 74
Net Mass(g)
1541 247 102
Mounting Depth(mm)
75 37 30
42
Sensitivity@1w/1m(dB)
Frequency Range
Nominal lmpedance(Ω）
Voice Coil
4
88dB±3dB
50Hz～8KHz
KSV 35mm
4
85
100Hz～20KHz
KSV 25mm
4
89
800Hz～20KHz
ASV 25mm
Magnet Mass(Oz)
20 6.5 -
8. MID-Range’s 3M Sticker 91x41.5mmx1.5T (x2);
9. MID-Range’s 3M Sticker 91x41.5mmx4.5T (x2);
10. Tweeter (x2);
11. Tweeter’s Back Cover (x2);
12. Tweeter’s Label (x2);
13. Tweeter’s 3M Sticker 33.5x10.5mmx0.5T (x2);
14. Tweeter’s 3M Sticker 54x25mmx1.5T (x2);
1. Installation Manual (x2);
2. Woofer (x2);
3. Woofer’s Grille Net + Frame (x2);
4. MID-Range (x2);
5. MID-Range’s Grille Net+Frame (x2);
6. MID-Range’s Back Cover (x2);
7. MID-Range’s Label (x2);
Check and identify the contents of your package:
15. Network (x2);
16. 2.5mm “L” Type Wrench (x1);
17. 3.0mm “L” Type Wrench (x1);
18. Mounting Screw M3x10mm (tweeter) (x6);
19. Mounting Screw M4x30mm(x24);
20. “8” Type Mounting Bracket
Fig.1
Fig.2 Fig.3 Fig.4
Y ou c an mou n t t he wo of er s on t h e f r o nt /r ear do or o f you r car .
Option 1: Mount the woofer on door (front or rear)
★
★
★
M ake s ure th at nothi ng obs tructs arou nd the mou nti n g l ocati on of the door.
A hol e for moun ti ng m ay al ready be cu t ou t of the i nner panel of the door( front or rear) . In thi s care, y ou need to m odi fy the board onl y .
E n su re th at th e s peaker ter mi nal s , frame or m agnet do n ot i nterfere wi th an y i nner parts , such as th e wi ndow) , etc. A l s o ens ure
th at the s peaker gri l l e does not tou ch an y i nner fi tti ngs , su ch as the wi ndow cr anks , door handl es , arm res ts etc.
1. Turn of f t he car i gn ition key.
★If the power i s on, the cl i ck noi s e generated by the connecti on may damage the s peakers .
2. Cu t out the mou n ti ng template fr om t he packing box.
3. P aste t h e template on the l ocat ion se le ct ed f or m ou n ti ng th e speak er .
4. Mar k th e cu t-of f hole and t he 4 bol t h oles. (Fig.1)
5. Cu t ou t t he mar k ed ar e a an d dr i ll t h e b ol t h ol es. (F i g.2)
6. Remove th e gr il le n et. (Fig.3)
7. Co n nec t th e woof er s to t he n et wo r k or c ar au di o.
(See ’How to complete the wir i ng.’)
8. Mou nt on t he speaker as sh own below. (F ig.4)
9. P r ess an d in se r t th e edge s of t he gr i ll e n et .
★T he s peaker gri l l e can be m ounted wi thout the gri l l e n et, i f y ou l i ke.

Follow steps mentioned in “Mount the woofer” section to mount mid-range、tweeter and network.
Find a proper location to mount them. Mount them onto the car with the supplied screws.
Mount Mid-range 、Tweeter And Network
You can also mount the speakers into the surface of the rear tray.
Follow the steps in section “Option 1: Mount on door” to mount the speakers into the rear tray.
Option 2: Mount the woofer on rear tray
Mid-range and Tweeter Option 1
Mid-range and Tweeter Option 3
Mid-range and Tweeter Option 2
Network Option
Option 2
Option 1
IMPORTANT
HOW TO COMPLETE THE WIRING.
Read and understand all instructions before you use the apparatus. If damage is caused by failure to follow instructions,
the warranty does not apply.
Use only the supplied mounting hardware for a safe and secure installation.
Do not continuously use the speaker system beyond the peak power handling capacity.
Keep credit cards, watches, recorded tapes etc. with magnetic coding away from the speaker system to prevent damage
caused by the magnets in the speakers.
Clean the apparatus with soft, damp cloth. Never use substances such as alcohol, chemicals or household cleaners on
the apparatus.
★Consult the diagram below. Be sure to connect corresponding terminals, i.e. ''+'' to ''+'' and ''-'' to ''-''. Connection
with reversed polarity will degrade the quality of production.
★Connect the provided speaker cord to the speaker terminal while holding the lower portion of the speaker terminal.
Connect the woofers and the tweeters to the 2-way crossover network first, then connect the network
to your amplifier or car audio directly.
Amplifier
Woofer
MID-Range
Tweeter

DIMENSIONS (UNIT:MM)
Woofer
Φ140mm
Φ166mm
Φ171mm
Φ4mmx4
74.5mm
Tweeter
Φ58mm
Φ58mm
Φ42mm
Φ6mm
30mm
35mm
Φ97mm
Φ74mm
Φ93mm
Φ4mmx4
37mm
Mid-range
★Design and specifications are subject to
change without notice.
Network
170mm
45mm
110mm
Connecting Sheet
Tweeter Level Seletabel.
Short J1, You Can Hear
More Bass Sound From
Mid-speaker.
L1
L2
L3
L4
C1
C3
P1
C5
R2
R3
-3dB
0dB
+3dB
C2
C4
R1
J1
J2
J3
J4
IN + WF+ GND MID+ TW+
IN+ IN- WF+ WF- MID+ MID- TW+ TW-