Napoleon Prestige PRO 500 User manual

Harvest Grove Outdoor Kitchen
Napoleon BBQ Instruction Manual

2
02-2018
This kit measures 51.5 x 60 x 28 in
Materials Included:
• 12 x 8 x 4 in Quarry Stone – 57 pieces
• 8 x 8 x 4 in Quarry Stone – 3 pieces
• 4 x 12 x 6 in Quarry Stone – 6 pieces
• 4 x 8 x 6.625 in Quarry Stone – 2 pieces
• 4 x 8 x 6.125 in Quarry Stone – 7 pieces
• 4 x 8 x 2.625 in Quarry Stone – 2 pieces
• 4 x 8 x 2.125 in Quarry Stone – 6 pieces
• 4 x 8 x 4 in Quarry Stone – 9 pieces
• 4-piece Ebony Accent Band
• 3-Piece Ebony Countertop
• Prestige PRO™ 500 Napolean Grill
• Stainless Steel Vent Box
• Tank and Drawer Frame
• Double Door Tank Holder and Dual Drawers
• Concrete Screws with Drill & Driver Bits
• Plastic Shims
• Tube of Landscape Glue
• Gloves
• Instruction Guide
• Napoleon Manual
12 x 8 x 4 8 x 8 x 4 4 x 12 x 6
4-Piece Ebony
Accent Band
Materials
Base Preparation
If installing your Napoleon BBQ Grill on an
unstructured base, please ensure to follow
these steps:
• Excavate area approx. 9 inches below grade.
• Excavate approx. 6 inches larger than your
actual kit dimensions to ensure a stable base.
• Fill with 0.75 inch down limestone and
compact firmly.
• Level out 0.5 inch of sand and install kit as per
the instruction guide.
If you are installing on a solid base such as
an existing patio, base prep is not necessary.
Please proceed to the first step.
These instructions may not refer to all base
conditions. As this kit is incredibly heavy, base
prep will greatly depend on existing ground
conditions and may require alternate techniques.
Note: This manual was updated in January 2018.
Check www.barkmanconcrete.com/resources
for any manual updates.
3-Piece Ebony
CountertopOther Items Needed:
• Drill
• Caulking gun
• Measuring tape/ruler
Prestige PRO™ 500
Napolean Grill
Stainless Steel Vent Box Tank and Drawer Frame Double Door Tank Holder
and Dual Drawers
4 x 8 x 2.1254 x 8 x 6.125 4 x 8 x 2.625
4 x 8 x 6.625
4 x 8 x 4
Note: The Napoleon BBQ units are available in
propane and natural gas. Contact a gas fitter
prior to installing your natural gas BBQ unit.

302-2018
Note: Certain steps indicate the use of
landscape glue. This is for added stability
but it’s optional and at the discretion of the
user.
Step 1
Lay down the stone pattern shown along
with the tank and drawer frame. Glue the
cut ends of the blocks to the tank and
drawer frame for this and future layers.
Check that stones are level at every step.
There should be 20 inches between the
stone and top of the frame. Use included
shims for adjustments.
Use (7) 12 x 8 x 4 blocks
Use (1) 8 x 8 x 4 blocks
Use (2) 4 x 8 x 4 blocks
Use (2) 4 x 8 x 6.125 blocks
Use (1) Tank and Drawer Frame
8 x 12
4 x 8 x 6.125
Instructions
Step 2
Lay out the second layer as shown along
with the Vent Box. Check that stones are
level. There should be 16 inches between
the stone and top of the frame. Use
included shims for adjustments. Glue this
layer down to the first layer. Glue the cut
ends of the blocks to the tank and drawer
frame.
Use (8) 12 x 8 x 4 blocks
Use (1) 4 x 8 x 4 blocks
Use (2) 4 x 8 x 2.125 blocks
Use (1) Stainless Steel Vent Box
8 x 8
4 x 8
8 x 12
4 x 8 x 2.125
4 x 8

4
02-2018
Step 3
Repeat the pattern from step 1. Check that
stones are level. There should be 12 inches
between the stone and top of the frame. Use
included shims for adjustments. Glue the cut
ends of the blocks to the tank and drawer
frame.
Use (7) 12 x 8 x 4 blocks
Use (1) 8 x 8 x 4 blocks
Use (2) 4 x 8 x 4 blocks
Use (2) 4 x 8 x 6.125 blocks
Step 4
Lay out the fourth layer as shown in the dia-
gram. Check that stones are level. There should
be 8 inches between the stone and top of the
frame. Use included shims for adjustments.
Glue the cut ends of the blocks to the tank and
drawer frames.
Use (9) 12 x 8 x 4 blocks
Use (2) 4 x 8 x 2.125 blocks
Step 5
Repeat patterns from Steps 3 & 4. Make sure
this layer is flush with the top of the frame.
Glue the cut ends of the blocks to the tank
and drawer frames.
If installing with the Side Burner, do so on
the right-hand side of the Napoleon BBQ
Grill.
Use (16) 12 x 8 x 4 blocks
Use (1) 8 x 8 x 4 blocks
Use (2) 4 x 8 x 4 blocks
Use (2) 4 x 8 x 6.125 blocks
Use (2) 4 x 8 x 2.125 blocks
Remove this block if installing
Side Burner beside Napoleon
BBQ Grill

502-2018
Step 6
Lay down the 4-piece Accent Band as shown.
Make sure all 4 pieces are level. Glue this down
to the Tank and Drawer Frame and Quarry
Stone below.
Use (1) 4-piece Accent Band
Step 7
Lay out the second layer as shown in the
diagram.
Use (6) 12 x 8 x 4 blocks
Use (3) 4 x 12 x 6 blocks
Use (2) 4 x 8 x 2.625 blocks
Step 8
Lay out the second layer as shown in the
diagram.
Use (4) 12 x 8 x 4 blocks
Use (3) 4 x 12 x 6 blocks
Use (2) 4 x 8 x 6.625 blocks
Use (2) 4 x 8 x 4 blocks
4 x 8 x 2.625
4 x 8 x 6.625

6
02-2018
Step 9
Lay down the 3-piece Ebony Countertop
as shown. Make sure all 3 pieces are level.
Glue this down to the quarry stone below.
Use (1) 3-piece Ebony Countertop
Step 10
Insert the Double Door Tank Holder and Dual
Drawers into the Tank and Drawer Frame.
Use the included shims to ensure it fits snug
and remains square. Remove the tank holder
and drawers from the sliders by pressing on
the black tabs.
Use (1) Double Door Tank Holder
Step 11
Pre-drill holes into the Tank and Drawer
Frame through openings in the Double Door
Tank Holder and Dual Drawers with the
drill bit provided. Fasten in place with the
provided concrete screws (do not overtight-
en). Reinsert the drawers and tank holders
thereaer.
Front edge flush
with Quarry Stone
1.5 inch overhang at back

702-2018
Step 12
Place the Prestige PRO™ 500 Napolean Grill
into the space provided.
Note: Refer to the manual included with
Prestige PRO™ 500 Napolean Grill for proper
use and installation.

Napolean BBQ Grill
Bar with Fridge Bar Counter
Pizza Oven
Prep Station with
Waste Receptacle
Side Burner
End Units
(Le and Right)
Corner Unit
STEINBACH OFFICE
152 Brandt Street, Steinbach, MB R5G 0R2
T 204 326 3445 or 1 800 461 2278
F 204 326 5915
[e-mail]
WINNIPEG OFFICE
901 Gateway Road, Winnipeg, MB R2K 3L1
T 204 667 3310 or 1 800 342 2879
F 204 663 4854
[e-mail]
CALGARY OFFICE
813 McCool Street, Box 1136,
Crossfield, AB T0M 0S0
T 403 946 4630 F 403 946 4631
[e-mail]
VANCOUVER OFFICE
2104-290 Newport Drive,
Port Moody, BC V3H 5N2
T 778 689 7670 or 1 800 461 2278
F 604 949 0321
[e-mail]
SASKATOON DISTRIBUTION CENTER
3550 Idylwyld Drive North, Saskatoon, SK
T 1 306 549 7544
KELOWNA DISTRIBUTION CENTER
1904 Old Okanagan Highway, Westbank, BC
T 1 204 346 9490
SURREY DISTRIBUTION CENTER
8167 132nd Street, Surrey, BC
T 1 204 346 9490
barkman concrete limited
BarkmanConcrete.com
STEINBACH OFFICE
152 Brandt Street, Steinbach, MB R5G 0R2
T 204 326 3445 or 1 800 461 2278
F 204 326 5915
[e-mail]
WINNIPEG OFFICE
901 Gateway Road, Winnipeg, MB R2K 3L1
T 204 667 3310 or 1 800 342 2879
F 204 663 4854
[e-mail]
CALGARY OFFICE
813 McCool Street, Box 1136,
Crossfield, AB T0M 0S0
T 403 946 4630 F 403 946 4631
[e-mail]
VANCOUVER OFFICE
2104-290 Newport Drive,
Port Moody, BC V3H 5N2
T 778 689 7670 or 1 800 461 2278
F 604 949 0321
Vanc[email protected]om
SASKATOON DISTRIBUTION CENTER
3550 Idylwyld Drive North, Saskatoon, SK
T 1 306 549 7544
KELOWNA DISTRIBUTION CENTER
1904 Old Okanagan Highway, Westbank, BC
T 1 204 346 9490
SURREY DISTRIBUTION CENTER
8167 132nd Street, Surrey, BC
T 1 204 346 9490
Harvest Grove
Kitchen Kits
Compact Pizza Oven