Nasco Healthcare Alex Axel User manual

No tablet? No problem!
You can use any wifi-enabled device to setup your simulator your
laptop, tablet, or even smartphone as long as you can choose between
different wifi networks.
Plug in the battery charger to a wall outlet and the manikin,
then power on your simulator.
Open your wifi network settings and connect your laptop (or
device) to the simulator’s wifi network.
Open Google Chrome or Firefox and visit the setup.pcs.ai
website and follow the onscreen instructions.
As simple as 1-2-3:
DC power port and
switch are on the left
side of the torso.
This page presents simulator-specific
content while connected to its wifi.
~ Network
name
Wifi
password



APPLY LABEL HERE
GETTING
STARTED
WITH YOUR SIMULATOR
Visit help.pcs.ai or nascohealthcare.com for more detailed
instructions and further assistance.
For more information, email us at ale[email protected]
or call 1-833-NASCOHC (627-2642). We are happy to help you!

... the tablet by pressing
the power button for a few
seconds. You may want to
connect the USB charger of
the tablet to start charging
its battery.
TURN ON

… to begin the setup process. Tap
Google Chrome icon to start. The
displayed pages will guide you
through connecting your simulator
to the internet and activating it.
USE THE
TABLET

UNPACK YOUR
SIMULATOR

... and the accessories: the simulator’s external power
supply, power cord, the included wifi tablet and its
USB charger (as illustrated on previous page).
Google
Chrome