National Tree Company Dual Color Pre-Lit Memory Shape Tree with... User manual

FOR INDOOR USE ONLY. Retain carton for storage purposes.
SAVE THESE INSTRUCTIONS
Assembly Instructions
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
• Do not use seasonal products outdoors unless
marked suitable for indoor and outdoor use. When
products are used in outdoor applications, connect
the product to a Ground Fault Circuit Interrupter
(GFCI) outlet. If one is not provided, contact a
qualified electrician for proper installation.
• This seasonal use product is not intended for
permanent installation or use.
• hen decorating trees, use miniature light bulb
strings or LED light strings only. “C” size bulbs
are not recommended.
• Do not mount or place near gas or electric heaters,
fireplaces, candles or other similar sources of heat.
• Do not secure the wiring of the product with
staples or nails, or place on sharp hooks or nails.
• Unplug the product when leaving the house, when
retiring for the night, or if left unattended.
•CAUTION: This is an electrical product – not a toy!
To avoid risk of fire, burns, personal injury and
electric shock, it should not be played with or
placed where small children can reach it.
• Do not let lamps rest on the supply cord or any wire.
• Do not use this product for other than its intended
use.
• Do not hang ornaments or other objects from cord,
wire or light string.
• Do not close doors or windows on the product or
extension cords as this may damage the wire
insulation.
• Never operate this product if the power cord or
plug is damaged.
• Use only manufacturer specified replacement bulbs.
• ead and follow all instructions that are on the
product or provided with the product.
USE AND CARE INSTRUCTIONS
• When storing the product, carefully remove the
product from wherever it is placed, including trees,
branches, or bushes, to avoid any undue strain or
stress on the product conductors, connections, and
wires.
• When not in use, store neatly in a cool, dry location
protected from sunlight.
Dual Color®Pre-Lit Me ory Shape®Tree
with PowerConnect™
RETAIN FOR YOUR RECORDS:
Tree Style No. UPC Code
Store Where Purchased
Date Purchased Price
LIMITED ARRANTY FOR ARTIFICIAL CHRISTMAS TREES
New product registration can
only be co pleted online at
nationaltree.co /custo er-service.ht l
Please read this warranty thoroughly and familiarize yourself with
its restrictions and requirements.
National Tree Company warrants its trees against manufacturer-
only defects for a period of five (5) years from the date of
purchase indicated on your sales receipt.
Manufactured defective parts will be repaired or replaced.
The lights on Pre-Lit Trees are warranted for a period of two (2)
years from date of purchase; three (3) years for low voltage
LED trees (see below).
This Warranty does not apply to trees that are used as display
trees in the store. This tree is for indoor use only. Outdoor use of
this tree voids the warranty.
PRE-LIT TREES LIMITED ARRANTY
National Tree Company warrants the light sets on its Pre-Lit trees
against manufacturer-only defects in material or
workmanship for a period of two (2) years from date of
purchase; three (3) years for low voltage LED trees. Culpability
of Company is limited to replacement of defective light set only.
To have the arranty placed into effect, completed online
registration of product is required with inclusion of sales
receipt noting purchase date and place. New product registration
can only be completed online at www.nationaltree.com.
Shipping Costs under PRE-LIT ARRANTY TERMS: Please
note the following terms regarding shipping of product for
warranty service:
1) National Tree Company will pay the cost of shipping (to our
facility and back to customer), under warranty terms, during the
first season of use. Receipt dated prior to December 25 of
purchase year constitutes first season of use. Please note that it
is the responsibility of the customer to obtain a box of the smallest
possible size and shape to securely contain the part being shipped.
2) After the second season of use, the customer will be
responsible for cost of delivery to our facility. National Tree
Company will pay the return cost delivery of parts repaired due
to manufacturing defect. Customer will be responsible for return
shipping cost of any parts repaired due to misuse or neglect.
3) All shipping costs to and from our facility for warranty service
after the third season of use will be the responsibility of the
customer.
REQUIREMENTS FOR ARRANTY SERVICE:
Customers are required to contact National Tree Company
for AUTHORIZATION OF RETURN prior to shipping product
for warranty service.
To receive authorization of return, email us at service@
nationaltree.com or call 1-888-494-PA T (7278). Information
required will include: product item number, UPC bar code number,
name of store where purchased, a detailed description of the
problem, and your address and phone number.
At the discretion of National Tree Company, you may either
receive a replacement part or be instructed as to which part(s)
to ship prepaid to National Tree for our inspection and
determination and/or possible repair. eplacement or repair as
provided by this limited warranty is our exclusive remedy to the
consumer and does not place National Tree Company liable for
any incidental or consequential damages.
IMPORTANT NOTES:
emoving factory attached functioning or non-functioning light
strings from any section of your pre-lit tree will void the
warranty.
Please retain the product carton for storage purposes and/or for
use in the event of warranty service for product shipment.
Keep product away from heat and moisture. This limited warranty
does not cover damage resulting from accident, misuse, abuse,
negligence, or normal wear. In these instances, parts can be
purchased at a reasonable fee plus shipping charges.
CAUTION: IMPORTANT SAFETY INSTRUCTIONS
SAVE YOUR SALES RECEIPT. It will be
needed when requesting warranty service.

Assembly Instructions
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
• Do not use seasonal products outdoors unless
marked suitable for indoor and outdoor use. When
products are used in outdoor applications, connect
the product to a Ground Fault Circuit Interrupter
(GFCI) outlet. If one is not provided, contact a
qualified electrician for proper installation.
• This seasonal use product is not intended for
permanent installation or use.
• When decorating trees, use miniature light bulb
strings or LED light strings only. “C” size bulbs
are not recommended.
• Do not mount or place near gas or electric heaters,
fireplaces, candles or other similar sources of heat.
• Do not secure the wiring of the product with
staples or nails, or place on sharp hooks or nails.
• Unplug the product when leaving the house, when
retiring for the night, or if left unattended.
•CAUTION: This is an electrical product – not a toy!
To avoid risk of fire, burns, personal injury and
electric shock, it should not be played with or
placed where small children can reach it.
• Do not let lamps rest on the supply cord or any wire.
• Do not use this product for other than its intended
use.
• Do not hang ornaments or other objects from cord,
wire or light string.
• Do not close doors or windows on the product or
extension cords as this may damage the wire
insulation.
• Never operate this product if the power cord or
plug is damaged.
• Use only manufacturer specified replacement bulbs.
• Read and follow all instructions that are on the
product or provided with the product.
U E AND CARE IN TRUCTION
• When storing the product, carefully remove the
product from wherever it is placed, including trees,
branches, or bushes, to avoid any undue strain or
stress on the product conductors, connections, and
wires.
• When not in use, store neatly in a cool, dry location
protected from sunlight.
FOR INDOOR USE ONLY
Retain carton for storage purposes
SAVE THESE INSTRUCTIONS
Pre-Lit Memory Shape®Tree with PowerConnect
and Revo ving Tree Stand*
RETAIN FOR YOUR RECORD :
Tree Style No. UPC Code
Store Where Purchased
Date Purchased Price
LIMITED WARRANTY FOR ARTIFICIAL CHRI TMA TREE
New product registration can
on y be comp eted on ine at
nationa tree.com/customer-service.htm
Please read this warranty thoroughly and familiarize yourself with
its restrictions and requirements.
National Tree Company warrants its trees against manufacturer-
only defects for a period of five (5) years from the date of
purchase indicated on your sales receipt.
Manufactured defective parts will be repaired or replaced.
The lights on Pre-Lit Trees are warranted for a period of two (2)
years from date of purchase; three (3) years for low voltage
LED trees (see below).
This Warranty does not apply to trees that are used as display
trees in the store. This tree is for indoor use only. utdoor use of
this tree voids the warranty.
PRE-LIT TREE LIMITED WARRANTY
National Tree Company warrants the light sets on its Pre-Lit trees
against manufacturer-only defects in material or
workmanship for a period of two (2) years from date of
purchase; three (3) years for low voltage LED trees. Culpability
of Company is limited to replacement of defective light set only.
To have the Warranty placed into effect, completed online
registration of product is required with inclusion of sales
receipt noting purchase date and place. New product registration
can only be completed online at www.nationaltree.com.
hipping Costs under PRE-LIT WARRANTY TERM : Please
note the following terms regarding shipping of product for
warranty service:
1) National Tree Company will pay the cost of shipping (to our
facility and back to customer), under warranty terms, during the
first season of use. Receipt dated prior to December 25 of
purchase year constitutes first season of use. Please note that it
is the responsibility of the customer to obtain a box of the smallest
possible size and shape to securely contain the part being shipped.
2) After the second season of use, the customer will be
responsible for cost of delivery to our facility. National Tree
Company will pay the return cost delivery of parts repaired due
to manufacturing defect. Customer will be responsible for return
shipping cost of any parts repaired due to misuse or neglect.
3) All shipping costs to and from our facility for warranty service
after the third season of use will be the responsibility of the
customer.
REQUIREMENT FOR WARRANTY ERVICE:
Customers are required to contact National Tree Company
for AUTHORIZATION OF RETURN prior to shipping product
for warranty service.
To receive authorization of return, email us at service@
nationaltree.com or call 1-888-494-PART (7278). Information
required will include: product item number, UPC bar code number,
name of store where purchased, a detailed description of the
problem, and your address and phone number.
At the discretion of National Tree Company, you may either
receive a replacement part or be instructed as to which part(s)
to ship prepaid to National Tree for our inspection and
determination and/or possible repair. Replacement or repair as
provided by this limited warranty is our exclusive remedy to the
consumer and does not place National Tree Company liable for
any incidental or consequential damages.
IMPORTANT NOTE :
Removing factory attached functioning or non-functioning light
strings from any section of your pre-lit tree will void the
warranty.
Please retain the product carton for storage purposes and/or for
use in the event of warranty service for product shipment.
Keep product away from heat and moisture. This limited warranty
does not cover damage resulting from accident, misuse, abuse,
negligence, or normal wear. In these instances, parts can be
purchased at a reasonable fee plus shipping charges.
CAUTION: IMPORTANT SAFETY INSTRUCTIONS
AVE YOUR ALE RECEIPT. It will be
needed when requesting warranty service.
*Tree weight n t t exceed 100 lbs. (45 kgs) including dec rati ns.

Each carton contains one top section, one bottom section
(larger trees include one or more middle sections) and
two tree stands.
1. Revolving tree stand is already attached to bottom
section center pole. Stand comes with legs folded in
downward position; four locking pins are packed
separately. Before use, each leg must be pulled up
from lower position and locked into place.
Bring a leg completely up and insert a locking pin into
the hole of the leg (Figure 1). Repeat this procedure for
remaining three legs.
Note that a folding metal tree stand is included to use
in place of the revolving stand if desired. Assembly
instructions are located below.
2. With tree in desired position for display, rest your foot
on the tree stand and pull the section sleeve up and off.
3. Insert the top tree section into the lower tree assembly
and remove the section sleeve (Figure 2).
Trees with Middle ection(s)
Some of the taller trees will include one or more middle
sections. Each section will be numbered in ascending
order. The tree bottom section (which inserts into tree
stand) will be number 1. The next section as you build
up, will be number 2. Section 3will follow until
assembly is completed by inserting tree top section.
Insert the middle section(s) as necessary removing
the sleeve one section at a time (Figure 3). Remove
sleeve from the top section and insert it into the
section below.
4. Branches should fall into place following removal of
sleeve. If any branches remain upright, gently lower
them into proper position.
5. Connect the electrical cord from the tree center pole
to the receptacle of the revolving stand. Plug the
electrical cord from the stand into a power supply.
IMPORTANT NOTE:
It is important that the
electrical cord from the
center pole remains
above the thumb
screws of the revolv-
ing stand. Be sure to
bundle the excess
cord and attach it to a
bottom branch using
a tie wrap or similar
device (Figure 4).
Fig. 3
Fig. 1
Fig. 2
BULB REPLACEMENT IN TRUCTION
1. Unplug light string from power source.
2. Pull up on the Base Lock™ unlatching the bulb from the
bulb socket. Gently pull the bulb straight out (Figure 5).
3. Before inserting the new bulb into socket,
make sure that the two wires on either side
of the bulb base are straight up and flush
with the base (diagram at right).
4. Carefully insert new bulb into socket and
push down Base Lock until it snaps into place (Figure 6).
Fig. 5
Fig. 6
FU E REPLACEMENT IN TRUCTION
1. Unplug light string from power source.
2. Fuses are located in light string plug. Slide the fuse
access cover away from cord side (in direction of
arrow, Figure 7) exposing fuses.
3. Remove fuses from compartment and examine.
Replace burnt out fuse with new one.
4. Close fuse compartment by sliding access cover
back in towards cord side of plug (Figure 8).
Fig. 7
Fig. 8
TORAGE
Remove the tree stand. Bring all branches to their original upright/compressed position
and secure each section in its protective sleeve. All tree parts can be placed in original
carton and should be stored in a cool, dry area.
During tree assembly or disassembly, DO NOT DI -
CONNECT any of the factory connected light strings
that are located on the center pole or within the tree.
Using the optional Folding Tree tand
Remove the revolving stand by loosening the wing nuts.
pen the folding tree stand and insert the eye bolt. Insert
bottom section pole into tree stand making sure it is fully
seated. Tighten eye bolt until section is held securely.
Plug the electrical cord from the tree into a power supply.
TIE WRAP
BRANCH ROD
Fig. 4
Nationa Tree Company 2 Commerce Drive, Cranford, New Jersey 07016 USA www.nationa tree.com
Made in China

Each carton contains one top section, one bottom
section (larger trees include one or more middle
sections) and tree stand.
1. Unfold the tree stand and insert the eye bolt. emove
packing material from ends of poles. Put bottom
section pole into tree stand making sure it is seated
properly (Figure 1). Tighten eye bolt until bottom is
held securely.
2. With tree in desired position for display, rest your foot
on the tree stand and pull the section sleeve up and
off.
3. Insert the top tree section into the lower tree
assembly and remove the section sleeve (Figure 2).
Trees with Middle Section(s)
Some of the taller trees will include one or more
middle sections. Each section will be numbered in
ascending order. The tree bottom section (which
inserts into tree stand) will be number 1. The next
section as you build up, will be number 2. Section 3
will follow until assembly is completed by inserting
tree top section.
Insert the middle section(s) as necessary removing
the sleeve one section at a time (Figure 3). emove
sleeve from the top section and insert it into the
section below.
4. Branches should fall into place following removal of
sleeve. If any branches remain upright, gently lower
them into proper position.
5. Plug the electrical cord from the tree into a power
supply.
During tree assembly or disassembly, DO NOT DIS-
CONNECT any of the factory connected light strings
that are located on the center pole or within the tree.
DUAL COLOR®TREE
OPERATING INSTRUCTIONS
The foot switch operates the functions of the lights.
There are nine functions, each one is activated with
the press of the foot switch. Functions occur in the
following order:
Steady warm white; Steady multicolor; Fading warm
white; Fading multicolor; Warm white fading to
multicolor; Flashing warm white; Flashing multicolor;
Flashing warm white to multicolor (slow); Flashing
warm white to multicolor (fast)
Light functions always follow this sequence.
Fig. 3
Fig. 1
BULB REPLACEMENT INSTRUCTIONS
STORAGE
emove the tree stand. Bring all branches to their original upright/compressed position and secure each section in its protective
sleeve. All tree parts can be placed in original carton and should be stored in a cool, dry area.
National Tree Co pany 2 Commerce Drive, Cranford, New Jersey 07016 USA www.nationaltree.co
1. Unplug light string from power source.
2. Pull up on the Base Lock™ unlatching the bulb from the bulb socket. Gently pull the
bulb straight out.
3. Carefully insert new bulb into socket (bulb is keyed and only goes in one way) and
push down Base Lock until it snaps into place.
Fig. 2
Made in China