NATIVE UNION MM04i User manual

MM04i Bluetooth®Wireless
Handset+Base
English
Français
Deutsch
Español
Italiano
中國語
日本語
Instruction Manual
Manuel d'utilisation
Bedienungsanleitung
Manual de instrucciones
Manuale di istruzioni
使用手冊
取扱説明書

WELCOME
Thank you for buying a MM04i speaker-handset, you will love this new experience of comfortable
and radiation safe talk.
MM04i is a unique product, combining :
- A Bluetooth®Wireless handset
- A Bluetooth®Wireless conference call device
For the most up-to-date information, be sure to check our Web site at www.nativeunion.com
WHAT YOU GET IN THIS PACKAGE
1. One MM04i Bluetooth®Wireless handset
2. One MM04i base
3. One multi-country AC adaptor with
3 exchangeable power supply plugs for
Europe, UK, North America and Asia.
1
1
2
34 5 6
7
- A Bluetooth®Wireless high quality speaker
- An iPhone charging and syncing dock
4. One Micro USB / USB Cable
5. One audio jack 3.5mm to 3.5mm cable
6. One instruction Manual
7. 2 universal dock adaptors for iPhone®3GS
and iPhone®4
MM04i Bluetooth
®
Wireless
Handset+Base

LOCATION OF CONTROLS
Earpiece +
Stereo Speaker
Volume (+) Buttom
Power Button ( )
3.5mm
line-in port MM04i
Handset
Micro USB Pin
Retractable
Iphone®Dock
3 Colors
Multi-Functions LED
(LED1)
Front Back
Charging LED
Microphone
Stereo Speaker
LED3
3.5mm line-out port
Charging Pins
Volume (-) Buttom
MFB (O) Buttom
Conference Call
Microphone
Red &
Blue LED (LED2)
AC Charging Pin Silicon Pads
Charging
Connectors
Back rest
silicon stud
Bottom Top
2

How to use the MM04i Bluetooth®Wireless technology
speaker-handset :
PLEASE READ THESE INSTRUCTION CAREFULLY before using your new speaker-handset.
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to meet strict quality and safety standards.
There are, however, some installation and operation precautions which you should be particularly
aware of :
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat
8. Only use attachments/accessories specified by the manufacturer.
You must first locate and identify the buttons : please check the “Location of controls” section to help
you.
3

MM04i have 3 different mode :
- Private call mode / led3 will be ligh in RED color :
Use it as a handset. One speaker only is activated (in handset volume set up) and the Private
Call Microphone is activated
- Conference Call mode / led3 will be ligh in GREEN color :
Put it on the table for conference calling : the two stereo speaker are activated, with the dedicated
Conference Call Microphone (up to four people)
- Speaker mode / led3 will be ligh in BLUE color :
Both microphones are muted but the two stereo speakers are activate
Your MM04i have been engineered with a professional acoustic company to play a very pure and
balanced sound. It is not because the space is limited that it doesn’t sound great !
Your MM04i will automatically pause the music if you are listening to a song and there is an incoming
call. Music playback will then resume when the call will be disconnected
4

5
STEP1
CHARGE YOUR MM04i
a. Connect the round pin of the AC adaptor cable provided
to the base of the MM04i
b. Plug the AC adaptor into a power outlet.
c. Finally, place the handset in the charging base to charge
the battery*
The RED charging LED will appear behind the front grill.
* The MM04i comes with a build-in rechargeable battery. It takes
about four hours to fully recharge the battery.
- During charging :
The RED led of the handset will turn on
- When the battery is fully charged :
CONNECTING YOUR MM04i TO YOUR iPHONE®(OR ANY
BLUETOOTH®WIRELESS TECHNOLOGY MOBILE PHONE.)
RED Charging LED

IN CONNECTED STATUS
When your MM04i is low battery, the RED led2
of the handset will light on.
Place it back to the base to charge it.
When your MM04i has enough battery,
the BLUE LED2 of the handset will light on.
IN UNCONNECTED STATUS
When your MM04i is low battery, the RED led2
of the handset will start blinking.
Place it back to the base to charge it.
When your MM04i is enough battery,
the BLUE LED2 of the handset will start blinking.
STEP2
TURN YOUR MM04i ON
To turn on your MM04i, you must press and hold the POWER
( ) button for 3 seconds.
When your MM04i is on, you will hear a sound and the BLUE
led3 at the back of the handset will turn on.
6

7
STEP3
TURN YOUR MM04i OFF
To turn off your MM04i, you must press and hold the POWER
( ) button button for 3 seconds.
When your MM04i is off, you will hear a sound and the BLUE
led at the back of the handset will turn off.
STEP4
PAIRING THE MM04i BLUETOOTH
®
WIRELESS HANDSET
WITH YOUR iPHONE
®
(OR ANY BLUETOOTH
®
WIRELESS
TECHNOLOGY MOBILE PHONE.)
First of all, you must make sure that your mobile phone has
Bluetooth® Wireless capability. If you are not sure whether it
does, please consult the user's instructions.
IMPORTANT : Please note that your MM04i must be power
ON before starting the pairing process.
a) To pair your MM04i Bluetooth®Wireless handset
with your mobile phone, you must press and hold the MFB
(O) button for 5 seconds, until you hear a sound and you
see the RED and BLUE led2 flashing alternatively.
Your MM04i Bluetooth®Wireless handset is now
ready to be paired.
5 sec.

b) Make sure the Bluetooth®Wireless function is activated on
your mobile phone, and instruct your mobile phone to search
for new Bluetooth® devices. (check the user's instructions
of your mobile phone if you need more information about
this)
c) Place your MM04i Bluetooth® Wireless handset
within 1 meter away from your mobile phone.
d) Your mobile phone should search for all Bluetooth® devices
and the name “MM04i” should appear on the
Bluetooth® device list.
e) Select “MM04i” and enter “0000” if a password is required.
The MM04i will make a sound and the blue led2
will light on indicating the pairing process is now completed
and the phone connected.
ON
Bluetooth
Devices
ON
Bluetooth
Devices
MM04i Connected
within 1 meter
MM04 not Connected
MM04i
8

9
Once your MM04i will be connected and if it has sufficient
battery, the led2 will light in blue.
If the MM04i is connected but has a low battery level, the led2
will light in red.
Those led are a visual indication, to tell you if the MM04i is
connected or not to your mobile phone, and to indicate you
the battery level.
You can use now your MM04i !
Note : Some phones will connect to the MM04i automatically.
If your phone prompts you to confirm whether you want to
connect to the MM04i, accept the connection request.
If your phone does not connect to the MM04i then use your
phone's Bluetooth menu to initiate a connection manually.
ATTENTION : The Bluetooth® Wireless technology signal reception works up to a
10m range (open area). If your mobile phone move away further this limit, the
Bluetooth® connection will stop and the MM04i will be automatically disconnected.
The Blue led2 will blink to indicate this disconnection.
ATTENTION : If your MM04i is not connected and has sufficient battery, the led2 will start blinking in
blue.
If the MM04i is not connected and has a low battery level, the led2 will start blinking in red.
Sufficient
Battery
Low
Battery

CHARGING YOUR IPHONE®
To charge your iPhone®with your MM04i, you need to “Push”
the Iphone®dock to open (located on the base of the MM04i)
Place your Iphone in this dedicated Iphone®dock
Your iPhone®will be charged in both power on and power off
modes until it reaches the FULL CHARGE mode. To recharge
your iPhone®, the AC adapter must be connected to the base
of MM04i.
MAKING A CALL
To make a call with your MM04i simply do as you normally do
it, with your mobile phone, except that when the call connects,
you will now speak and listen through the MM04i.
USE YOUR MM04i WITH YOUR iPHONE®(OR ANY OTHER BLUETOOTH®
WIRELESS TECHNOLOGY MOBILE PHONE)
10

11
ANSWERING AN INCOMING CALL IN PRIVATE MODE :
a) When the handset in on the base :
- Simply pick up the handset from the base
You may, should you prefer, also answer the call directly
on your mobile phone as usual.
However, once you have done this, you will still be connected
on your MM04i (led1 will light in RED color)
b) When the handset in not on the base :
- Short press the MFB button
You may, should you prefer, also answer the call directly
on your mobile phone as usual
However, once you have done this, you will still be connected
on your MM04i (led1 will light in RED color)
ANSWERING AN INCOMING CALL IN CONFERENCE CALL
MODE :
When the handset in on the base :
- Short press the MFB button (led1 will light in GREEN color)
led1 will light in RED
led1 will light in GREEN

DISCONNECTING A CALL
To hang-up a call on your MM04i, simply press the MFB (O)
button once or place the handset back on the base.
INFORMATION : During your conversation with MM04i you
can switch between the Private Call mode and the Conference
Call mode by simply pressing the POWER ( ) button, at the
back of the handset.
In Private call mode, the led1 will light in RED color,
whereas it will light in GREEN color in
Conference Call mode.
INFORMATION : MM04i enables a Bluetooth® connection to stay paired even if the MM04i handset
or the mobile phone is switched off and on again. This feature allows instant Bluetooth® re-connection
when either one of the Bluetooth device is switched off and on again.
Please also note that MM04i can memorize up to 4 devices. MM04i will then auto-reconnect to the
last connected device. If last connected device is not available, it will try to connect to the next device
on the list.
12
or
Private Call Mode
Conference Call Mode

13
OTHER FUNCTIONS OF THE MM04i BLUETOOTH®WIRELESS
SPEAKER-HANDSET
SYNCING YOUR IPHONE®
Your MM04i can also synchronize your iPhone®with your computer :
a) Simply plug the Micro-USB / USB cable provided between the Micro-USB port of the
MM04i base and the USB port of your computer.
c) The synchronization process between your computer and your iPhone®will automatically start
whenever you Iphone®will be docked.
REJECTING INCOMING CALLS
To reject a call on your MM04i, press and hold for 2 seconds the MFB (O) button
VOLUME CONTROL
During a call, to adjust the volume on your MM04i, simply locate the volume control + and – buttons
and press “+” to increase the volume or “–” to decrease it.
REDIAL LAST NUMBER
To redial the last number called on your MM04i, just double press the MFB (O) button.

END ACTIVE CALL AND ACCEPT WAITING CALL
During a call, to end the active call and accept the waiting incoming call on your MM04i, short press
the MFB (O) button.
HOLD ACTIVE CALL AND ACCEPT WAITING CALL
During a call, to hold your actual active call and accept the waiting incoming call on your MM04i,
double press the MFB (O) button. Please do the same if you want to switch again between the two
calls.
VOICE ACTIVATED DIALING
Your MM04i also support “voice activated” dialing with certain models of mobile phones. Before you
use this function, you need to set up “voice-tags” on your mobile phone. To find out how to do this,
please refer to the instruction manual of your mobile phone.
To make a voice activated call, press MFB (O) button for 2 seconds and then release
When you will hear a “bip” you must tell the name you wish to call.
If your mobile phone has trouble recognizing the voice tag, please record again the voice-tag
corresponding threw the MM04i.
MUTE
For MUTE toggle, double press the POWER ( ) button to mute or un-mute microphone.
14

15
CHOOSE YOUR MM04i RINGTONE
You can define how you want your MM04i to ring on incoming calls. You have a choice of 2 ringtones.
f) To enter the ringtone selection mode on you MM04i, press and hold for 2 seconds
Volume + (+) and Volume – (-) buttons together. Your MM04i will then play the first
ringtone repeatedly.
g) To select a ringtone, short press the MFB (O) button and the Volume + (+) button together. Each
press of those combine buttons will play the next ringtone.
h) To adjust the volume of the selected ringtone, short press the Volume + (+) or Volume – (-) button.
i) To confirm the selected ringtone and leave the ringtone selection mode, press and hold for 2
seconds Volume + (+) and Volume – (-) buttons together.
AUTOMATIC RECONNECTION
The MM04i is designed to reconnect to your phone automatically.
If you take your phone out of range of the MM04i for more than 30 seconds (without turning the
MM04i off), and then come back into range the MM04i will search for your phone and reconnect
automatically.
It can take up to 25 seconds for the MM04i to find your phone and reconnect.
The MM04i will only automatically reconnect to the last two connected phones. If your phone is not
one of the last two connected phones then you will have to reconnect to the MM04i using your
phone's Bluetooth menu.
In addition, the MM04i will not reconnect automatically if you manually disconnected your phone from
the MM04i using your phone's Bluetooth menu. In this case you will need to use your phone's
Bluetooth menu to reconnect.

16 By default, some phones (including Blackberry phones) will prompt
you to confirm whether you want to accept the connection from the
MM04i. If your phone keeps prompting you about the connection
to the MM04i, then you should change the setting on your phone
so that it considers the MM04i as a trusted or authorized connection
(please check your phone’s instruction manual)
(On some phones you may need to change an additional security
setting to allow the phone and MM04i to reconnect to each other
automatically every time they come back into range. If your phone
keeps prompting you to accept the connection from the MM04i
every time you bring it back into range with the MM04i, then this
applies to you. Check your phone’s instruction manual for more
details on how to change this setting on your phone.)
Out of range
Automatic
Deconnection
Back into
range
Automatic
Reconnection
PAIRING AN ADDITIONAL DEVICE
You only need to pair your phone with the MM04i once. Once you have paired your phone
with the MM04i they will reconnect to each other in future without you having to repeat the
pairing process. If you need to pair an additional phone, simply:
1.Turn the MM04i off
2.Put the MM04i back into pairing mode by pressing and holding the MFB (O)
button for 5 seconds, until you hear a sound and you see the RED and BLUE led flashing
alternatively. Your MM04i is now ready to be paired.
3.Follow the STEP4 instructions to pair the MM04i with your new device.

17
The MM04i can store pairing information for up to 4 Bluetooth devices. If you pair a fifth device, it will
replace the stored pairing information for the phone that has not connected to the MM04i for the
longest time.
You can connect the MM04i to two Bluetooth devices at the same time. For more information, please
see “Using more than one Bluetooth wireless device at the same time”
INFORMATION : Please note that the MM04i also enables a Bluetooth®connection with any laptop
or desktop (Mac or PC) featured with a Bluetooth®Wireless Technology (supporting HS or HF profile)
to work with Skype, Google Talk or other VOIP services.
To connect your MM04i with your computer, you need to go threw the above pairing process. If you
experience some problem with the sound, such as hearing the sound coming out from the computer
instead of your MM04i, please check that MM04i has been selected on the “Audio Preferences” of
your computer or of your VOIP software.
USING MORE THAN ONE BLUETOOTH DEVICE AT THE SAME TIME (MULTIPOINT)
The MM04i supports Multipoint technology. This means that you can use one the MM04i with two
different mobile phones or Bluetooth devices at the same time: if either phone rings, you can answer
it with the MM04i.
If I have two phones paired and connected, which one will be used ?
When you have two phones connected to the MM04i:
• You can answer calls received on either phone (short press the MFB button)
• If you initiate a call through the MM04i (by using button to either redial the last call or use your
phone's voice dial feature), then the call will happen on whichever phone is currently
designated the primary phone. As explained below, this is determined by a combination of connection
order and active calls.

Which phone is the primary phone?
The primary phone is either the phone that connected to the MM04i most recently or the
phone that had the last active call:
• When your phones connect to the MM04i, the one that connects last becomes
the primary.
• Every time you have an active call through the MM04i (incoming or outgoing),
the phone with the call becomes the primary phone.
• If both phones go out of range and come back into range together then the primary
phone will be whichever one happens to reconnect last out of the two. In this case you
will not be able to tell which phone is the primary until you either initiate a call through
the MM04i or receive a call on one of the phones.
Setting the Primary Phone
You can force the MM04i to change the primary phone by doing any of the following:
• Answer an incoming call : the phone receiving the call will become the primary phone.
• Initiate a call from one of the phone : the phone making the call will become the primary phone.
Multiple Calls in a multipoint connection scenario
The MM04i does not allow you to call from 2 phones simultaneously. If you receive a call
from Bluetooth device 2 while you are already on an ongoing call on Bluetooth device 1,
you will hear a special ringtone in the MM04i :
18

19
• Short press MFB button to end the current call and accept the incoming call.
• Double press MFB to hold the current call and accept the incoming call.
• Or do nothing if you want to ignore the incoming call and continue with the current call.
→ A simple press always end the actual call and accept the incoming call
→ A double press always put the actual call on hold and accept the incoming call
Bluetooth Device 2
Bluetooth Device 1
• Short press = end current call / accept incoming call
• Double press = hold current call / accept incoming call
• Do nothing = ignore incoming call
SPEAKER MODE THROUGH BLUETOOTH
Your MM04i will automatically switch to Speaker mode when it will receive a Music streaming signal
threw through the Bluetooth® wireless technology.
The led3 will automatically light in BLUE color
ATTENTION : High Quality audio stereo can only be streamed through A2DP profile.
A2DP will only be supported for iPhone since version 3.0 of the operating system. If you have an
older version, please upgrade to version 3.0