NATIVE UNION POP BLUETOOTH User manual
English
Français
Deutsch
Español
日本語
ﺔﻴﺑﺮﻌﻟﺍ
한국어
Pусский
Türk
Italiano
POP
BLUETOOTH
中文
Português
1
Instruction Manual
Manuel d’utilisation
Bedienungsanleitung
Manual de instrucciones
Manuale di istruzioni
Manual de instruções
使用手冊
取扱說明書
사용 설명서
Руководство по эксплуатации
Ögretim Kılavuzu
WELCOME
CONTENTS
1. POP Bluetooth basics 2
2. Connect 3
3. Communicate 5
4. Specications 6
5. Safety information 6
IN THE BOX
1. POP Bluetooth Handset
2. Micro-USB Cable
3. Felt Mat
4. Quick start guide
5. Instruction Manual
1
English
B
POWERING UP
It takes 3-4 hours to fully charge the handset
using the micro-USB cable.
TALK TIME
Up to 8 hours
STANDBY
Up to 100 hours
CHARGING
When charging a red LED will appear.
When the handset is fully charged the LED will turn o.
LOW BATTERY
the red LED will ash.
TURNING THE HANDSET ON AND OFF
Press and hold the button for 4 seconds
– a blue LED will ash.
Repeat to turn-o.
POP Bluetooth basics
2
English
When the handset is o; press
and hold the button for 5 seconds
until the red and blue LED’s ash
alternately.
– you are now ready to pair
Activate the Bluetooth setting on
your device – (the device needs to
be within a metre of the handset)
Your device will either automatically
search for available Bluetooth
devices or alternatively manually
instruct your device to search for
Bluetooth devices
Select “POP Bluetooth”
- If asked enter password 0000
The blue LED will ash every 4
seconds – you are now connected
You only need to pair your device
once.
To pair other devices please repeat
the above steps.
You can pair up to 8 devices.
CONNECT
3
1
2
3
4
5
within 1 meter
4 sec.
English
5 sec.
4
BLUETOOTH WIRELESS RANGE
The Bluetooth wireless signal range is up to 10 metres
from your mobile device.
AUTOMATIC RECONNECTION
If your mobile device goes out of range the purple
LED will ash. Once the mobile device is back in range
the handset will automatically reconnect to the last
connected mobile and the blue LED will ash every 4
seconds.
If the mobile device does not automatically reconnect,
use your mobile devices Bluetooth menu to reconnect
manually.
English
MAKING A CALL
Dial the number as usual
ANSWERING/ENDING A CALL
Click the button
VOICE ACTIVATED DIALING
Click the button - you hear the alert beep
- state the name of the person you wish to call*
*not all devices support this function
LAST NUMBER REDIAL
Double click the button
REJECT A CALL
Press and hold the button for 2 seconds
VOLUME CONTROL
Increase and decrease volume using the + and
– volume control buttons during the call
RINGING VOLUME
Increase and decrease ringer volume using + and
– volume control buttons when in standby mode
MUTE
Press the + and - volume buttons together to mute.
Repeat to un-mute
For further help regarding your POP Bluetooth
visit : nativeunion.com/support
COMMUNICATE
2
5
English
Bluetooth specs: V2.1
Radio frequency range: 2.402-2.480GHz
Output Power Class: Class 2
Maximum range
(Open space)
: 10 metres
Supported profiles: HSP, HFP
Type of Battery: Lithium-ion Polymer
Talk Time: up to 8 hours
Standby: up to 100 hours
Audio Output: 10mW RMS
Power supply: DC5V
Operating temperature: 0 to 45C
Please read the instructions carefully.
This product has been designed and manufactured
to meet strict quality and safety standards.
However, please take note of the following important
safety information.
Do not use this apparatus near water. Take care not to
spill liquids on the POP Bluetooth. If your POP Bluetooth
gets wet, unplug it from your mobile and allow it to
dry thoroughly. Please note that damage caused by
liquid is not covered by the warranty.
Only clean with a dry cloth. Do not use any cleaning
solvents or products.
To prevent possible hearing damage, do not listen at high volume
levels for long periods.
6
SPECIFICATIONS
SAFETY INFORMATION
English
FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following 2 condition:
1.this device may not cause harmful interference, and
2.this device must accept any interference received, including interference that
may cause undesired operation. Changes or modications not expressly approved
by the party responsible for compliance could void the user’s authority to operate
the equipment.
IMPORTANT SAFETY WARNINGS
1.FCC regulations state that any change or modication to the equipment, not
expressly approved by the manufacturer or its authorized parties, could void user’s
authority to operate this equipment.
2.To prevent re or electric shock, do not expose the unit to rain or moisture.
3.Never attempt to open the casing. Always refer servicing to a qualied technician.
FCC NOTICE (USA)
As specied in Part 15 of the FCC Rules, this equipment complies within the limits of a
Class B digital device. These restrictions
restrictions provide sucient against radio and TV interference in residential areas.
However, even during normal operation, this device may cause TV or radio
interference. In attempting to eliminate some or all interference, you should try
one or more of the following corrective measures:
1.Increase the distance between the device and the radio and/or TV
2.Try a dierent outlet on various electrical circuits for the device, the radio and/
or TV.
3.Reposition the receiving antenna
Spec. is subject to change without prior notice.
Assembled in China
© Native Union and Native Union Logo are registered trademarks of Design Pool Ltd
All other trademarks and registered trademarks are the property of their respected owners.
Other products and company names mentioned herein may be trademarks of their respective
companies.
Disposal of old electrical and electronic equipment:
Aer the implementation of the European DIrective 2002/96/EU in
the national legal system, the following applies:
Electrical and electronic devices may not be disposed of with domestic
waste. Consumers are obliged by law to return electrical and electronic
devices at the end of their services lives to the public collecting points
set up for this porpuse or point sale. Details to this are dened by the
national law of the respective country. This symbol on the product,
the instruction manual or the package indicates that a product is
subject to these regulations. By recycling, reusing the materials or other
forms of utilizing old devices, you are making and inportant contributions
to protecting our environment.
7
The Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc.
And any use of such marks by Design Pool Limited is under licence.
Bluetooth QDID : B019861
English
nativeunion.com
contact@nativeunion.com
Table of contents
Other NATIVE UNION Handset manuals
