NATIVE UNION MM02T User manual

Web www.nativeunion.com
Email [e-mail]

3
NATIVE UNION
English
Français
Deutsch
Español
日本語
한국어

Túrk
Italiano
“MM02T”
中文
Instruction Manual
Manuel d’utilisation
Bediengungsanleitung
Manual de instrucciones
Manuale di istruzioni
使用手册
取扱説明書
사용 설명서

Kilavuzuna

5
WELCOME
Thank you for buying a MM02T, you will love this new experience of
comfortable and radiation safe talk.
For the most up-to-date information, be sure to check our website :
· www.nativeunion.com
WHAT YOU GET IN THIS PACKAGE
12
4
3
2MM02T Base
33.5mm speacker / microphone splitter cable
4Instruction manual
MM02T handset
1
NATIVE UNION
English
Français
Deutsch
Español
日本語
한국어

Túrk
Italiano
“MM02T”
中文
Instruction Manual
Manuel d’utilisation
Bediengungsanleitung
Manual de instrucciones
Manuale di istruzioni
使用手册
取扱説明書
사용 설명서

Kilavuzuna
1

LOCATION OF CONTROLS
Earpiece
Pick-Up/Hang-Up button
Microphone
2
Tablet slot
Base
Line switch
button
Dual retractable 3.5mm jack Handset 3.5mm port
MM02T
Handset

7
BEFORE YOU USE YOUR NEW HANDSET
PLEASE READ THESE INSTRUCTIONS CAREFULLY
This product was designed and manufactured to meet strict
quality and safety standards. There are, however, some
installation and operation precautions which you should be
particularly aware of:
1. Read these instructions
2. Do no use this apparatus near water
3. Clean only with dry clothing
4. Do not install near any heat sources such as radiators,
heat registers, stoves or other apparatus (including ampliers)
that produce heat
5. Only use attachments/accessories specied by the manufacturer
3

4
HOW TO USE MM02T
Step 1
Plug the 3.5mm jack of the
MM02T handset into the
3.5mm port of the MM02T
base
Step 2
Check if your mobile device
requires any adaptor.
If your mobile phone device
doesn´t require an adaptor
please proceed directly to
step 4
Step 3
Plug the corresponding
adaptor to either one of the
retractable 3.5mm jack at the
back of the MM02T base

9
5
Step 4
Plug the cable jack
end securely into the
corresponding audio port
of your mobile device
(phone/tablet/laptop)
Step 5
Repeat step 2 to step 4 if you
wish to connect the MM02T
to a second mobile device

6
BE CAREFUL
do not force the adaptor/jack into your mobile device, you could damage it.
We can not be held responsible for any damage you will do to your mobile device while trying to
connect your MM02T.
SWITCHING BETWEEN CONNECTED DEVICES
The line switch button is used for switching between the lines of the 2 devices connected to
the MM02T.
BUTTON UP (green ring) - correspond to the retractable 3.5mm jack with the green marking.
BUTTON DOWN - correspond to the other rectractable 3.5mm jack without the green marking.
MAKING A CALL
Once your Native Union MM02T is connected to your mobile devices, you can make a call as
you normally would. Use the line switch button to choose your preferred connection for the call.
Volume is controlled through your mobile device as usual.
ANSWERING AN INCOMING CALL
Calls on either of the connected mobile device could be answered with the MM02T. Most
mobile phone will support the MM02T button function. Just press the center button on the
handle of the handset to answer a call.
If your mobile device doesn’t support the button function, you can then answer the call by
pressing the regular answer button on your mobile device.
DISCONNECTING A CALL
Simply press the center button on the handle of the MM02T to end a call. If your mobile
device doesn’t support the button function, you can then end the call by pressing the regular
disconnect button on your mobile device.
REDIALING LAST NUMBER
Depending on your mobile device brand and model, you may be able to redial the last number
called by simply pressing the center button of the MM02T while the phone is in standby.
VOICE ACTIVATED DIALING
The MM02T also supports “voice activated dialing” with certain brand and model of mobile
devices. Before you can use this function, you need to set up voice tags on your mobile device
(please check your mobile device’s instruction manual for more details).
To make a voice activated call, hold down the center button of the handset until you hear an
alert tone. You must then pronounce clearly the name of the contact you wish to call.
TROUBLESHOOTING
If you are having problems using your Native Union MM02T, please go to
www.nativeunion.com for further help, or consult your local retailer.
ADAPTORS
The Native Union MM02T works with most of the mobile devices available on the market.
However, some of them might require a special adaptor to connect to your MM02T 3.5mm jack.
To check which adaptor your device might need, please go to
www.nativeunion.com/adaptors
LIMITED WARRANTY
If the product appears to be damaged or does not function properly, please follow the advice
in this booklet.
If you can not nd any solution in this booklet, please go to
www.nativeunion.com/support for instructions about how to obtain warranty service.

11
Web www.nativeunion.com
Email [e-mail]
Designed in France by David Turpin
www.nativeunion.com
Spec. is subject to change without prior notice.
Assembled in China
© Native Union and Native Union Logo are registered trademarks of Design Pool Ltd
All other trademarks and registered trademarks are the property of their respected owners.
Other products and company names mentioned herein may be trademarks of their respective companies.
7
FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that
this device does not cause harmful interference.
Do not make changes or modify the device in any way. Changes or modications not expressly
approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
IMPORTANT SAFETY WARNINGS
1. FCC regulations state that any change or modication to the equipment, not expressly
approved by the manufacturer or its authorized parties could void user’s authority to operate
this equipment.
2. To prevent re or electric shock, do not expose the unit to rain or moisture.
3. Never attempt to open the casing. Always refer servicing to a qualied technician.
FCC NOTICE (USA)
As specied in Part 15 of the FCC Rules, this equipment complies within the limits of a Class B
digital device. These restrictions provide sufcient protection against radio and TV interference
in residential areas. However, even during normal operation, this device may cause TV or radio
interference. In attempting to eliminate some or all interference, you should try one or more of
the following corrective measure:
1. Increase the distance between the device and the radio and/or TV
2. Try a different outlet on various electrical circuits for the device, the radio /or TV
3. Reposition the receiving antenna
Disposal of old electrical and electronic equipment:
After the implementation of the European DIrective 2002/96/EU in the national
legal system, the following applies:
Electrical and electronic devices may not be disposed of with domestic waste.
Consumers are obliged by law to return electrical and electronic devices at the end
of their services lives to the public collecting points set up for this purpose or point
of sale. Details to this are dened by the national law of the respective country.
This symbol on the product, the instruction manual or the package indicates that
a product is subject to these regulations. By recycling, reusing the materials or
other forms of utilizing old devices, you are making an important contributions to
protecting our environment.