Nautilus Extreme MXE-200 User manual

1
#LMANN08 Revised: 01-29-2015
Nautilus MXE-200
Operating Manual
EXTREME

2
Nautilus Extreme MXE-200 Operating Manual
TABLE OF CONTENTS
TOPIC PA E #
•Introduction 3
•Technical Specifications 4
•Optional Equipment 5
SECTION 1: Operational Safety
•Electrical Safety 6
•Mechanical Safety 7
SECTION 2: Operation Procedures
•Vacuum Connections 8
•Electrical Supply 9
•Water Supply & Chemicals 10
•Solution Hose & Pump Priming 12
•Vacuum Hose 14
•Foam Downer 15
•Pump-Out System 16
•Shutdown Procedures 17
•Accessory Storage 18
•Troubleshooting 19
•Solution Flow Path 22
•Wiring Diagrams 23
SECTION 3: Maintenance/ Technical
•Maintenance 26
•Drawings & Parts Lists
oPump 34
oPressure Regulator 35
oAuto-Fill 36
oPump-Out Pump 38
oParts Pictures 39
oParts List 50
oHose List 53
•Warranty 54

3
Introduction
Congratulations on your purchase of the Hydro-Force Nautilus Extreme MXE-
200. he Nautilus Extreme MXE-200 is designed to give truck mount-level
performance in a portable machine that combines versatility with ease of
transport. Years of experience, engineering, and planning have gone into the
design and manufacturing of the Nautilus Extreme MXE-200. We take a great
deal of pride in the Nautilus Extreme MXE-200; our goal is no less than your
complete satisfaction.
The Hydro-Force Nautilus Extreme MXE-200 is intended for commercial
use only.
his manual will provide users with the knowledge required to operate the
Nautilus Extreme MXE-200 safely, to understand how to properly operate and
maintain the machine, and to ensure that the equipment operates at its maximum
performance level.
All users must read and understand this manual completely before
operating the machine.
Always maintain this manual in legible condition adjacent to the Nautilus Extreme
MXE-200, or place in a secure location for future reference.
Any questions pertaining to the operating or servicing of this unit should be
directed to your nearest Hydro-Force distributor.
his manual is written specifically for the Nautilus Extreme MXE-200 portable
extractor units manufactured by:
Hydro-Force
4282 South 590 West
Salt Lake City, U 84123
801-268-2673
801-268-3856 FAX
Information in this manual is subject to change without notice and does not
represent a commitment on the part of Hydro-Force or its parent or affiliated
companies.

4
Technical Specifications
Nautilus Extreme MXE-200 High Pressure Extractor
Height: 42-1/4”
Length: 34-3/8”
Width: 23-3/8”
Weight: 119 lbs.
Solution Tank Capacity: 12 gallon
Recovery Tank Capacity: 12 gallon
Solution Pump: Pump-Tec #114 pump with 1.4ampMotor
0-200 psi – 0.89 gpm
Vacuum Motors: Two AMETEK Lamb 8.4” diameter 2-Stage – tangential discharge
Can be operated in series or parallel configuration
Pump-out Pump: Little iant 120VAC 8-20 gpm
(Optional) Maximum psi 11.4 – Maximum pumping height 26 ft.
Power Draw: Cord #1 – 15.32 amp wide open / 9.02 amp full load
Cord #2 – 13.70 amp wide open / 7.40 amp full load
(Add 5.00 amps to Cord #2 for units with optional Pump-Out Pump)
Standard Equipment
Vacuum Connection: 2” Barb or 2”Male Flash Cuff with 2” Male NPT
Vacuum Hose: 25’ X 1-1/2” with 1-1/2” cuff & 2” cuff
2” Female Flash Cuff x 1-1/2” hose adapter
Carpet Wand: 1-1/2” SS Dual Jet S-Bend Wand – AW29
Accessory Mount Hardware: Four 1/4-20 x 5/8” SS Screws and Washers
HP Solution Hose: 25’ x 1/4” with 1/4” male & female quick connects
Pump Priming Hose: 12” x 1/4” with 1/4” male quick connect
Power Cords: 2 – 25’ x 12gauge with male & female plug ends
Electrical: Dual Circuit Indicator
3amp Pump Circuit Breaker
Two Internal Component Cooling Fans
Optional Features:
Auto Fill System with chemical draw:
Metering Tip Kit: 14 different tips for changing chemical dilution rate
Water Supply Hose: 50’ x 3/8” with 1/4” female quick connect &
Female garden hose fitting
Auto Pump-out System:
Pump-out Hose: 50’ x 3/4” with male & female garden hose fittings

5
Additional / Optional Equipment
Wand lide – Delrin AW529D
Wand lide – Teflon AW529T
18” Bottom Velcro Strap for Wand Holder NM5841
Hy-Dry Deluxe Upholstery Tool: AW50D
Flash Xtractor II: AC002
1-1/2” Vacuum Hose: (Sold per foot – No cuffs) AH36
2” cuff for 1-1/2” Vac Hose: AH46
1-1/2” cuff for 1-1/2” Vac Hose: AH42
1-1/2” Hose Connector PVC: AH74
HP Solution Hose 1/4” X 25’ w/M-F Quick Connects AH79D
1/4” Male Quick Connect: AH102B
1/4” Female Quick Connect: AH101B
Pump-out Hose: AH65
Hydro Filter II: AC10
Replacement Screen for Hydro-Filter II: AC10C
Metering Tip Kit: PDE001
12/3 X 25’ Power Cord: AX32
12/3 X 50’ FCI Power Cord: NM4407A
Belt Pack AX108
A
C10
AW50D
NM440 A
AX108
AX32
A
C10C
AC002