NCCO DateCodeGenie X Series User manual

Power Setup Printer Setup
Parts Included
• Device
• Power cord (inside
device)
• Stylus and Holder (inside
device)
• Packing slip
• Quality testing labels
• Quick Start Guide
NC DCG 09 002 (4/21)
1. Connect power cord to back
of the device and to an outlet.
Toggle master power switch to
illuminate green and charge the
touchscreen for 1 hour.
2. Open the case cover to reveal
the printer(s). Gently separate the
two black arms and insert label roll
unrolling from the top with black
lines facing down.
3. Press the blue/black tab to
release the lever. Extend the labels
over the edge of the opening and
close lever to snap in place. Labels
will automatically advance and
cut to calibrate. Repeat for second
printer (if applicable.) Close
case cover.
DateCodeGenie®X Series Quick Start Guide
models X2, X22, X23, and X33
Scan this QR Code
to watch the
setup video

7. Tap to turn on Wi-Fi and turn toggle green.
Tap Wi-Fi and then the network to connect to
from the list. Tap to return to home screen after
connected.
5. Tap Settings to begin device setup.
Tablet Setup
4. Press and hold tablet power button releasing when
DateCodeGenie®displays.
6. Tap Network & Internet to connect to network.
8. For Wi-Fi connection issues, confirm date and time
settings by tapping in upper left corner, then scroll
to System and tap. Tap Date & time and then tap
Automatic date & time Off. Configure Set date, Set
time and Select time zone. Tap Automatic date & time
again and now tap Use network-provided time. Tap
to return to home screen.

13. Tap to display list of paper types and select
the label loaded in each printer. Tap to save
settings. Tap in the upper left corner to
return to app.
12. Tap in left corner of app to open. Scroll
to Settings, tap to open and then tap
Printer Setup.
10. Tap the to display username list and tap to
select (see Packing Slip for login credentials). Type
in the password, if prompted, and tap .
App Setup
9. Tap DateCodeGenie®to launch the app.
11. Tap ALLOW for DateCodeGenie to access
photos, media, and files on device. Tap CONTINUE,
then INSTALL and OPEN when the popup displays a
new app version is available.

NC DCG 09 002 (4/21)
Training Resources
Contact & Support
Go to DateCodeGenie.com to view available videos
For access to all training tools available 24/7, log into your
portal at DateCodeGenie.com and click HELP from the gray
box on your dashboard or go to the Support Tab. See all
Updates, Videos, and more!
Customer Service
800.328.6508
[e-mail]
NCCO is committed to the quality and reliability of its
DateCodeGenie®products. For more info and full details of
the device limited 2-year warranty, log into your portal at
DateCodeGenie.com, locate the Support Tab then Documentation
to download the full DateCodeGenie Limited Warranty.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Technical Support
800.774.0478
dcgsuppor[email protected]