NCR 7350-K140 Manual

Kit Instructions
2-Bag Bagwell Upgrade
7350-K140/K141/K142/K143/K145/K964
Issue C

The product described in this document is a licensed product of NCR Corporation.
NCR is a registered trademark of NCR Corporation. NCR SelfServ™ Checkout is a trademark of NCR Corporation in the United
States and/or other countries. Other product names mentioned in this publication may be trademarks or registered trademarks of
their respective companies and are hereby acknowledged.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks
of HDMI Licensing LLC in the United States and other countries.
Where creation of derivative works, modifications or copies of this NCR copyrighted documentation is permitted under the terms
and conditions of an agreement you have with NCR, NCR's copyright notice must be included.
It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software, and firmware become
available. NCR, therefore, reserves the right to change specifications without prior notice.
All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances,
photographs are of equipment prototypes. Software screen images are representative, and in some cases, may not match a
customer’s installed software exactly. Therefore, before using this document, consult with your NCR representative or NCR office
for information that is applicable and current.
To maintain the quality of our publications, we need your comments on the accuracy, clarity, organization, and value of this book.
Please use the link below to send your comments.
Email: [e-mail]
Copyright © 2011-2019
By NCR Corporation
Global Headquarters
864 Spring St. NW
Atlanta, GA 30308
United States
All Rights Reserved

K140Cover 1-3
Revision Record
Issue Date Remarks
AJan 2011 • First Issue
• 50DR20059
BAug 2011 • Added steps on the removal and installation of
stainless steel lower bumpers if included in the kit.
• Added steps on the removal and installation of the
rear frame support bracket.
• Added steps on the installation of the rear lower
bumper on the Backsplash if included in the kit.
• 50DR22474
CJuly 2019 • Added to IP Kit Repository site with HTML version.
• 50DR36322
DAug 2019 • Updated Kits
• 50DR36505

1-4

7350 2-Bag Bagwell Upgrade
This publication provides procedures for installing a 2-Bag Bagwell to a 7350 NCR
SelfServ™ Checkout.
Kit Contents
Depending on the color variant of the Bagwell, refer to the following sections for
information about kit contents:
•7350-K140 2-Bag Bagging Area (G/11) on the next page.
•7350-K141 2-Bag Bagging Area (Battleship Gray) on page4.
•7350-K142 2-Bag Bagging Area (Dark Red) on page7.
•7350-K143 2-Bag Bagging Area (RAL 9001 Cream) on page9.
•7350-K145 2-Bag Bagging Area (Walmart Blue) on page11.
•7350-K964 2-Bag Bagging Area (RAL 7021 Black) on page13.

1-2 7350 2-Bag Bagwell Upgrade
7350-K140 2-Bag Bagging Area (G/11)
Part Number Description
497-0526236 2-Bag Bagging Area (G/11)

7350 2-Bag Bagwell Upgrade 1-3
Part Number Description
795-0283601 2-Bag Door Assembly (G/11)
795-0134201 2-Bag Backsplash Panel (G/11)
795-0134101 2-Bag Front Panel (G/11)
795-0133301 2-Bag Bagwell Side Panel (G/11)
006-8604541 Screw - 1/4-20x1/2, Pan Head, Phillips (4pcs)
497-0472268 2-Bag Scale Tray with Bag Rack Hardware
497-0466205 Skirt - 2-Bag BOM Package
497-0525620 2-Bag Frame Assembly with Leveling Feet and Casters
497-0467814 Scale Controller and Pods Assembly
497-0457054 Black Nylon Spacer 15mm OD x 10.4mm ID x 10mm L (6pcs)
497-0518273 2-Bag Upper Bumper
497-0455521 2-Bag Bagwell Backsplash Plastic Deflector
497-0455519 Core Side Plastic Deflector
006-8611143 Nut Keps, 8-32, Steel, Blue Zinc (5pcs)
006-8611505 Nylon Bushing (2pcs)
009-0005930 Cable Tie-snap in Mounting (3pcs)
006-8623998 Screw - 1/4-20 x 1-21/64’’, Phillips Flat Head, 82 Degree,
Machine Thread, Zinc-Plated Steel (4pcs)
006-8612492 Screw - 1/4-20 x 0.750", Phillips Flat Head, 82 Degree, Machine
Thread, Zinc-Plated Steel (6pcs)
006-8612446 Screw - 8-32 x 0.375" Phil Pan, Self Tapping - Type F (10pcs)
006-8616060 Screw - 1/4-20 x 0.75", Pan Head, Phillips, Zinc Plated Steel
(8pcs)
* 795-0281699 Hole Cover Label - (G/11)
* 497-0445077 Cable: (Black) 4M USB +Power (12V) to 2x4 Latch-N-Lok
* 497-0426042 Bag - 2 and 3.5 Bagger, LHC and RHC, Input Belt
497-0421485 Power Strip, IEC 4-POS, Plastic Case
* 497-0513382 Multiple Power Sources/ Disconnect Power Caution Label
* 007-9714414 Tiestrap Plain 5.60LG (2pcs)
* 497-0423108 Kit Instructions (Reference Sheet)
* Items marked with an asterisk are not called out on the image.

1-4 7350 2-Bag Bagwell Upgrade
7350-K141 2-Bag Bagging Area (Battleship Gray)
Part Number Description
497-0526239 2-Bag Bagging Area (Battleship Gray)

7350 2-Bag Bagwell Upgrade 1-5
Part Number Description
795-0283616 2-Bag Door Assembly (Battleship Gray)
795-0134216 2-Bag Backsplash Panel (Battleship Gray)
795-0134116 2-Bag Front Panel (Battleship Gray)
795-0133316 2-Bag Side Panel (Battleship Gray)
006-8604541 Screw - 1/4-20x1/2, Pan Head, Phillips (4pcs)
497-0472268 2-Bag Scale Tray with Bag Rack Hardware
497-0466205 Skirt - 2-Bag BOM Package
497-0525620 2-Bag Frame Assembly with Leveling Feet and Casters
497-0467814 Scale Controller and Pods Assembly
497-0457054 Black Nylon Spacer 15mm OD x 10.4mm ID x 10mm L (13pcs)
497-0518273 2-Bag Upper Bumper
497-0455521 2-Bag Bagwell Backsplash Plastic Deflector
497-0455519 Core Side Plastic Deflector
006-8611143 Nut Keps, 8-32, Steel, Blue Zinc (9pcs)
006-8611505 Nylon Bushing (2pcs)
006-8613174 Wire Saddle – Locking Top (3pcs)
006-8623998 Screw - 1/4-20 x 1-21/64’’, Phillips Flat Head, 82 Degree,
Machine Thread, Zinc-Plated Steel (4pcs)
006-8612492 Screw - 1/4-20 x 0.750", Phillips Flat Head, 82 Degree, Machine
Thread, Zinc-Plated Steel (13pcs)
006-8612446 Screw - 8-32 x 0.375" Phil Pan, Self Tapping - Type F (10pcs)
006-8616060 Screw - 1/4-20 x 0.75", Pan Head, Phillips, Zinc Plated Steel
(8pcs)
* 795-0281616 Hole Cover Label (Battleship Gray)
* 497-0445077 Cable: (Black) 4M USB +Power (12V) to 2x4 Latch-N-Lok
* 497-0426042 Bag - 2 and 3.5 Bagger, LHC and RHC, Input Belt
497-0421485 Power Strip, IEC 4-POS, Plastic Case
* 497-0513382 Multiple Power Sources/ Disconnect Power Caution Label
497-0518274 2-Bag Rear Door Bumper

1-6 7350 2-Bag Bagwell Upgrade
Part Number Description
497-0518276 2-Bag Core Side Lower Back Bumper
497-0518277 2-Bag Wrap-Around Side Corner Bumper
497-0455678 2-Bag Rear Frame Support Bracket
* 497-0423108 Kit Instructions (Reference Sheet)
* Items marked with an asterisk are not called out on the image.

7350 2-Bag Bagwell Upgrade 1-7
7350-K142 2-Bag Bagging Area (Dark Red)
Part Number Description
497-0526240 2-Bag Bagging Area (Dark Red)

1-8 7350 2-Bag Bagwell Upgrade
Part Number Description
795-0283618 2-Bag Door Assembly (Dark Red)
795-0134218 2-Bag Backsplash Panel (Dark Red)
795-0134118 2-Bag Front Panel (Dark Red)
795-0133318 2-Bag Bagwell Side Panel (Dark Red)
* 795-0281618 Hole Cover Label (Dark Red)
006-8604541 Screw, 1/4-20x1/2, Pan Head, Phillips (4pcs)
497-0457054 Black Nylon Spacer 15mm OD x 10.4mm ID x 10mm L (6pcs)
497-0525620 2-Bag Frame Assembly with Leveling Feet and Casters
497-0466205 Skirt - 2 Bag BOM Package
497-0467814 Scale Controller and Pods Assembly
497-0472268 2-Bag Scale Tray with Bag Rack Hardware
006-8611143 Nut Keps, 8-32, Steel, Blue Zinc (5pcs)
006-8611505 Nylon Bushing (2pcs)
497-0455519 Core Side Plastic Deflector
497-0455521 2-Bag Bagwell Backsplash Plastic Deflector
497-0518273 2-BagUpper Bumper
009-0005930 Cable Tie-snap in Mounting (3pcs)
006-8612446 Screw - 8-32 x 0.375" Phil Pan, Self Tapping - Type F (10pcs)
006-8612492 Screw - 1/4-20 x 0.750", Phillips Flat Head, 82 Degree, Machine
Thread, Zinc-Plated Steel (6pcs)
006-8616060 Screw - 1/4-20 x 0.75", Pan Head, Phillips, Zinc Plated Steel
(8pcs)
006-8623998 Screw - 1/4-20 x 1-21/64’’, Phillips Flat Head, 82 Degree,
Machine Thread, Zinc-Plated Steel (4pcs)
497-0421485 Power Strip, IEC 4-POS, Plastic Case
* 497-0426042 Bag - 2 and 3.5 Bagger, LHC and RHC, Input Belt
* 497-0445077 Cable: (Black) 4M USB +Power (12V) to 2x4 Latch-N-Lok
* 007-9714414 Tiestrap Plain 5.60LG (2pcs)
* 497-0513382 Multiple Power Sources/ Disconnect Power Caution Label
* 497-0423108 Kit Instructions (Reference Sheet)
* Items marked with an asterisk are not called out on the image.

7350 2-Bag Bagwell Upgrade 1-9
7350-K143 2-Bag Bagging Area (RAL 9001 Cream)
Part Number Description
497-0526238 2-Bag Bagging Area (RAL 9001 Cream)

1-10 7350 2-Bag Bagwell Upgrade
Part Number Description
795-0283609 2-Bag Door Assembly (RAL 9001 Cream)
795-0134209 2-Bag Backsplash Panel (RAL 9001 Cream)
795-0134109 2-Bag Front Panel (RAL 9001 Cream)
795-0133309 2-Bag Bagwell Side Panel(RAL 9001 Cream)
006-8604541 Screw -1/4-20x1/2, Pan Head, Phillips (4pcs)
497-0472268 2-Bag Scale Tray with Bag Rack Hardware
497-0466205 Skirt - 2 Bag BOM Package
497-0525620 2-Bag Frame Assembly with Leveling Feet and Casters
497-0467814 Scale Controller and Pods Assembly
497-0457054 Black Nylon Spacer 15mm OD x 10.4mm ID x 10mm L (6pcs)
497-0518273 2-Bag Upper Bumper
497-0455521 2-Bag Bagwell Backsplash Plastic Deflector
497-0455519 Core Side Plastic Deflector
006-8611143 Nut Keps, 8-32, Steel, Blue Zinc (5pcs)
006-8611505 Nylon Bushing (2pcs)
009-0005930 Cable Tie-snap in Mounting (3pcs)
006-8623998 Screw - 1/4-20 x 1-21/64’’, Phillips Flat Head, 82 Degree,
Machine Thread, Zinc-Plated Steel (4pcs)
006-8612492 Screw - 1/4-20 x 0.750", Phillips Flat Head, 82 Degree, Machine
Thread, Zinc-Plated Steel (6pcs)
006-8612446 Screw - 8-32 x 0.375" Phil Pan, Self Tapping - Type F (10pcs)
006-8616060 Screw - 1/4-20 x 0.75", Pan Head, Phillips, Zinc Plated Steel
(8pcs)
* 795-0281609 Hole Cover Label (RAL 9001 Cream)
* 497-0445077 Cable: (Black) 4M USB +Power (12V) to 2x4 Latch-N-Lok
* 497-0426042 Bag - 2 and 3.5 Bagger, LHC and RHC, Input Belt
497-0421485 Power Strip, IEC 4-POS, Plastic Case
* 497-0513382 Multiple Power Sources/ Disconnect Power Caution Label
* 007-9714414 Tiestrap Plain 5.60LG (2pcs)
* 497-0423108 Kit Instructions (Reference Sheet)
* Items marked with an asterisk are not called out on the image.

7350 2-Bag Bagwell Upgrade 1-11
7350-K145 2-Bag Bagging Area (Walmart Blue)
Part Number Description
497-0526496 2-Bag Bagging Area (Walmart Blue)

1-12 7350 2-Bag Bagwell Upgrade
Part Number Description
795-0283612 2-Bag Door Assembly (Walmart Blue)
795-0134212 2-Bag Backsplash Panel (Walmart Blue)
795-0134112 2-Bag Front Panel (Walmart Blue)
795-0133312 2-Bag Bagwell Side Panel (Walmart Blue)
* 795-0281612 Hole Cover Label (Walmart Blue)
006-8604541 Screw - 1/4-20x1/2, Pan Head, Phillips (4pcs)
497-0525620 2-Bag Frame Assembly with Leveling Feet and Casters
497-0466205 Skirt - 2-Bag BOM Package
497-0472268 2-Bag Scale Tray with Bag Rack Hardware
006-8611143 Nut Keps, 8-32, Steel, Blue Zinc (5pcs)
006-8611505 Nylon Bushing (2pcs)
497-0455519 Core Side Plastic Deflector
497-0455521 2-Bag Bagwell Backsplash Plastic Deflector
009-0005930 Cable Tie-snap in Mounting (3pcs)
006-8612446 Screw - 8-32 x 0.375" Phil Pan, Self Tapping - Type F (14pcs)
006-8616060 Screw - 1/4-20 x 0.75", Pan Head, Phillips, Zinc Plated Steel
(8pcs)
006-8623998 Screw - 1/4-20 x 1-21/64’’, Phillips Flat Head, 82 Degree,
Machine Thread, Zinc-Plated Steel (4pcs)
497-0421485 Power Strip, IEC 4-POS, Plastic Case
* 497-0426042 Bag - 2 AND 3.5 Bagger, LHC and RHC, Input Belt
* 007-9714414 Tiestrap Plain 5.60LG (2pcs)
* 497-0513382 Multiple Power Sources/ Disconnect Power Caution Label
497-0521432 Top Spacer Bracket (4pcs)
* 497-0423108 Kit Instructions (Reference Sheet)
* Items marked with an asterisk are not called out on the image.

7350 2-Bag Bagwell Upgrade 1-13
7350-K964 2-Bag Bagging Area (RAL 7021 Black)
Part Number Description
497-0526237 2-Bag Bagging Area (RAL 7021 Black)

1-14 7350 2-Bag Bagwell Upgrade
Part Number Description
795-0283607 2-Bag Door Assembly (RAL 7021 Black)
795-0134207 2-Bag Backsplash Panel (RAL 7021 Black)
795-0134107 2-Bag Front Panel (RAL 7021 Black)
795-0133307 2-Bag Bagwell Side Panel (RAL 7021 Black)
006-8604541 Screw - 1/4-20x1/2, Pan Head, Phillips (4pcs)
497-0472268 2-Bag Scale Tray with Bag Rack Hardware
497-0466205 Skirt - 2-Bag BOM Package
497-0525620 2-BagFrame Assembly with Leveling Feet and Casters
497-0467814 Scale Controller and Pods Assembly
497-0457054 Black Nylon Spacer 15mm OD x 10.4mm ID x 10mm L (6pcs)
497-0518273 2-Bag Upper Bumper
497-0455521 2-Bag Bagwell Backsplash Plastic Deflector
497-0455519 Core Side Plastic Deflector
006-8611143 Nit Keps, 8-32, Steel, Blue Zinc (5pcs)
006-8611505 Nylon Bushing (2pcs)
009-0005930 Cable Tie-snap in Mounting (3pcs)
006-8623998 Screw - 1/4-20 x 1-21/64’’, Phillips Flat Head, 82 Degree,
Machine Thread, Zinc-Plated Steel (4pcs)
006-8612492 Screw - 1/4-20 x 0.750", Phillips Flat Head, 82 Degree, Machine
Thread, Zinc-Plated Steel (6pcs)
006-8612446 Screw - 8-32 x 0.375" Phil Pan, Self Tapping - Type F (10pcs)
006-8616060 Screw - 1/4-20 x 0.75", Pan Head, Phillips, Zinc Plated Steel
(8pcs)
* 795-0281607 Hole Cover Label (RAL 7021 Black)
* 497-0445077 Cable: (Black) 4M USB +Power (12V) to 2x4 Latch-N-Lok
* 497-0426042 Bag - 2 and 3.5 Bagger, LHC and RHC, Input Belt
497-0421485 Power Strip, IEC 4-POS, Plastic Case
* 497-0513382 Multiple Power Sources/ Disconnect Power Caution Label
* 007-9714414 Tiestrap Plain 5.60LG (2pcs)
* 497-0423108 Kit Instructions (Reference Sheet)
* Items marked with an asterisk are not called out on the image.

7350 2-Bag Bagwell Upgrade 1-15
Installation Procedures
Installing the Bagwell upgrade involves the following procedures:
•Removing Existing Bagwell on the next page.
•Changing Bagwell Orientation on page21.
Note: This procedure may be optional.
•Installing New Bagwell on page28.
•Installing Bagwell Skirt Panels on page36.
•Routing Cables on page38.

1-16 7350 2-Bag Bagwell Upgrade
Removing Existing Bagwell
To remove an existing 2-Bag Bagwell, follow these steps:
Note: To remove a 1-Bag Bagwell refer to 7350-K120/K121/K122/K123/K125/K962/K967
2-Bag Bagwell Upgrade. To remove a 3-Bag Bagwell refer to 7350-
K160/K162/K164/K165/K996 3-Bag Bagwell Upgrade.
1. Detach the Scale Tray from the Bagwell by removing four (4) flat head screws.
Note: Remove bag racks if present.