NCXX UNX-05G User manual

1
UNX-05G
User’s Manual

2
Portable 5G Modem is a kind of online device which designed for the user who may use mobile internet to get
online, and the user may access to the internet at anywhere and anytime.
About Portable 5G Modem

3
Part Names and Functions

4
nano SIM Card tray
Reset button
The product settings can be restored to the factory default settings.
USB Type-C port
Connect USB Type-C cable (sample).
Ethernet ポート
Connect LAN cable.
Temperature rise warning indicator
This LED indicates that the temperature of this product has risen and communication is
restricted or stopped.
Power indicator
Indicator for power supply status.
Ethernet indicator
Indicator for LAN status.
Wi-Fi indicator
Indicator for Wi-F status.
5G/4G indicator
This indicator indicates the type and strength of the radio wave being received.
Special Screws
ラベル
SSID, encryption key, etc. can be confirmed.
■A label printed with IMEI information (product identification number) and other information is
attached to the bottom of this product. Do not remove the sticker, as the IMEI number will be
required for repair requests and after-sales service.
■Place the product with the logo side turned up.
The radio wave condition of the 5G/4G antenna is improved.
■With the product powered on, insert the tip of the SIM eject pin (sample) into the RESET button
hole. Hold down the RESET button for at least 5 seconds. The product will automatically restart
and the settings will be restored to its factory default settings.

2
The following indicator lamps inform you of the communication status of the product.
High Temperature lamp
Product Condition
Color and Lighting Pattern
Stop Operation
Red Lighting
Functional limitation
Orange Flashing
(Lights on ⇔lights off at the same interval)
Normal Operation
OFF
Power lamp
Product Condition
Color and Lighting Pattern
Boot Sequence
Cyan Lighting
Power Rule
15W mode
Blue Lighting
7.5W mode
Green Lighting
4.5W mode
Orange Lighting
Lack of supply capacity
Red Lighting
Factory Reset
Cyan Flashing
(Lights on ⇔lights off at the same interval)
5G/4G connection lamp
Product Condition
Color and Lighting Pattern
5G
Antenna Level : 4 –5ber
Blue Lighting
Antenna Level : 3ber
Blue Flashing
(Long light on ⇔short light off)
Antenna Level : 2ber
Blue Flashing
(Lights on ⇔lights off at the same interval)
Antenna Level : 1ber
Blue Flashing
(Short light on ⇔Long light off)
LTE
Antenna Level : 4 –5ber
Green Lighting
Antenna Level : 3ber
Green Flashing
(Long light on ⇔short light off)
Antenna Level : 2ber
Green Flashing
(Lights on ⇔lights off at the same interval)
Antenna Level : 1ber
Green Flashing
(Short light on ⇔Long light off)
Network searching
Cyan Flashing
Indicator lamp

3
(Lights on ⇔lights off at the same interval)
Out of service
Standby State for Modem
Red Flashing
(Lights on ⇔lights off at the same interval)
SIM PIN Lock State / SIM Error
Red Lighting
ME-PIN Lock State
Orange Lighting
APN Error
Red
Wi-Fi connection lamp
Product Condition
Color and Lighting Pattern
Wi-Fi mode
2.4GHz
Blue Lighting
2.4GHz、5GHz、
Orange Lighting
DFS
Red Flashing
(Lights on ⇔lights off at the same interval)
Wi-Fi OFF
OFF
Ethernet port connection lamp
Product Condition
Color and Lighting Pattern
Link speed
1000Mbps
Green Lighting
100Mbps
Orange Lighting
Ethernet No Link / Disable
OFF

4
Before inserting/removing the SIM Card, ensure you turn off the product.
Insert/remove the card with the logo side of the product turned up.
1Insert the tip of the SIM eject pin (sample) into the SIM Card tray hole.
Push the tool firmly in until the SIM card tray comes out.
Pushing this other than straight in may cause damage or malfunction.
2Pull out the SIM Card tray.
Inserting the SIM Card

5
3Put the nano SIM (4FF) Card into the SIM Card tray with the IC (metal) side facing down.
Check the direction of the IC Card, and place it security in the SIM Card tray.
4Insert the SIM Card tray fully into the product straight and horizontally with logo side facing up.
Notches
IC (metal) side

6
1Connect the USB Type-C cable (sample) to the USB Type-C port on this product and the USB Type-C port on the
PC.
Insert the cable straight to the back.
2Launch the Web browser
3Input the URL
Enter "http://192.168.0.1/" in the URL entry field and press "Enter".
4Enter the user name and password on the login screen
Enter "admin" in the User Name field and "admin" in the Password field and click "LOGIN".
Enter lower-case single-byte alphanumeric characters.
5Set the connection destination
Select “WAN Settings”→“Profile Management”and click “New Profile”.
Set the connection destination (APN), user name, and password obtained from your provider.
Click “Save”to save the profile.
6Select the connection destination
If multiple profiles are registered, select a profile from "Carrier Name" and click "Apply".
Set the connection destination
USB Type-C cable
(sample)

7
This product does not turn on
・Is the USB TYPE-C cable (sample) correctly plugged into the product?
・Is the USB TYPE-C cable (sample) correctly plugged into the PC?
・Some energy-saving PCs may have the power to this product turned off. If the indicator lamp of
this product is off, the power to this product may not be supplied, so check the power status
according to the instruction manual of the PC.
The product becomes hot during operation
・This product and the USB TYPE-C cable (sample) may become warm during operation, but there
is no problem with operation.
Unable to communicate
・Is the 5G/4G connection lamp lit in red?
Make sure the SIM card is installed correctly.
The SIM card PIN code may be valid, PIN locked, or completely locked. Check your PIN code
settings.
・Is the 5G/4G connection lamp blinking in red?
Disconnect the USB TYPE-C cable (sample) connected to this product and then reinsert it
to restart this product.
If the problem persists, relocate this product in a location where radio waves are more likely
to reach.
・Depending on the nature of radio waves or the congestion of radio waves depending on the time
of day, communication may be interrupted or the service may not be able to be used normally.
Please wait for a while before using.
・Microsoft®, Windows®, Internet Explorer®, and Microsoft Edge are trademarks or registered
trademarks of Microsoft Corporation in the United States and other countries.
・Mac, macOS, Safari are trademarks or registered trademarks of Apple Inc. in the United States
and other countries.
・Intel and Intel are trademarks of Intel Corporation in the United States and other countries.
・QR Code is a registered trademark of DENSO WAVE INCORPORATED.
・Ethernet and Ethernet are registered trademarks of FUJIFILM Business Innovation Corporation.
・USB Type-C™ is a trademark of USB Implementers Forum.
・Wi-Fi®, Wi-Fi Alliance®, Wi-Fi CERTIFIED®, Wi-Fi Protected Access® (WPA), WPA2™, WPA3™
and Wi-Fi Protected Setup™ are trademarks or registered trademarks of Wi-Fi Alliance.
・LTE is a registered trademark of the European Telecommunications Standards Institute (ETSI).
・Google, Android, and Google Chrome are trademarks of Google LLC.
・Adobe Reader and Acrobat Reader are trademarks or registered trademarks of Adobe Systems
Incorporated in the United States and other countries.
・All other company and product names are trademarks or registered trademarks of their
respective owners. The TM and ® marks may be omitted in the text.
Troubleshooting
Trademarks