ST-EX2023 Installation Instructions / Instructions d'installation / Montageanweisung /Instrucciones de instalación /
Istruzioni di installazione / 取扱説明書 / 安装说明书
English
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
Français
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
Deutsch
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
Español
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
Italiano
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
日本語
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
简体中文
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
1234
AB
English
1
23
Français Deutsch
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1Press Quick Release Button Aand pull out the attachment foot.
2Attach the attachment foot with "23 only".
31) Turn off the power to the monitor.
2) Paste two rubber feet Bon the bottom of the monitor.
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
Unit: mm
Weight: ??
Weight: ??
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1Press Quick Release Button Aand pull out the attachment foot.
2Attach the attachment foot with "23 only".
31) Turn off the power to the monitor.
2) Paste two rubber feet Bon the bottom of the monitor.
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
Unité: mm
Poids: ??
Poids: ??
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1Press Quick Release Button Aand pull out the attachment foot.
2Attach the attachment foot with "23 only".
31) Turn off the power to the monitor.
2) Paste two rubber feet Bon the bottom of the monitor.
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
Einheit: mm
Gewicht: ??
Gewicht: ??
