NEC Express5800/B110d User manual

NEC Express5800/B110d
Configuration Guide
Introduction
This document contains product and configuration information that will enable you to configure your system. The
guide will ensure fast and proper configuration of your NEC Express5800 server.
January 16, 2014
Revision 5.0
NEC Corporation

SYSTEM CONFIGURATION GUIDE –NEC Express5800/B110d
NEC Corporation Revision 5.0 –January 16, 2014 2
Contents
TECHNICAL SPECIFICATION........................................................................................3
Key Features..........................................................................................................................................3
Specification..........................................................................................................................................3
EXTERNAL VIEWS .........................................................................................................5
Front Views............................................................................................................................................5
CONFIGURATION DIAGRAM.........................................................................................6
EXPANSION SLOT..........................................................................................................6
SERVER CONFIGURATION ...........................................................................................7
1Base Models...................................................................................................................................7
2Memory ...........................................................................................................................................7
2.1 Memory Configuration..........................................................................................................7
3Internal Drives................................................................................................................................9
3.1 Drive and RAID Configuration .............................................................................................9
3.2 Internal Drive Configuration.................................................................................................9
4I/O Expansion Card......................................................................................................................11
4.1 Network Interface Controller..............................................................................................11
4.2 External Storage Controller ...............................................................................................12
5Other Add-in Components..........................................................................................................12
5.1 Trusted Platform Module Kit ..............................................................................................13
5.2 Internal Flash Memory.......................................................................................................13
REFERENCES...............................................................................................................14
Server Management............................................................................................................................14
OS Support Matrix for PCI Cards and Embedded Controllers .......................................................15
Support Matrix for Adapters and Network Interconnect Devices ..................................................16
Supporting PCI Cards and Installable Slots.....................................................................................17
Copyright Notice and Liability Disclaimer........................................................................................18
REVISION HISTORY .....................................................................................................19

SYSTEM CONFIGURATION GUIDE –NEC Express5800/B110d
NEC Corporation Revision 5.0 –January 16, 2014 3
Technical Specification
Key Features
High performance with the latest Intel® Pentium® processor family
Up to 192 GB of high speed DDR3-1066 memory
Full manageability by integrated EXPRESSSCOPE Engine 3
Specification
Model
B110d
Part Number
N8400-137F
Processor
Type
Intel® Pentium® processor 1403
Clock speed
2.60 GHz
Number of Processors
1
Cache
5 MB
Cores and Threads
2C-2T
Chipset
Intel® C602 Chipset
Memory
Type
DDR3-1333 ECC Unbuffered Low Power DIMM
DDR3-1600 and DDR3-1066 ECC Registered Low Power DIMM
Standard Capacity
0 GB
Maximum Capacity
192 GB (Six 32 GB)
Memory protection
ECC, x4 SDDC, Memory Lockstep 1, Memory Mirror 1
Internal Storage
Standard Capacity
0 GB
Maximum Capacity
SAS HDD: 2.4 TB (Two 1.2 TB)
SATA HDD: 2 TB (Two 1 TB)
SATA SSD: 800 GB ( Two 400GB)
Disk Controller
SATA : 6Gb/s (Integrated)
SAS: 6Gb/s (Optional)
RAID
SATA : RAID 0/1 (Optional2)
SAS : RAID 0/1 (Optional)
Hot Plug
Supported
Disk Drive Bays [free]
2 [2]
Expansion Slots
[free]
Standard
Total: 2 slots available
1[1] Type 2 mezzanine
1[1] PCIe for a flexible integrated NIC
Video
Controller (VRAM)
Integrated in Server Management Controller (32MB)
Resolution / Color
640x480 –1280x1024 / 16.7M 3
Interfaces
1 SUV (1 front)
Server Management
EXPRESSSCOPE Engine 3
Maximum Power Consumption (VDC)
142 Watt
Dimensions (W x D x H )
51.6 x 515.4 x 180.7 mm / 2.0 x 20.3 x 7.1 in
Maximum Weight
4 kg, 8.81 lbs.
Enclosures
Blade Enclosure M, Blade Enclosure-H v2
Temperature, Relative Humidity
(non-condensing)
Operating: 10° to 35° C / 50° to 95° F, 20 to 80%
Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80%
Regulatory and Safety
FCC, CE, BSMI, CCC, UL, CB, RoHS, WEEE
Operating Systems
Microsoft® Windows Server® 2003 R2, Standard Edition
Microsoft® Windows Server® 2003 R2, Enterprise Edition
Microsoft® Windows Server® 2003 R2, Standard x64 Edition
Microsoft® Windows Server® 2003 R2, Enterprise x64 Edition
Microsoft® Windows Server® 2008 Standard
Microsoft® Windows Server® 2008 Enterprise

SYSTEM CONFIGURATION GUIDE –NEC Express5800/B110d
NEC Corporation Revision 5.0 –January 16, 2014 4
Model
B110d
Operating Systems and Virtualization
Software
Microsoft® Windows Server® 2008 Standard (x64)
Microsoft® Windows Server® 2008 Enterprise (x64)
Microsoft® Windows Server® 2008 R2 Standard
Microsoft® Windows Server® 2008 R2 Enterprise
Microsoft® Windows Server® 2012 Standard 4
Microsoft® Windows Server® 2012 Datacenter 4
Red Hat Enterprise Linux 5.8 or later (x86) 5
Red Hat Enterprise Linux 5.8 or later (EM64T) 5
Red Hat Enterprise Linux 6.2 or later (x86) 5
Red FHat Enterprise Linux 6.2 or later (x86_64) 5
1To configure memory mirror and memory lockstep configuration, contact our sales representative.
2Embedded SATA RAID controller is supported only on limited OS. For more details, please see OS Support
Matrix for PCI Cards and Embedded Controllers.
3Maximum resolution and color available via EXPRESSSCOPE Engine 3 remote console is 1280 x 1024 / 65K
colors.
4For Windows Server 2012 installation, download the driver kit from the following website and install it after OS
installation
http://www.nec.com/en/global/prod/express/download/
5For Linux support, contact our sales representative or go to the NEC website at:
http://www.nec.com/global/prod/express/linux/index.html

SYSTEM CONFIGURATION GUIDE –NEC Express5800/B110d
NEC Corporation Revision 5.0 –January 16, 2014 5
External Views
Front Views
Internal Drive Configuration
Drive-less Configuration
Legend
A.
Power LED
G.
Data LAN 2 Activity LED
B.
Power Button
H.
UID LED Button
C.
System Status LED
I.
UID LED
D.
Dump (NMI) Switch
J.
SUV Connector
E.
Data LAN 1 Activity LED
K.
Drive Bay
F.
System Reset Switch
1
0
E
F
G
K
A
B
C
D
H
J
I
E
F
G
A
B
C
D
H
J
I

SYSTEM CONFIGURATION GUIDE –NEC Express5800/B110d
NEC Corporation Revision 5.0 –January 16, 2014 6
Configuration Diagram
Legend: Standard Components Mandatory components
Expansion Slot
Legend
#1
Type-II mezzanine card slot
#2
Flexible integrated NIC card slot
Processor #1
CHASSIS
FRONT
LAN Slot
CHASSIS
TOP
Two 2.5-inch Drives or
Blank Panel
1 DIMM Slot
6 DIMM Slots
2.5-inch Drive Cage or
Blank Panel
Type II
#1
#2

SYSTEM CONFIGURATION GUIDE –NEC Express5800/B110d
NEC Corporation Revision 5.0 –January 16, 2014 7
Server Configuration
1 Base Models
Product Name / Description
Part Number
NEC Express5800 B110d (2C/1403)
no RAM, no Drive Cage, no Network Controller
Including:
One Intel Pentium processor 1403, EXPRESSBUILDER DVD
N8400-137F
2 Memory
2.1 Memory Configuration
Available slots: 6
Category
Product Name / Description
Part Number
Unbuffered DIMM
(UDIMM)
2GB DDR3-1333 UNB Memory Kit
One 2GB Unbuffered ECC DIMM, DDR3L-1333(PC3L-10600)
NOTE: The x4 SDDC is not supported.
N8402-122F
4GB DDR3-1333 UNB Memory Kit
One 4GB Unbuffered ECC DIMM, DDR3L-1333(PC3L-10600)
NOTE: The x4 SDDC is not supported.
N8402-123F
Registered DIMM
(RDIMM)
8GB DDR3-1600 REG Memory Kit
One 8GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
N8402-155F
16GB DDR3-1600 REG Memory Kit
One 16GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
N8402-136F
32GB DDR3-1066 REG Memory Kit
One 32GB Registered ECC DIMM, DDR3L-1066(PC3L-8500)
N8402-118F
NOTE:
Minimum one memory kit per processor must be installed.
It is recommended to install three identical memory kits for triple-channel symmetric memory
configurations to increase memory transfer speed.
Mix configurations of UDIMM/RDIMM are not supported.
The maximum memory speed is 800 MHz, regardless of the type of DIMMs.

SYSTEM CONFIGURATION GUIDE –NEC Express5800/B110d
NEC Corporation Revision 5.0 –January 16, 2014 8
Maximum Available Memory
See the table below for the maximum memory size that you can actually use on your system.
The maximum available memory is less than the maximum physical memory supported by your system
because some chipsets require PCI resource space of about 750MB. PCI resource requirements vary
depending on the type and the number of PCI cards you are using.
Maximum Memory Size Supported by Operating Systems
Maximum Available Memory
Microsoft Windows Server 2003 R2, Standard Edition
Microsoft Windows Server 2008 Standard
4 GB
4 GB (HW-DEP enabled)
App. 3.6 GB (HW-DEP disabled)
Microsoft Windows Server 2003 R2, Standard x64 Edition
Microsoft Windows Server 2008 Standard (x64)
Microsoft Windows Server 2008 R2 Standard
32 GB
32 GB
Microsoft Windows Server 2003 R2, Enterprise Edition
Microsoft Windows Server 2008 Enterprise
64 GB
64 GB
Microsoft Windows Server 2003 R2, Enterprise x64 Edition
1 TB
192 GB
Microsoft Windows Server 2008 Enterprise (x64)
Microsoft Windows Server 2008 R2 Enterprise
2 TB
192 GB
Microsoft Windows Server 2012 Standard
Microsoft Windows Server 2012 Datacenter
4 TB
192 GB
Red Hat Enterprise Linux 5
Red Hat Enterprise Linux 6
16 GB
16 GB
Red Hat Enterprise Linux 5 (EM64T)
1 TB
192 GB
Red Hat Enterprise Linux 6 (x86_64)
2 TB
192 GB

SYSTEM CONFIGURATION GUIDE –NEC Express5800/B110d
NEC Corporation Revision 5.0 –January 16, 2014 9
3 Internal Drives
3.1 Drive and RAID Configuration
Refer to the section in accordance with your drive configuration.
NOTE:
Hot plug insertion/removal are not supported in the Embedded SATA configuration.
Embedded SATA RAID controller is supported only on limited OS. For more details, please see OS
Support Matrix for PCI Cards and Embedded Controllers.
All hard drives within a RAID array should be of the same capacity and rotation speed.
Mixing SAS and SATA hard drives in the same system is not supported.
3.2 Internal Drive Configuration
3.2.1 Drive-less
Category
Product Name / Description
Part Number
Drive Cage
Required
Drive-less Blade Kit
Blank panel
N8403-056F
3.2.2 Embedded SATA non-RAID Controller
Category
Product Name / Description
Part Number
Drive Cage
Required
SATA Drive Cage Kit
Two 2.5-inch hot plug hard drive bays, one internal SATA cable
N8403-057F
Drive
2 slots
available
SATA
HDD
250GB 7.2K Hot Plug 2.5-inch SATA HDD
One 250 GB, 2.5-inch, SATA2, 7,200 rpm
N8450-040
500GB 7.2K Hot Plug 2.5-inch SATA HDD
One 500 GB, 2.5-inch, SATA2, 7,200 rpm
N8450-041
1TB 7.2K Hot Plug 2.5-inch SATA HDD
One 1 TB, 2.5-inch, SATA2, 7,200 rpm
N8450-042
SATA
SSD
100GB Hot Plug 2.5-inch SATA SSD
One 100 GB, 2.5-inch, eMLC, SATA2
N8450-705
400GB Hot Plug 2.5-inch SATA SSD
One 400 GB, 2.5-inch, eMLC, SATA2
N8450-707
NOTE:
Hot plug insertion/removal is not supported.
Drive-less
Refer to 3.2.1
Refer to 3.2.3
None
Available Interface
Embedded SATA
RAID Controller
Refer to 3.2.2
SATA
Non-RAID
Refer to
RAID 0/1
Optional RAID
Controller
SAS, SATA
SATA
Two drives

SYSTEM CONFIGURATION GUIDE –NEC Express5800/B110d
NEC Corporation Revision 5.0 –January 16, 2014 10
3.2.3 Embedded SATA RAID Controller
Category
Product Name / Description
Part Number
Drive Cage
Required
SATA Drive Cage Kit
Two 2.5-inch hot plug hard drive bays, one internal SATA cable
N8403-057F
Drive
2 slots
available
SATA
HDD
250GB 7.2K Hot Plug 2.5-inch SATA HDD
One 250 GB, 2.5-inch, SATA2, 7,200 rpm
N8450-040
500GB 7.2K Hot Plug 2.5-inch SATA HDD
One 500 GB, 2.5-inch, SATA2, 7,200 rpm
N8450-041
1TB 7.2K Hot Plug 2.5-inch SATA HDD
One 1 TB, 2.5-inch, SATA2, 7,200 rpm
N8450-042
SATA
SSD
100GB Hot Plug 2.5-inch SATA SSD
One 100 GB, 2.5-inch, eMLC, SATA2
N8450-705
400GB Hot Plug 2.5-inch SATA SSD
One 400 GB, 2.5-inch, eMLC, SATA2
N8450-707
NOTE:
All hard drives within a RAID array should be of the same capacity.
Embedded SATA RAID controller is supported only on limited OS. For more details, please see OS
Support Matrix for PCI Cards and Embedded Controllers.
3.2.4 RAID 0/1 Controller with 512MB Cache
Category
Product Name / Description
Part Number
Drive Cage
Required
RAID Controller kit (512MB, RAID 0/1)
Two 2.5-inch hot plug hard drive bays, LSI MegaRAID SAS
9267-8i, RAID 0/1, 512 MB
N8403-059F
Drive
2 slots
available
SAS
HDD
300GB 10K Hot Plug 2.5-inch SAS HDD
One 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
N8450-032
600GB 10K Hot Plug 2.5-inch SAS HDD
One 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
N8450-034
900GB 10K Hot Plug 2.5-inch SAS HDD
One 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
N8450-035
1.2TB 10K Hot Plug 2.5-inch SAS HDD
One 1.2TB, 2.5-inch, SAS 6Gb/s, 10,000 rpm
N8450-043
146.5GB 15K Hot Plug 2.5-inch SAS HDD
One 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
N8450-036
300GB 15K Hot Plug 2.5-inch SAS HDD
One 300GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm
N8450-039
SATA
HDD
250GB 7.2K Hot Plug 2.5-inch SATA HDD
One 250 GB, 2.5-inch, SATA2, 7,200 rpm
N8450-040
500GB 7.2K Hot Plug 2.5-inch SATA HDD
One 500 GB, 2.5-inch, SATA2, 7,200 rpm
N8450-041
1TB 7.2K Hot Plug 2.5-inch SATA HDD
One 1 TB, 2.5-inch, SATA2, 7,200 rpm
N8450-042
SATA
SSD
100GB Hot Plug 2.5-inch SATA SSD
One 100 GB, 2.5-inch, eMLC, SATA2
N8450-705
400GB Hot Plug 2.5-inch SATA SSD
One 400 GB, 2.5-inch, eMLC, SATA2
N8450-707
NOTE:
All hard drives within a RAID array should be of the same capacity and rotation speed.
Mixing SAS and SATA hard drives in the same system is not supported.

SYSTEM CONFIGURATION GUIDE –NEC Express5800/B110d
NEC Corporation Revision 5.0 –January 16, 2014 11
4 I/O Expansion Card
4.1 Network Interface Controller
Category
Product Name / Description
Part Number
Riser
GbE
Dual Port 1GBASE Riser Card Kit
N8403-061F
10GbE
Dual Port 10GBASE Riser Card Kit
N8403-062F
Dual Port 10GBASE Riser Card Kit
iSCSI boot supported
N8403-064F
Adapter
Type I
GbE
1000BASE-T(2ch) adapter
Intel® 82571EB Gigabit Ethernet Adapter
N8403-021
Dual Port 1000BASE Adapter
Intel® Ethernet Controller I350-AM2
N8403-076F
10GbE
10GBASE-KR LAN interface card
Intel(R) 82599ES 10Gigabit Ethernet Adapter
NOTE:
- Connect to 10Gb Pass-Through Card or N8406-051F 10Gb
Intelligent L3 Switch.
- NEC Storage connection is not supported with RHEL6.
N8403-035
Dual Port 10GBASE Adapter
Broadcom BCM57810
N8403-065F
Dual Port 10GBASE Adapter
Broadcom BCM57810, iSCSI boot supported
N8403-067F
CNA
10Gb CNA Card 2Ch
Dual Port 10Gb Converged Network Adaptor
NOTE:
- For external FCoE Switch connection, connect via
N8406-035/036 10Gb Pass-Through Card.
N8403-072F
Adapter
Type II
GbE
1000BASE-T(4ch) adapter
Intel® 82571EB Gigabit Ethernet Adapter
N8403-022
Quad Port 1000BASE Adapter
Intel® Ethernet Controller I350-AM4
N8403-077F
NOTE:
One riser card kit must be installed.
Wake on LAN feature is supported only on the LAN riser cards.
The types and number of available NICs when installing 10GBASE Riser Card Kits
See the table below for the types and number of available NICs when a Dual Port 10GBASE Riser Card Kit
is installed on Windows Server 2008 or Windows Server 2008 R2 or Windows Server 2012.
The condition depends on interruption processing resulting from a processor and an operating system and
insufficient interruption processing resources may lead to system boot process requiring long time.
Processor
Type
Types and Number of Available NICs
1403
All of the NICs excluding Dual Port 10GBASE Adapters can be installed into any slots.

SYSTEM CONFIGURATION GUIDE –NEC Express5800/B110d
NEC Corporation Revision 5.0 –January 16, 2014 12
NIC Teaming feature
When using NIC teaming, please note the following:
Any of the network teaming must be processed in a single LAN controller.
Teaming feature is not supported on iSCSI interfaces.
To configure NIC bonding, please contact our sales representatives.
NIC Partitioning feature
N8403-062F/064F 10GBASE riser cards and N8403-065F/067F 10GBASE adapters support NIC
partitioning (NPAR.) To use NIC Partitioning, please note the following:
NIC Partitioning is supported on Windows Server 2008/2008R2 64bit OS and 64bit Linux OS only.
Using iSCSI Boot
To configure iSCSI boot system, please contact our sales representatives.
4.2 External Storage Controller
4.2.1 Fibre Channel Controller
Category
Product Name / Description
Part Number
Adapter
Type I
Fibre Channel Controller(4Gbps/2ch)
Emulex LightPulse LPe1105-N Host BusAdapter
N8403-018
Fibre Channel Controller(8Gbps/2ch)
Emulex LightPulse LPe1205-N Host Bus Adapter
N8403-034F
NOTE:
Link speed of two ports in one cards should be used with the same link speed.

SYSTEM CONFIGURATION GUIDE –NEC Express5800/B110d
NEC Corporation Revision 5.0 –January 16, 2014 13
5 Other Add-in Components
5.1 Trusted Platform Module Kit
Product Name / Description
Part Number
Trusted Platform Module Kit
TPM 1.2 module
N8415-002F
NOTE:
The kit is not available in China.
The kit is not removable after attachment.
"TPM Support" in BIOS setup menu must be activated prior to use of this product.
To use Windows BitLocker drive encryption, be sure to keep the "recovery password" of BitLocker
function. The recovery password is required to restore data for hardware replacement during a
system error.
5.2 Internal Flash Memory
Available socket: 1
Product Name / Description
Part Number
Internal Flash Memory
Internal flash memory to enable software and tools in the EXPRESSBUILDR DVD without
DVD media
NOTE:
Before use, software and tools must be copied from the EXPRESSBUILDER DVD to the
flash memory.
The following operations can be performed with the flash memory:
- Installation of Windows server with express setup
- Installation of Starter Pack—the package of NEC qualified drivers and system setting
tools
- Installation of NEC ESMPRO Agent and Universal RAID Utility
- Performance of the Test and Diagnosis Tool
N8415-003F

SYSTEM CONFIGURATION GUIDE –NEC Express5800/B110d
NEC Corporation Revision 5.0 –January 16, 2014 14
References
Server Management
The EXPRESSSCOPE Engine 3, integrated into the server, provides superior remote control and system
management features listed in the table below.
Standard
Hardware
monitoring
Temperature, voltage, power, drives,
degeneration (memory, hard drive)

Hardware event log collection

Boot monitoring
Booting, BIOS/POST stall, OS stall,
shutdown

Alerting
HW error, Boot error and OS panic
(by SNMP, E-Mail)

Remote KVM
POST/BIOS setup, DOS utility

(via LAN)
Panic screen, Boot screen

Text-based screen (OS console)

GUI-based screen (OS console)

Remote control
Remote reset/power on-off/ dump

(via LAN)
Power control

BIOS and BMC Firmware update

BIOS setting 1

OS shutdown

Remote media (CD/DVD, FD, USB Key)

Server Management Command Line
Protocol (DMTF compliant)

Remote control via Web browser
(without dedicated app)

Remote batch

Scheduling (without UPS)

Others
Set automatic IP address via DNS/DHCP

Remote wakeup
Wake On LAN, Wake On Ring

Centralized
management
Monitoring and control of multiple servers

Industry standard
IPMI
2.0
1Some setting items can only be changed.

SYSTEM CONFIGURATION GUIDE –NEC Express5800/B110d
NEC Corporation Revision 5.0 –January 16, 2014 15
OS Support Matrix for PCI Cards and Embedded Controllers
Part number
Product Name
WS 2012
WS 2008R2
WS 2008
WS 2008 x64
WS 2003R2
WS 2003R2 x64
RHEL 6
RHEL 6 x64
RHEL 5
RHEL 5 x64
N8403-057F
SATA Drive Cage Kit - Embedded SATA
non-RAID controller










N8403-057F
SATA Drive Cage Kit - Embedded SATA
RAID controller
-





-
-
-
-
N8403-059F
RAID Controller kit (512MB, RAID 0/1)










N8403-061
Dual Port 1GBASE Riser Card Kit










N8403-062
Dual Port 10GBASE Riser Card Kit










N8403-064
Dual Port 10GBASE Riser Card Kit
-









N8403-021
1000BASE-T(2ch) adapter
-









N8403-076F
Dual Port 1000BASE Adapter

-
-
-
-
-
-
-
-
-
N8403-022
1000BASE-T(4ch) adapter
-









N8403-077F
Quad Port 1000BASE Adapter

-
-
-
-
-
-
-
-
-
N8403-035
10GBASE-KR LAN interface card


-

-

-

-

N8403-065F
Dual Port 10GBASE Adapter


-

-

-

-

N8403-067F
Dual Port 10GBASE Adapter


-

-

-

-

N8403-072F
10Gb CNA Card 2Ch
-

-
-
-
-
-
-
-
-
N8403-018
Fibre Channel Controller(4Gbps/2ch)










N8403-034
Fibre Channel Controller(8Gbps/2ch)











SYSTEM CONFIGURATION GUIDE –NEC Express5800/B110d
NEC Corporation Revision 5.0 –January 16, 2014 16
Support Matrix for Adapters and Network Interconnect Devices
Network Adapter
Part number
Product Name
N8460-023 N8460-023A
N8406-044
N8406-029
N8406-036
N8406-051F
1Gb Intelligent L3 Switch
1/10Gb Intelligent L3 Switch
1Gb Pass-Through Card
10Gb Pass-Through Card
10Gb Intelligent L3 Switch
N8403-061F
Dual Port 1GBASE Riser Card Kit



2

N8403-062F
Dual Port 10GBASE Riser Card Kit





N8403-064F
Dual Port 10GBASE Riser Card Kit





N8403-065F
Dual Port 10GBASE Adapter





N8403-067F
Dual Port 10GBASE Adapter





N8403-021
1000BASE-T(2ch) adapter
1


2
-
N8403-076F
Dual Port 1000BASE Adapter
1


2
-
N8403-022
1000BASE-T(4ch) adapter



2
-
N8403-077F
Quad Port 1000BASE Adapter



2
-
N8403-035
10GBASE-KR LAN interface card
-
-
-


N8403-072F
10Gb CNA Card 2Ch
-
-
-

-
1Existing 1Gb Intelligent L3 Switch installed for embedded NIC can be shared with embedded NIC and the optional
NIC if N8406-013 1Gb Inter-link Expansion Card is installed in Blade Enclosure M system
2N8406-037 10GBASE-SR SFP+ module is not supported
Fibre Channel Controller
Part number
Product Name
N8406-040
N8406-021
N8406-020
N8406-042
N8406-030
8G FC switch (12 ports)
2/4G FC Pass-Through Card (12 port) 1
4G FC Switch (24port) 2
8G FC switch (24 ports) 2
2/4G FC Pass-Through Card (24 port) 2
N8403-018
Fibre Channel Controller(4Gbps/2ch)





N8403-034
Fibre Channel Controller(8Gbps/2ch)

-
-

-
1Supported for Blade Enclosure M only
2Supported for Blade Enclosure H v2 only

SYSTEM CONFIGURATION GUIDE –NEC Express5800/B110d
NEC Corporation Revision 5.0 –January 16, 2014 17
Supporting PCI Cards and Installable Slots
Part Number
Product Name
Slots
Slot # :
#1
#2
Slot type:
Type II
NIC
N8403-061F
Dual Port 1GBASE Riser Card Kit
-

N8403-062F
Dual Port 10GBASE Riser Card Kit
-

N8403-064F
Dual Port 10GBASE Riser Card Kit
-

N8403-065F
Dual Port 10GBASE Adapter

-
N8403-067F
Dual Port 10GBASE Adapter

-
N8403-021
1000BASE-T(2ch) adapter

-
N8403-022
1000BASE-T(4ch) adapter

-
N8403-035
10GBASE-KR LAN interface card

-
N8403-072F
10Gb CNA Card 2Ch

-
N8403-018
Fibre Channel Controller(4Gbps/2ch)

-
N8403-034
Fibre Channel Controller(8Gbps/2ch)

-

SYSTEM CONFIGURATION GUIDE –NEC Express5800/B110d
NEC Corporation Revision 5.0 –January 16, 2014 18
Copyright Notice and Liability Disclaimer
The information contained herein is subject to change without notice.
Microsoft and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries
Intel and Xeon are registered trademarks or trademarks of Intel Corporation or its subsidiaries in the United
States and other countries.
Linux is a trademark of Linus Torvalds.
Red Hat is a registered trademark of Red Hat, Inc. in the U.S.
All other products, brands, or trade names used in this document are trademarks or registered trademarks
of their respective holders.
NEC shall not be liable for technical or editorial errors or omissions contained herein.
For hard drive capacity measurements, 1 GB = 1 billion bytes.Actual formatted capacity is less.

SYSTEM CONFIGURATION GUIDE –NEC Express5800/B110d
NEC Corporation Revision 5.0 –January 16, 2014 19
Revision History
Revision
Date
Description
5.0
January 16, 2014
New products added:
8GB DDR3-1600 REG Memory Kit / N8402-155F
Discontinued products removed:
8GB DDR3-1600 REG Memory Kit / N8402-135F
4.0
July 17, 2013
New products added:
1.2TB 10K Hot Plug 2.5-inch SAS HDD / N8450-043
100GB Hot Plug 2.5-inch SATA SSD / N8450-705
400GB Hot Plug 2.5-inch SATA SSD / N8450-707
Dual Port 1000BASE Adapter / N8403-076F
Quad Port 1000BASE Adapter / N8403-077F
Discontinued products removed:
100GB Non-hot Plug 2.5-inch SATA SSD / N8450-703
3.0
January 18, 2013
Part number changed:
Trusted Platform Module Kit / N8415-002F
Others:
Add Windows Server 2012 to the list of operating system supported
Update OS support matrix
2.0
October 26, 2012
N8403-065F/067F Dual Port 10GBASE Adapter added.
N8403-072F 10Gb CNA Card added
1.0
June 26, 2012
Initial release