NEC NEC Express5800 Series User manual

NEC Express5800/BladeServer Series
■■■■■■■■
■■■■■■■■
■■■■■■■■
■■■■■■■■
■■■■■■■■
■■■■■■■■
■■■■■■■■
■■■■■■■■
■■■■■■■■
■■■■■■■■
■■■■■■■■
■■■■■■■■
NEC Express5800/120Ba-4
User's Guide

PROPRIETARY NOTICE AND LIABILITY DISCLAIMER
The information disclosed in this document, including all designs and related materials, is the
valuable property of NEC Computers International B.V. and /or its licensors. NEC and/or its
licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document,
including all design, manufacturing, reproduction, use, and sales rights thereto, except to the extent
said rights are expressly granted to others.
The NEC product(s) discussed in this document are warranted in accordance with the terms of the
Warranty Statement accompanying each product. However, actual performance of each such
product is dependent upon factors such as system configuration, customer data, and operator control.
Since implementation by customers of each product may vary, the suitability of specific product
configurations and applications must be determined by the customer and is not warranted by NEC.
To allow for design and specification improvements, the information in this document is subject to
change at any time, without notice. Reproduction of this document or portions thereof without prior
written approval of NEC is prohibited.
Rev 0.0 –April 2005
Copyright 2005
NEC Computers International B.V.
Nieuweweg 279
6603 BN Wijchen
The Netherlands
All Rights Reserved

Keep this User's Guide at hand for quick reference anytime it is necessary.
SAFETY INDICATIONS
Follow the instructions in this User's Guide to ensure your safety when using the server.
The server contains potentially dangerous components, and ignoring warnings may cause hazards to
happen. We recommend you take the preventive actions described in this manual.
Server components with possible danger are indicated with a warning label placed on or around
them as well as described in this User's Guide.
In the User's Guide or warning labels, "WARNING" or "CAUTION" is used to indicate a degree of
danger. These terms are defined as follows:
WARNING Indicates the presence of a hazard that may result in death or serious
personal injury if the instruction is ignored.
CAUTION Indicates the presence of a hazard that may cause minor personal injury,
including burns, or property damage if the instruction is ignored.
Precautions and notices against hazards are presented with one of the following three symbols. The
individual symbols are defined as follows:
This symbol indicates the presence of a hazard if the instruction is ignored.
An image in the symbol illustrates the hazard type. (Attention)
This symbol indicates prohibited actions. An image in the symbol illustrates a
particular prohibited action. (Prohibited Action)
This symbol indicates mandatory actions. An image in the symbol illustrates a
mandatory action to avoid a particular hazard. (Mandatory Action)
(Example) Symbol to draw attention
Term indicating a degree of danger
CAUTION
Hot surface
Immediately after the server is powered off, its internal components such as
hard disk drives are very hot. Leave the server until its internal components
fully cool down before installing/removing any component.
Symbol indicating a prohibited
action (may not always be
indicated)
Description of a danger

Symbols used in this User's Guide and warning labels are listed below.
Attentions
Indicates that improper use may cause an electric shock.
Indicates that improper use may cause personal injury.
Indicates that improper use may cause fingers to be caught.
Indicates that improper use may cause personal injury by the moving fan blades.
Indicates that improper use may cause fumes or fire.
Indicates a general notice or warning that cannot be specifically identified.
Prohibited Actions
Indicates a generic prohibited action that cannot be specifically identified.
Do not disassemble, repair, or modify the server. Otherwise, an electric shock or fire
may be caused.
Mandatory Action
Unplug the power cord of the server. Not doing so may cause an electric shock or fire.
Indicates a mandatory action that cannot be specifically identified. Make sure to follow
the instruction.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
CE Statement
Warning: This is a Class Aproduct. In domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures (EN55022).
BSMI Statement

Trademarks
NEC ESMPRO and NEC EXPRESSBUILDER are trademarks of NEC Corporation.
Microsoft, Windows, Windows Server, Windows NT, and MS-DOS are registered trademarks or trademarks of
Microsoft Corporation in the United States and other countries.
Intel and Pentium are registered trademarks of Intel Corporation.
Datalight is a registered trademark of Datalight, Inc.
ROM-DOS is a trademark of Datalight, Inc.
AT is a registered trademark of International Business Machines Corporation in the United States and other
countries.
AMI, MegaRAID, and Power Console Plus are registered trademarks or trademarks of LSI Logic Corp.
Adaptec and its logo is a registered trademark of Adaptec, Inc. of United States.
SCSISelect is a trademark ofAdaptec, Inc. of the United States.
Adobe, Adobe logo, and Acrobat are trademarks ofAdobe Systems Incorporated.
All other product, brand, or trade names used in this publication are the trademarks or registered trademarks of
their respective trademark owners.
Windows 2003 stands for Microsoft®Windows Server™2003 operating system and Microsoft®Windows
Server™2003 Standard Edition and Enterprise Edition. Windows XP stands for Microsoft®Windows®XP
Home Edition operating system and Microsoft®Windows®XP Professional operating system. Windows 2000
stands for Microsoft®Windows®2000 Server operating system and Microsoft®Windows®2000 Advanced
Server operating system, and Microsoft®Windows®2000 Professional operating system. Windows NT stands
for Microsoft®Windows NT®Server network operating system version 3.51/4.0 and Microsoft®Windows
NT®Workstation operating system version 3.51/4.0. Windows Me stands for Microsoft®Windows®
Millennium Edition Operating System. Windows 98 stands for Microsoft®Windows®98 operating system.
Windows 95 stands for Microsoft®Windows®95 operating system.
Momentary voltage drop prevention:
This product may be affected by a momentary voltage drop caused by lightning. To prevent such
momentary voltage drops, we recommend you use an AC uninterruptible power supply (UPS) unit.
Notes:
(1) No part of this manual may be reproduced in any form without the prior written permission of
NEC Corporation.
(2) The contents of this User's Guide may be revised without prior notice.
(3) The contents of this User's Guide shall not be copied or altered without the prior written
permission of NEC Corporation.
(4) All efforts have been made to ensure the accuracy of all information in this User's Guide. If
you notice any part unclear, incorrect, or omitted in this User's Guide, contact the sales agent
where you purchased this product.
(5) NEC assumes no liability arising from the use of this product, nor any liability for incidental or
consequential damages arising from the use of this User's Guide regardless of Item (4).

i
PREFACE
Congratulations on the purchase of your NEC Express5800/BladeServer.
The high density and power-efficient design of NEC Express5800/BladeServer result in savings for
the user both in power consumption and datacenter real estate costs.
Read this User's Guide thoroughly to fully understand handling of the server and appreciate its
functions to the maximum extent.

ii
ABOUT THIS USER'S GUIDE
This User's Guide is a guide describing the proper setup and use of the server.
This User's Guide also covers useful procedures for dealing with difficulties and problems that may
arise during setup or operation of the server.
Keep this manual for future use.
The following describes how to proceed with this User's Guide.
How to Use This User's Guide
To help you find information quickly, this User's Guide contains the following information:
Chapter 1 Notes on Using Your Server
includes information that needs attention to use the server. Make sure to read this chapter
before setting up and using the server. It also includes requirements and advisory
information for transfer and disposal of the server.
Chapter 2 General Description
includes information necessary to use the server, such as names and functions of its
components.
Chapter 3 Setting Up Your Server
tells you how to select a site, unpack the system, assemble the rack-mount subsystem,
make cable connections, and power on your system.
Chapter 4 Configuring Your Server
tells you how to configure the system and provides instructions for running the BIOS Setup
Utility and the Adaptec Configuration Utility, which is used to configure SCSI RAID drive in
your system. This chapter also provides information on mother board jumper settings.
Chapter 5 Installing the Operating System
describes how to install the operating system.
Chapter 6 Installing and Using Utilities
describes how to install the utilities for the server. It also includes a description on using the
attached "NEC EXPRESSBUILDER" CD-ROM.
Chapter 7 Maintenance
provides you with all the information necessary to maintain successful operation of the
server.
Chapter 8 Troubleshooting
contains helpful information for solving problems that might occur with your system.
Chapter 9 Upgrading Your Server
provides you with instructions for upgrading your system with an additional processor,
optional memory, optional add-in cards, hard disk drives, peripheral devices, and power
supply.
Appendix Specification
provides your server’s specifications.

iii
Text Conventions
The following conventions are used throughout this User's Guide. For safety symbols, see
"SAFETY INDICATIONS" provided earlier.
IMPORTANT: Items that are mandatory or require attention when using the server
NOTE: Helpful and convenient piece of information
IN THE PACKAGE
The carton contains various accessories, as well as the server itself. Refer to the packing list to make
sure that you have everything and that individual components are not damaged. If you find any
component missing or damaged, contact your service representative.
Store the provided accessories in a designated place for your convenience. You will need
them to install an optional device or troubleshoot the server, as well as to set it up.
Make a backup copy of each provided floppy disk, if any. Store the original disk as the
master disk in a designated place, and use its copy.
Improper use of any provided floppy disk or CD-ROM may alter your system
environment. If you find anything unclear, immediately ask your service representative for
help.

iv
CONTENTS
PREFACE.........................................................................................................................................i
About This User's Guide..................................................................................................................ii
In the Package................................................................................................................................ iii
Chapter 1 ...........................................................................................................................1-1
Notes on Using Your Server ............................................................................................1-1
Warning Labels............................................................................................................................ 1-1
Safety Notes................................................................................................................................. 1-2
For Proper Operation ................................................................................................................... 1-5
Transfer to Third Party................................................................................................................. 1-7
Disposal and Consumables .......................................................................................................... 1-8
User Support................................................................................................................................ 1-9
Chapter 2 ...........................................................................................................................2-1
General Description..........................................................................................................2-1
Overview...................................................................................................................................... 2-2
Standard Features......................................................................................................................... 2-3
Part Names and Controls ............................................................................................................. 2-4
CPU Blade............................................................................................................................... 2-4
Hard Disk Drive ...................................................................................................................... 2-8
Lamp Indications..................................................................................................................... 2-9
Using Your Server...................................................................................................................... 2-14
Powering on the Blade Server ............................................................................................... 2-14
Powering-off of Blade Server................................................................................................ 2-17
POST..................................................................................................................................... 2-18
Device Identification ............................................................................................................. 2-21
Chapter 3 ...........................................................................................................................3-1
Setting Up Your Server.....................................................................................................3-1
Setup Flow................................................................................................................................... 3-2
Anti-static Measures .................................................................................................................... 3-3
Selecting a Site............................................................................................................................. 3-4
Unpacking the System ................................................................................................................. 3-6
Installing the Blade Assembly Unit ............................................................................................. 3-7
Installing the CPU Blade ............................................................................................................. 3-8
Check of the MAC Address..................................................................................................... 3-8
Installing the Hard Disk Drive..................................................................................................... 3-9
Making Connections.................................................................................................................. 3-10
CPU Blade..............................................................................................................................3-11
Network................................................................................................................................. 3-12
Electric Power ....................................................................................................................... 3-13

v
Configuring the RAID Drive (HostRAID) .................................................................................3-15
Overview of HostRAID .........................................................................................................3-15
Notes ......................................................................................................................................3-16
HostRAID Setup Flow...........................................................................................................3-17
Installing the Operating System..................................................................................................3-18
Installing Utilities.......................................................................................................................3-18
Making Backup Copies of System Information..........................................................................3-18
Chapter 4........................................................................................................................... 4-1
Configuring Your Server.................................................................................................. 4-1
System BIOS ~ SETUP ~.............................................................................................................4-1
Starting SETUP Utility.............................................................................................................4-2
Description on On-Screen Items and Key Usage.....................................................................4-3
Configuration Examples...........................................................................................................4-4
Menu and Parameter Descriptions ...........................................................................................4-7
Disk array BIOS - SCSISelect/HostRAID -................................................................................4-27
RAID (Redundant Array of Independent Disks)....................................................................4-27
Using SCSISelect Menu.........................................................................................................4-27
Starting SCSISelect ................................................................................................................4-28
Displaying Array....................................................................................................................4-31
Terminating SCSISelect .........................................................................................................4-31
Creating Array........................................................................................................................4-32
Deleting Array........................................................................................................................4-40
Setting Bootable Array System ..............................................................................................4-41
Add-in Card's BIOS....................................................................................................................4-42
Configuring Mother Board Jumpers...........................................................................................4-43
Chapter 5........................................................................................................................... 5-1
Installing the Operating System...................................................................................... 5-1
Setup and Re-setup of CPU Blade on the Diskless Model...........................................................5-1
Setup using DeploymentManager ............................................................................................5-1
Local Installation......................................................................................................................5-2
Terminal Service.........................................................................................................................5-14
Installation of Terminal Service in CPU Blade ......................................................................5-14
Share of Client Module in Terminal Service..........................................................................5-16
Terminal Service Client..........................................................................................................5-18
Chapter 6........................................................................................................................... 6-1
Installing and Using Utilities ........................................................................................... 6-1
NEC EXPRESSBUILDER...........................................................................................................6-2
NEC EXPRESSBUILDER for DOS-Based with Local Console.............................................6-4
DOS-based NEC EXPRESSBUILDER with Remote Console................................................6-7
Starting.....................................................................................................................................6-8
Windows-Based NEC EXPRESSBUILDER (Master Control Menu) ...................................6-10

vi
Adaptec Storage Manager - Browser Edition .............................................................................6-11
Features ..................................................................................................................................6-11
Setting up ASMBE by DeploymentManager......................................................................... 6-12
NEC ESMPRO .......................................................................................................................... 6-13
DeploymentManager.................................................................................................................. 6-14
Installation of DeploymentManager...................................................................................... 6-14
Feature of DeploymentManager............................................................................................ 6-15
NEC DianaScope....................................................................................................................... 6-16
Chapter 7 ...........................................................................................................................7-1
Maintenance......................................................................................................................7-1
Making Backup Copies................................................................................................................ 7-1
SYSTEM DIAGNOSTICS.......................................................................................................... 7-2
Test Items................................................................................................................................. 7-2
Starting and Ending the System Diagnostics........................................................................... 7-3
Chapter 8 ...........................................................................................................................8-1
Troubleshooting................................................................................................................8-1
System Viewers............................................................................................................................ 8-2
Lamps .......................................................................................................................................... 8-3
Error Messages ............................................................................................................................ 8-4
Error Messages after Power-on ............................................................................................... 8-4
POST Error Messages .............................................................................................................8-5
Solving Problems......................................................................................................................... 8-9
CPU Blade............................................................................................................................... 8-9
Problems with NEC EXPRESSBUILDER............................................................................ 8-15
Problems with Master Control Menu .................................................................................... 8-15
Problem with Disk Array Configuration................................................................................ 8-16
Collecting Event Log................................................................................................................. 8-17
Collecting Configuration Information........................................................................................ 8-18
Collecting Dr. Watson Diagnostic Information.......................................................................... 8-19
Memory Dump........................................................................................................................... 8-19
Recovery for Windows System.................................................................................................. 8-20
Off-Line Maintenance Utility ....................................................................................................8-23
Starting the Off-line Maintenance Utility.............................................................................. 8-23
Features of Off-line Maintenance Utility............................................................................... 8-24
Resetting the Server................................................................................................................... 8-25
Forced Shutdown....................................................................................................................... 8-26
Chapter 9 ...........................................................................................................................9-1
Upgrading Your Server.....................................................................................................9-1
Safety Notes................................................................................................................................. 9-2
Anti-static Measures .................................................................................................................... 9-3
Preparation for Installation .......................................................................................................... 9-4

vii
Installation/Removal Procedure....................................................................................................9-5
Processor (CPU).......................................................................................................................9-5
DIMM ....................................................................................................................................9-14
Expansion Slot Card...............................................................................................................9-18
Hard Disk Drive.....................................................................................................................9-25
Appendix ...........................................................................................................................A-1
Specifications ...................................................................................................................A-1

viii
(This page is intentionally left blank.)

Chapter 1
Notes on Using Your Server
This chapter includes information necessary for proper and safe operation of the server.
WARNING LABELS
The warning label is attached to components with possible danger or their vicinity in the server to
inform the user that a hazardous situation may arise when operating the server. (Do not intentionally
remove or damage any of the labels.)
If you find any labels totally/partially removed or illegible due to damage, contact your sales
representative.

1-2 Notes on Using Your Server
SAFETY NOTES
This section provides notes on using the server safely. Read this section carefully to ensure proper
and safe use of the server. For symbols, see "SAFETY INDICATIONS" provided earlier.
WARNING
Do not use the server for services where critical high availability may directly
affect human lives.
The server is not intended to be used with or control facilities or devices
concerning human lives, including medical devices, nuclear facilities and
devices, aeronautics and space devices, transportation facilities and devices;
and facilities and devices requiring high reliability. NEC assumes no liability for
any accident resulting in personal injury, death, or property damage if the
server has been used in the above conditions.
Do not disassemble, repair, or alter the server.
Never attempt to disassemble, repair, or alter the server on any occasion other
than described in this User's Guide. Failure to follow this instruction may cause
an electric shock or fire as well as malfunctions of the server.
Do not remove the lithium battery.
The server contains the lithium battery. Do not remove the battery. Placing
lithium close to a fire or in the water may cause an explosion.
When the server does not operate appropriately because the lithium battery’s
life is over, contact your service representative. Do not disassemble the server
to replace or recharge the battery by yourself.
Do not use the server if any smoke, odor, or noise is present.
If smoke, odor, or noise is present, immediately turn off the system and
disconnect the power plug from the outlet, then contact your service
representative. Using the server in such conditions may cause a fire.
Keep needles or metal objects away from the server.
Do not insert needles or metal objects into ventilation holes in the server. Doing
so may cause an electric shock.
Use the devices only in the specified areas.
CPU blades and hard disk drives should be installed in the dedicated Blade
Assembly Unit for their uses. Do not install the CPU blades and hard disk drives
in a chassis other than the Blade Assembly Unit. Failure to follow this advice
may result in fire and/or electric shock to occur.

Notes on Using Your Server 1-3
WARNING
Do not handle the CPU blade once it is installed in the Blade Assembly Unit.
To install or remove an option from the CPU blade, first power off the CPU
blade and remove the CPU blade from the Blade Assembly Unit. If you touch
parts on the CPU blade with it connected to the Blade Assembly Unit, you may
receive an electric shock.
Do not install or remove more than one CPU blade at a time.
Install or remove CPU blades one by one. If you install or remove more than
one CPU blade at a time or a CPU blade with the cover of another slot
removed, you may receive an electric shock.
Do not use the equipment in the place where corrosive gases exist.
Make sure not to locate or use the server in the place where corrosive gases
(sulfur dioxide, hydrogen sulfide, nitrogen dioxide, chlorine, ammonia, ozone,
etc) exist.
Also, do not set it in the environment where the air (or dust) includes
components accelerating corrosion (ex. sulfur, sodium chloride) or conductive
metals. There is a risk of a fire due to corrosion and short-circuits on the
internal printed board.
CAUTION
Keep water or foreign matter away from the CPU blade.
Do not let any form of liquid (water etc.) or foreign matter (e.g., pins or paper
clips) enter the server. Failure to follow this warning may cause an electric
shock, a fire, or a failure of the server. When such things accidentally enter the
server, immediately turn off the power and disconnect the power plug from the
outlet. Do not disassemble the server. Contact your service representative.
Make sure to complete device installation.
Always install a CPU blade, hard disk drive and board firmly. An incompletely
installed device may cause a contact failure, resulting in smoking or fire.
Do not use any unauthorized interface cable.
Use only interface cables provided by NEC and locate a proper device and
connector before connecting a cable. Using an authorized cable or connecting
a cable to an improper destination may cause a short circuit, resulting in a fire.
Also, observe the following notes on using and connecting an interface cable.
Do not use a damaged cable connector.
Do not step on the cable.
Do not place an object on the cable.
Do not use the Blade Assembly Unit with loose cable connections.

1-4 Notes on Using Your Server
CAUTION
Do not touch the fan blades when they are moving.
Keep your hand or hair away from the cooling fans on the front and rear of the
Blade Assembly Unit. Failure to follow this warning may get your hand or hair
caught in the fan, resulting in injury.
Avoid installation in extreme temperature conditions.
Immediately after the server is powered off, its internal components such as
hard disk drives are very hot. Leave the server until its internal components
fully cool down before installing/removing any component.
Avoid contact with the server during thunderstorms.
Disconnect the power plug from the outlet when a thunderstorm is approaching.
If it starts thundering before you disconnect the power plug, do not touch any
part of the server, including the cables. Failure to follow this warning may cause
a fire or an electric shock.
Keep animals away from the server.
The animal’s excrements or fur may enter the CPU blade and cause a fire or
electric shock.
Do not use a cellular phone or pager around the server.
Turn off the cellular phone or pager. Radio interference may cause
malfunctions of the server.