NEC Speed Wi-Fi NEXT WX05 User manual

Preparing for Setup
Preparing for Setup (Continued)
Preface
Thank you for buying the Speed Wi-Fi NEXT WX05 (simply called the "product" from here on).
Before using the product, be sure to read the "Setup Guide" (this manual) and the "Notes on usage" to ensure
correct use.
List of Packaged Items
Before you start using the product, make sure that you have all the following items packaged
with the product.
□Speed Wi-Fi NEXT WX05 (main unit)
□Battery pack (NAD34UAA)
□Rear cover
□USB2.0 TypeC-A cable (sample)(GXE-000771)
Use this to connect the product to a PC.
□つなぎかたガイド
"Setup Guide" (Japanese)
□ご利用にあたっての注意事項（保証書付）
"Notes on usage" (with warranty) (Japanese)
About the Instruction Manual
The "Setup Guide" (this manual) explains only the main operations and settings of the main functions for using
this product. As an instruction manual related to the product, the "Setup Guide" (this manual), the "Notes
on usage", and the " 取扱説明書 詳細版 (Full Instruction Manual)" (Japanese) are available for download from
the WiMAX Support Information website. In this manual, all such manuals are collectively referred to as the
"Instruction Manual".
• A PDF version of the " 取扱説明書 詳細版 (Full Instruction Manual)" (Japanese), in which the explanations of
various functions are described in detail, is also included with this product.
Connect the product to a PC or the like by means of wireless LAN (Wi-Fi®) or a USB2.0 TypeC-A cable, launch
the web browser, type "http://192.168.179.1" in the address field and log in to the Advanced Settings on
Quick Setting Web to view [ 情報 (Information)], and access [ マニュアル (Manual)].
( Refer to "Launch Quick Setting Web" in " Configuring the Connection Destination Connecting Wide
Area Network (WAN)" on the next page of this manual.)
• The PDF versions of the "Instruction Manual" can be downloaded from the WiMAX
Support Information website.
https://www.necplatforms.co.jp/support/wimax/wx05/index.html
About the Notations in This Manual
■Notes on Illustrations / Screenshots
• The screenshots and methods of operation in this manual are those when an au Nano IC Card 04 LE U is
inserted.
• The illustrations and screenshots in this manual are simplified and may look different from the actual
illustrations and screens. Also, a part of a screen may be omitted.
• This manual uses the display of the body color "Sonic Red" to explain examples.
• In this manual, the "au Nano IC Card 04 LE U" is referred to as an "au IC card".
• In this manual, the "USB2.0 TypeC-A cable" provided in the package is referred to as a "USB cable".
• Company names and product names referred to in this manual are trademarks or registered trademarks of
their respective companies. TM and the®mark may be omitted in this manual.
Before using the product
• The product can transmit data by using the WiMAX 2+ system or the LTE system. You can select from the
following communication modes to use this.
High Speed High Speed Plus Area
WiMAX 2+ 〇 〇
LTE － 〇
For an explanation of how to select and set the communication modes, see "About Communication
Modes" on the next page of this manual.
*The default setting is "High Speed" mode. Note that an additional charge may be incurred, depending on your billing plan,
when you switch to "High Speed Plus Area" mode.
• The product supports USB 2.0 (except for USB ports that are proprietary to computer manufacturers) and can
be used on computers that are equipped with these ports.
(The USB cable provided in the package complies to the USB 2.0 standard.)
* Keep the packaged items, including the warranty, in a safe place.
* An AC adapter is not included. Purchase the specified charging
equipment (sold separately). For details, see "Related Accessories" in
"Notes on usage".
* The illustrations of the product used in this manual are simulated
images. They may differ from the actual product.
How to Use the Touch Panel
This product is equipped with an intuitively operable touch panel. It operates by detecting your
nger's movements using a capacitive sensing method.
• The touch panel is designed to be operated by lightly touching it with your fingers.
Do not apply strong pressure with your fingers or sharp-pointed objects (such as fingernails, ballpoint
pens and pins) on the touch panel.
• In the following cases, the product may not respond to touching the touch panel. Or, doing so might
cause false operation.
– Operation with gloved hands
– Operation with fingernails
– Operation with a foreign object placed on the
touch panel
– Operation with a protective sheet or sticker
on the touch panel
– Operating with drops of water or condensation on
the touch panel
– Operation with wet or sweaty fingers
– Operating with two or more fingers
◆Tap
Lightly touch the touch panel, and then remove
your finger.
If you tap too briefly, there may be no reaction.
◆Slide
Put your finger lightly on the touch panel and then
slide your finger.
• If the lock screen is displayed, unlock it by
sliding the lock mark to unlock it. The
home screen is displayed.
• To return to the home screen, tap the
button.
Inserting the au IC Card
When inserting the au IC Card, be sure to disconnect the product from the power source
and turn o the power to the product.
Remove the USB cable and cradle (sold separately) if they are connected.
1Slide the clasp (cover) on the card slot in the direction
of the arrow to release the lock and lift up the card
slot. With the IC (metal) part of the au IC card facing
up, insert it straight into the card slot.
* Be careful of the orientation of the notch.
* Do not press on the clasp from above.
2Push the card slot down, and lock it by sliding it in
the direction of the arrow, while lightly pressing the
top of the clasp, until you hear a click.
* Your telephone number and other details are stored on
the au IC card.
* This product supports au Nano IC Card 04 LE U.
* Data communication via a Wide Area Network (WAN)
cannot be done if the au IC card is not inserted.
* Confirm the correct inserting direction of the IC card. Failure
to do so might cause a malfunction or damage.
* Do not place the IC card directly on the connectors in
the bottom of the card slot. Doing so might cause a
malfunction or damage.
* Do not insert or push the IC card forcefully. Doing so might
cause a malfunction or damage.
If something feels strange, return the card slot temporarily and lock it again.
* Refrain from inserting an SD card or IC card with a conversion adapter. Doing so might cause failures.
* Be careful not to touch or damage the IC (metal) part of the au IC card.
* An error message is displayed if the au IC card is not properly inserted, or if there is an abnormality with the au IC card.
* Be careful not to lose the au IC card after you remove it.
• You can confirm the product's device information (phone number, ICCID, etc.) on its display (touch panel).
<How to conrm>: Home screen - [Information] - [Device Information]
Notch
Front
au Nano IC Card 04 LE U
Back
IC (metal) part
IC (metal) part
SIM card slot
Notch
Attaching the Battery Pack
1Slide the battery pack, with the marked surface
(recycling symbol, etc.) facing up, all the way in.
Align the product's terminals and the battery pack's
(terminals), attach them in the direction of ①,
and then insert it in the direction of ②.
* Use the battery pack specified for this product.
<Removing the battery pack>
Lift up the front part of the battery pack and pull it
out in the direction of the arrow to remove it.
2Attach the rear cover.
Check the direction of the rear cover and place it so that it aligns with the product. While firmly
pressing the parts in the following illustration, attach the rear cover so that there are no
gaps.
Charging the Product
This section explains how to charge the product using the specied TypeC Common AC Adapter
01 U (0601PQV) (sold separately).
* The battery pack is not fully charged at the time of purchase. Be sure to charge the battery before using the product.
* We recommend charging this product while the power is off or while it is idling.
* If the power is on, or if the temperature of the product or battery pack is high, charging may stop, even if the battery
is not full, in order to maintain the battery's life. Also, if you continue charging it for a long time while the power is on,
the battery enters the Long Life Charge state (the maximum charge capacity is about 70%) and the remaining battery
power is automatically reduced gradually to protect the battery.
* The charging time varies depending on the environment and conditions in which the product is used.
Fast charging is possible if you are using a typeC Common AC Adapter 01 U (0601PQV) (sold separately).
For the time it takes to charge, refer to the "Product Specifications" section on the next page.
1
Insert the USB connector (type C) of the AC adapter (sold separately) into the USB port (type C) on the
product.
* Plug the USB connector (type C) straight into the USB port (type C) of the product.
2Plug the power plug of the AC adapter (sold
separately) into a power outlet.
* Make sure that the AC adapter (sold separately) does not
come unplugged.
* Pressing the Power button when charging with the
power off or while idling shows how much of the battery
has been charged (%).
* Because the battery pack is initializing when being used
for the first time after attaching it, showing how much
of the battery has been charged may take some time.
* If you turn on "Long Life Charge", charging stops when the battery's level is about 70%. Repeatedly charging and
discharging the battery pack frequently while it has sufficient remaining power prevents accelerated deterioration of
the battery pack. (Default setting: OFF)
• Display procedure: In the home screen, tap [Quick Menu] - [ECO Settings] - [Long Life Charge].
For information on how to charge the battery pack on the cradle (sold separately), refer to the "WX05 ク
レードル (NAD35PUU) 取扱説明書 (Instruction Manual of the cradle)" (Japanese).
Turning the Power On
1
Hold down the Power button until "NEC" is displayed in the display and the product is turned on.
(The remaining battery level appears while "NEC" is displayed immediately after you install a battery pack and when
you turn on the power after the power was fully off.)
* When the home screen (refer to "Displayed Information" on the next page) is displayed, proceed to .
*To turn the power off, hold down the Power button
and tap [Power OFF] on the Power Option screen.
(The power can be turned off, even on the lock screen, by
holding down the Power button .)
2When the language selection screen is displayed, tap [English].
Switching to English display
From the home screen, tap [ 設定 (Settings)] →[メンテナンス (Maintenance)] → [ 言語設定 (Language)] →[English].
3Read the guidelines for the "Notes on usage" by sliding them to the
bottom, and then tap [YES].
4Read the guidelines for the "Favor on usage" by sliding them to the
bottom, and if you agree, tap [YES].
5When "Do you want to start Setup Wizard?" is displayed, continue to
by tapping [YES].
Terminals
Recycling
symbol
(Terminals)
Notch
Press the parts rmly and securely to attach the rear cover.
Power button
Notch Align the
tabs on this
side rst.
Verifying the Connection Status
◆
If is displayed along with in the display and the product can be connected to the internet, the settings are complete.
* For an explanation of each icon, see "Displayed Information" on the
next page of this manual.
appears in High Speed Plus Area mode, and (green)
appears in Onetime HS+A mode.
For details, see "About Communication Modes" on the next page
of this manual.
◆If is displayed along with in the display and the product cannot be connected to the internet,
Congure the connection destination in .
◆If the wireless LAN (Wi-Fi®) connection with the product is not established,
Select [OFF] on the home screen - [Settings] - [LAN Settings] - [Wi-Fi Management Frame], and then redo the
wireless LAN (Wi-Fi®) connection using (or ).
◆If "Please checking APN settings." is displayed,
Congure the connection destination in .
Conrm that this product has the latest rmware. (How to conrm: Home screen ‑ [Settings] ‑ [Maintenance] ‑ [Firmware Update])
The version of this product is confirmed via the display (touch panel). (How to confirm: Home screen - [Information] - [Device Information] - "Firmware Version")
When“There is new firmware available. Do you want to update?”is displayed on the display of this product, it indicates that a new firmware exists. In that case, refer to
the“Updating the Firmware”on the next page of this manual to update the version.
NWA-A07669-001-00
Technically Certified
November, 2018
Instruction Manual
Read this to connect and configure the product
Part Names and Functions
Name Function
①
Display
(Touch panel) Lets you view the status of this product and notification
information.
Main settings for the product can
be done with the touch panel.
②USB port (type C) Used to connect the USB cable
(packaged item) (sample) to
the product, or when placing
the product on the cradle (sold
separately).
③
Power button Turns the power on/off.
Use to turn on/off the display.
Use to put the product in an idle
state, or to recover from idling or
waiting.
④SIM card slot Insert the au IC card into this slot.
⑤Strap hole Used to attach a strap.
①Display (Touch panel)
③Power button
④SIM card slot
⑤Strap hole
②USB port (type C)
• The antenna is built-in. Covering the product with
your hand during communication may affect the
communication quality.
Connecting to Wireless LAN (Wi-Fi®)
Downloading the "NEC WiMAX 2+ Tool" Application for Your Smartphone
By using "NEC WiMAX 2+ Tool", an application designed especially for this product, it is possible to
view information about the product on your smartphone, etc. and perform operations to update
the rmware or switch to the idle state.
* This specialized application enables remote-activation. Search the Google Play or App Store for "NEC
WiMAX 2+ Tool" to download and install this specialized application.
<Google Play Store> <App Store>
(As of September, 2018)
* The "NEC WiMAX 2+ Tool" smartphone application has a Japanese user
interface.
* Settings cannot be done on this product with "NEC WiMAX 2+ Tool" while the
display (touch panel) is on. In addition, operating the product's display (touch
panel) while doing settings via "NEC WiMAX 2+ Tool" may interrupt the settings
being done with "NEC WiMAX 2+ Tool". Change the display to the home screen
or open the lock screen.
* You can use "NEC WiMAX 2+ Tool" to connect to a wireless LAN (Wi-Fi®).
(Refer to " Using a QR Code to Connect to Wireless LAN (Wi-Fi®)"
on the next page)
Data communication can be performed with this product by connecting wireless LAN (Wi-Fi®) devices such as a PC, game console,
smartphone, etc.
Up to 10 wireless LAN (Wi-Fi®) devices can be connected to this product.
However, depending on the ambient reception environment, the number of connected devices may not reach the limit.
* The wireless LAN (Wi-Fi®) function and the Bluetooth®function (on the next page) cannot be used simultaneously.
Using the Wi‑Fi Settings Moving Function
You can carry over to the product the settings for a wireless LAN (Wi-Fi®) router that you used in the past by using the "Wi-Fi Settings Moving" function. This way you do not need to redo the settings.
* The router you have used in the past needs to have supported WPS. In addition, some of the wireless LAN (Wi-Fi®) settings may not carry over, depending on the functions and settings (such as unusable text or encryption mode) of the router you were
using in the past.
* In the home screen, tapping [Settings] - [Easy Wireless Settings] - [Wi-Fi Settings Moving] shows a guidance screen.
You can conrm if the "SSID(Primary)" is the SSID of the router you have used until now,
by going to home screen - [Information] - [Wi-Fi Information].
[For Windows PCs]
The following is explained using Windows 10 as an example.
2Turn the PC on and enable wireless functions.
* Refer to the user manual, etc., for your PC
for how to connect.
3From your PC's network (Wi-Fi®) screen,
select the network name (SSID) that
was displayed in step 1,select " 自動
的に接続 (Connect automatically)",and
then click [ 接続 (Connect)].
4
"Please tap the Next Button after starting WPS. SSID: xxxxxx" is displayed on the product's display (touch
panel). Tap [Next].
5If "If you tap WPS Button, then Setup
starts." is displayed, tap [WPS].
A little while after "WPS is in progress…"
is displayed, "Connection succeeded." is
displayed. Tap [Exit].
If the product cannot connect to the PC, "Connection failed." is displayed. Check that the PC's wireless function is enabled,
and then retry from step 1.
[For smartphones/tablets (Android devices)]
* Refer to the user manual, etc., for your Android device for how to connect.
2Turn on your Android device, select from its home screen [Settings] - [Network & Internet] - [Wi-Fi],
and put it in list view.
3
From the Wi-Fi screen of your Android
device, tap
[Wi-Fi preferences] - [Advanced] -
[WPS Push Button].
* This screen is an example using Android 8.1.
4
"Please tap the Next Button after starting
WPS. SSID: xxxxxx" is displayed on the
product's display (touch panel). Tap
[Next].
5If "If you tap WPS Button, then Setup
starts." is displayed, tap [WPS].
A little while after "WPS is in
progress…" is displayed, "Connection
succeeded." is displayed. Tap [Exit].
If the product cannot connect to the Android device, "Connection failed." is displayed. Check that the Android device's
wireless LAN (Wi-Fi®) function is enabled, and then retry from step 1.
Read the guidelines for the "Wi-Fi Settings Moving" function
by sliding them to the bottom, and then tap [YES].
In the home screen, tap [Settings]. Tap [Setup Wizard]. Tap [Wi-Fi Settings Moving].
Tap [YES] in the settings conrmation
screen for the Wi-Fi device.
Tap [YES].
Tap [Exit] in the settings successful screen.
Turn o the power to the router you were using previously.
Tap [YES] in the nd router screen.
Start up the WPS function
of the router you were using
previously.
(Refer to the user manual for
the router you are using for
the method to start up the
WPS function.)
• About [Manual connection]: Refer to " To Do Wireless LAN
(Wi-Fi®) Connections via Manual Settings" if you are manually setting a
Mac OS computer or iPad/iPhone/iPod touch, etc.
1Tapping [WPS] on the Setup Wizard shows the screen on the left.
If you are doing settings from the home screen, tapping [Settings] - [Easy
Wireless Settings] - [WPS] shows the network name (SSID).
Tap [WPS].
Tap [Next].
Tap [OK].
* This screen is an example.
The home screen is displayed.The Setup Wizard is complete.
[YES]
[NO]
(Screen from )
You can redo the Setup Wizard from the home screen [Settings] - [Setup
Wizard].
Use the WPS Function to Connect to Wireless LAN (Wi‑Fi®).
If the wireless LAN (Wi-Fi®) device supports the push-button format of the WPS function, you can easily do the setup without having to input the SSID, security methods and other settings needed to
connect.
This section explains how to connect to wireless LAN (Wi-Fi®) using a Windows PC and Android device as examples.
WAN
The product
Wireless LAN
(Wi-Fi®) Smartphone
PC, game
console, etc.
Select how to connect the product
with a wireless LAN (Wi-Fi®) terminal
to set up the wireless LAN (Wi-Fi®).

To DoWireless LAN (Wi-Fi®) Connections via Manual Settings
Displayed Information
Initialization Method
When the product is not operating properly, or to bring back the default settings, perform
initialization by following the steps below. (This will delete all user settings and the screen
display will change to Japanese.)
1Open the home screen on the product's display (touch panel).
2From the home screen tap [Settings] - [Maintenance] - [Initialize].
3Once the message "Restoring to the initial settings. Do you want to initialize this device?" is displayed
on the product's display (touch panel), tap [YES].
4Initialization will be completed once the product has been reactivated.
Name Indicator State Explanation
①Reception level Lit Indicates the signal strength of Wide Area Network (WAN) in 4 levels
Lit Indicates that the product is out of the service area
②Connection status Lit Indicates that the product is connected to the internet in High Speed mode Displayed when
communicating
When sending
When receiving
Lit Indicates that the product is connected to the internet in High Speed Plus Area mode(*)
Lit (green) Indicates that the product is connected to the internet in Onetime HS+A mode(*)
Lit Indicates that the product is connected to the cradle (sold separately) inWi-Fi Access Point Mode
③Firmware update notication Lit (blue) Indicates that new rmware has been released and an update is required
④Status of wired connection Lit Indicates that LAN is connected via USB
Lit Indicates that the product is connected to the cradle (sold separately) and wired LAN
⑤Status of Bluetooth® function Lit Indicates that Bluetooth® is on (the number on the lower right indicates the number of connected devices)
O Indicates that Bluetooth® is o
⑥Wireless LAN (Wi-Fi®)
bandwidth Lit Indicates that the product is connected to the 2.4 GHz bandwidth (the number on the lower right indicates
the number of connected devices)
Lit Indicates that the product is connected to the 5 GHz bandwidth (outdoors) (the number on the lower right
indicates the number of connected devices)
Blinking Indicates that the product is conrming the channel that is in use
Lit Indicates that the product is connected to the 5 GHz bandwidth (indoors) (the number on the lower right
indicates the number of connected devices)
⑦Schedule Lit Indicates that the Schedule function is set
Lit (orange) Indicates that the Schedule function is set and there is less than 10 minutes to power o
⑧Energy-Saving mode Lit (green) Indicates that the product is running in Eco mode
Lit (green) Indicates that the product is saving energy when the remaining battery level is low in Normal mode
Lit Indicates that the product is running in Normal mode
Lit Indicates that the product is running in High Performance mode
⑨Battery status Lit*1Indicates the remaining battery level on a scale of 6 levels
Lit*1Indicates that the battery is being charged
⑩Displaying data usage Indicates the current data usage (value of data usage accumulated/value of set upper limits)
The length of the bar indicates the proportion used
* A separate designated additional charge may be incurred when using High Speed Plus Area mode or Onetime HS+A mode.
*1: Green when "Long Life Charge" is on.
Updating the Firmware
Follow the steps listed below to update the rmware.
1Open the home screen on the product's display (touch panel).
2Once the message "There is new firmware available. Do you want to
update?" is displayed on the product's display (touch panel), tap [YES].
3"Now updating the rmware... Please do not remove the battery pack."
is displayed while the update is processing.
4When the update is complete, the product automatically reactivates
and the home screen appears on the display.
Firmware cannot be updated when the product is connected to the cradle (sold separately) and used in Wi-Fi Access Point
Mode. Update the rmware when the product is removed from the cradle (sold separately) and "Access Point Mode" is set to
"Disable".
<Settings menu screen>
■Aterm is a registered trademark of NEC Corporation. ■らくらく無線スタート and らくらく QR スタート are registered trademarks of NEC Platforms, Ltd. ■Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. ■Mac, Macintosh, Mac OS, macOS, OS X, iPad,
iPhone and iPod touch are trademarks of Apple Inc. registered in the United States and/or other countries. App Store is a service mark of Apple Inc. ■The iPhone trademark is used under license from Aiphone Co., Ltd. ■Internet Explorer is a trademark or registered trademark of Microsoft Corporation in the
United States and/or other countries. ■Google, Android, Google Chrome, and Google Play are trademarks or registered trademarks of Google LLC. ■Bluetooth and the Bluetooth logo are trademarks registered to Bluetooth SIG, Inc., and are being used under license. ■"QR Code" is a registered trademark of
DENSO WAVE INCORPORATED. ■Other company names, brand names, service names and so on are trademarks or registered trademarks of their respective owners. TM and the ®mark may be omitted in this manual.
© NEC Platforms, Ltd. 2018 This manual may not be duplicated or altered, or duplicate copies of the manual distributed, without prior written permission from NEC Platforms, Ltd. November, 2018, 1st Edition Sold by:KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY
Manufactured by: NEC Platforms, Ltd.
<Settings message display>
This is displayed while doing settings for the product.
<Collective Settings screen>
<Quick Menu screen>
•[Firmware Update] is displayed when there is a new
firmware update.
•[Onetime HS+A] is not displayed when the
Communication Mode is High Speed Plus Area mode.
This product can be used on OSs, such as Windows®, Macintosh,
and Linux, that comply with the TCP/IP protocol stack (use limited
to Japanese versions of the OS).
However, the following OSs are supported during USB connection.
Windows® 10, Windows® 8.1, Windows® 7 (SP1 and later) Japanese
version, 32 bit (x86) version and/or 64 bit (x64) version, and macOS
High Sierra v10.13 (Intel), Sierra v10.12 (Intel), OS X v10.11 (Intel),
v10.10 (Intel), v10.9 (Intel), v10.8 (Intel), Mac OS X, v10.7 (Intel),
v10.6 (Intel), v10.5 (Intel) Japanese versions.
The following web browsers are available when performing
settings in Quick Setting Web.
Also, the supported products include the following OS pre-
installed products, or products which are guaranteed by
manufacturers to use with the following OSs. (Self-made
computers are not supported.) (As of September, 2018)
Windows® 10 supporting:
• Microsoft Edge
• Internet Explorer 11.0
Windows® 8.1 supporting:
• Internet Explorer 11.0
Windows® 7 (SP1 and later) supporting:
• Internet Explorer 8.0/9.0/10.0/11.0
macOS High Sierra v10.13/Sierra v10.12/OS X v10.11/v10.10/
v10.9/v10.8/v10.7/Mac OS X v10.6/v10.5 supporting:
• Safari
Android (8.1/8.0/7.1/7.0/6.0/5.1/5.0/4.4/4.3/4.2/4.1/4.0) supporting:
• Google Chrome
iOS (11.4/11.3/11.2/11.1/11.0/10.3/10.2/10.1/10.0/9.3/9.2/9.1/9.0/
8.4/8.3/8.2/8.1/8.0) supporting:
• Safari
<Lock screen>
<Display while idling>
This is displayed when the Power button is pressed.
Product Specications
■Main Unit
Physical dimensions (W × H × D) Approx. 111 (W) × 62 (H) × 13.3 (D) mm
Weight Approx. 128 g (Battery pack attached)
Interface USB connector (USB 2.0 (type C)) × 1*3
Compliant with Bluetooth 4.0 Wireless Technology
Display (touch panel) 2.4 inches (320 × 240 dots) color LCD
Power supply AC adapter
AC 100 V to 240 V ± 10%, 50/60 Hz
Battery pack Lithium-ion, 3.8 V, 3,200 mAh
Continuous standby time*1Waiting state: Approx. 50 hours
Idle state (Remote start available): Approx. 700 hours
Continuous communication time *1*2
(High Speed mode: During Wi-Fi® connection)
Collective Settings (Standard Setting)/Normal mode Approx. 690 minutes
Collective Settings (Prioritize High Speed)/
High Performance mode Approx. 490 minutes
Collective Settings (Prioritize Saving Battery)/Eco mode Approx. 840 minutes
Continuous communication time *1*2
(High Speed Plus Area mode: During Wi-Fi®
connection)
Collective Settings (Standard Setting)/Normal mode Approx. 630 minutes
Collective Settings (Prioritize High Speed)/
High Performance mode Approx. 480 minutes
Collective Settings (Prioritize Saving Battery)/Eco mode Approx. 800 minutes
Continuous communication time *1
(High Speed mode: During Bluetooth® connection) Eco mode Approx. 1,080 minutes
Continuous communication time *1
(High Speed Plus Area mode: During Bluetooth®
connection) Eco mode Approx. 1,010 minutes
Operating environment Operating temperature range: 5°C to 35°C
Operating humidity range: 35% to 85% (with no condensation)
Charging time Approx. 160 minutes (when using the typeC Common AC Adapter 01 U (0601PQV) (sold
separately))
*1:The continuous standby time and continuous communication time may vary depending on the communication network
being used.
*2: The continuous communication time when connected to a single wireless LAN (Wi-Fi®) device.
*3: Use of USB2.0 or later is recommended as a sucient transfer rate cannot be achieved with USB1.1. It should be noted that
operation is not guaranteed with all computers.
■WAN
Communication methods WiMAX 2+, LTE
■LAN
Communication methods Wi-Fi (compliant with IEEE802.11a/b/g/n/ac), compliant with Bluetooth 4.0 Wireless Technology
Supported frequencies Wi-Fi®: 2.4GHz / 5GHz, Bluetooth®: 2.4GHz
Wi-Fi security methods
WEP (128 bit)
WPA2-PSK (AES)
WPA / WPA2-PSK (AES)
WPA / WPA2-PSK (TKIP/AES)
Maximum number of simultane-
ous connections* Wi-Fi®: 10 devices/USB: 1 device/Bluetooth®: 3 devices
* Wireless LAN (Wi-Fi®) and Bluetooth® cannot be used simultaneously.
■USB2.0 TypeC-A cable (sample)
Length Approx. 1.0 m
Weight Approx. 27 g
Interface USB 2.0 type A,
USB 2.0 type C
<Home screen and status icons> <Numerics input screen>
(Example) Input screen for the upper limit
values of data usage
Numerics input
About Communication Modes
The product has the following
communication modes.
•"High Speed" mode ( ) (default setting)
•
"High Speed Plus Area" mode ( )
•"Onetime HS+A" mode ( (green))
In the home screen, tap [Quick Menu] ‑
[Communication Mode] or [Onetime HS+A].
Select a communication mode, and then
tap [YES] in the settings conrmation
screen.
Confirm that the connection status icon is
displayed on the status bar.
•The "Onetime HS+A" mode is used to temporarily
switch to the "High Speed Plus Area" mode when you
move to an area where communications using "High
Speed" mode are not possible.
*A separate designated additional charge may be incurred
if you set "High Speed Plus Area" mode or "Onetime
HS+A" mode.
Status icons
① ② ③④⑤ ⑥ ⑧⑦ ⑨
⑩
Message
This section explains how to connect to wireless LAN (Wi‑Fi®) using a Mac OS computer
and iPad/iPhone/iPod touch as examples.
1Tapping [Manual connection] on the Setup Wizard shows the screen below.
* This section explains what to
do for a primary SSID, without
using the "Wi-Fi Settings
Moving" Function.
Conrm the following information for this product.
• SSID(Primary) (SPWN_N35_xxxxxx)
• Password (AES) (13 alphanumeric characters)
<How to conrm using the display (touch panel)>
Home screen - [Information] - [Wi-Fi Information]
Wi-Fi InformationHome screen
2Turn the PC on and enable the wireless
function.
* Refer to the user manual, etc., for your PC for how
to connect.
3On the Apple menu, click the [ システム環境
設定 (System Conguration)] - [ ネットワーク
(Network)] icon and select [Wi-Fi] from the
service list.
4From the [ ネットワーク名 (Network Name)]
pulldown menu, select the SSID(Primary) of
this product, "SPWN_N35_xxxxxx", that was
displayed in 1.
5Enter the password for this product in [ パ
スワード
(Password)], and then click [ 接続
(Connect)].
* This example screen is from a macOS High Sierra
v.10.13.
6If [ 接続済み (Connected)] is displayed in [ 状
況(Status)], tap [Next] on the product to
return to .
If a connection could not be made, check the
text that you input (such as capital/small letter
case) and that the wireless function for your PC
is enabled, and then retry from step 1.
[For Mac OS]
[For iPad/iPhone/iPod touch]
2Start your iPad/iPhone/iPod touch and tap [Settings].
* Refer to the user manual, etc., for your device for how to connect.
3Tap [Wi-Fi].
4Turn on [Wi-Fi], and tap the SSID(Primary) of this product, "SPWN_N35_xxxxxx", that was
displayed in 1.
5Enter the password for this product
in [Password], and then tap either
[Connect] or [Join].
* This screen is an example using iOS 11.4.
6If the following icon is displayed in the status bar of your iPad/iPhone/iPod touch, tap [Next] on
the product to return to .
If a connection could not be made, check the text that you input (such as capital/small letter
case) and that the wireless function for your device is enabled, and then retry from step 1.
Using a QR Code to Connect to Wireless LAN (Wi-Fi ® )
Conguring the Connection Destination ConnectingWide Area Network (WAN) Conguring the Connection Destination ConnectingWide Area Network (WAN)(Continued)
Launch Quick Setting Web
1Open the web browser on the wireless LAN (Wi-Fi®) device (such as a smartphone) connected to the
product in .
2Tap the Power button to turn o the display.
Settings cannot be done on this product for Quick Setting Web while the display (touch panel)
is on. Additionally, operating this product's display (touch panel) while setting Quick Setting
Web may interrupt the settings on Quick Setting Web.
3Open Quick Setting Web for the product.
Type "http://192.168.179.1" into the address bar in the web browser and either tap [実行 (Execute)]
or [ 開く (Open)], or press the Enter key on the keyboard.
<< Example of Google Chrome's screen for mobile phones >>
<< Example of Microsoft Edge's screen for PCs >>
4Tap or click [Advanced Settings Top] in the screen of Quick Setting Web.
[Advanced Settings
Top] button
5Perform initial settings for administrator password.
Type a password (any string of characters) in the [ パスワード (password)] (Re enter) field and
tap or click [Apply].
* Numbers 0 - 9, letters a - z and A - Z, hyphens (-) and underscores ( _ ) may be used in the password. A password
may be up to 64 single-byte characters.
This password will be required every time you open "Quick Setting Web" for the product.
Make sure that you do not lose this password.
* This screen is displayed when the administrator password is not set.
Administrator
Password Field
Tap or click
6Type "admin" for the [ 名前 (Name)] or [ ユーザー名 (Username)] and the "administrator password"
set in 5for the [ パスワード (Password)], and then tap [ ログイン (SIGN IN)] or click [OK].
Tap or click
admin
Administrator Password
Conguring the Connection Information
●Connecting to Wide Area Network (WAN)
• Follow the procedures below to add profiles when information required for internet connection (user
name, password etc.) is specied by yourWiMAX operator.
• If the WiMAX operator to whom you are subscribed species a preset prole, select the prole in [Settings] ‑
[Network Settings] ‑ [APN Settings] in the home screen. If there is no such information provided, you can use
the prole (Prole name "Internet") of this product to connect to the internet.
When using a smartphone/tablet
(Android device)/iPad/iPhone/iPod touch
When using a PC
1Tap [ ネットワーク設定 (Network Settings)] - [プ
ロファイル設定 (Prole Settings)].
2After selecting [no setup] in the [ プロファイル
リスト
(Prole List)], tap [ 選択 (select)], enter
the setup information such as the APN of the
WiMAX operator to whom you are subscribed,
and tap [ 設定 (Apply)].
* The displayed content may be grayed out.
* If you have any questions, please check with the
WiMAX operator to whom you are subscribed.
3Tap [ 詳細設定 TOP へ(Advanced Settings
Top)].
4Tap [ ネットワーク設定 (Network Settings)] - [接
続設定 (Connection Settings)].
5
In the Profile Selection, select the profile which
you selected in step
2
, and tap [ 設定 (Apply)].
Try opening a website to verify the
connection.
1Click [ ネットワーク設定 (Network Settings)] -
[プロファイル設定 (Prole Settings)].
2
After selecting [no setup] in the [ プロファイル
リスト
(Prole List)], click [ 選択 (select)], enter
the setup information such as the APN of the
WiMAX operator to whom you are subscribed,
and click [ 設定 (Apply)].
* The displayed content may be grayed out.
* If you have any questions, please check with the
WiMAX operator to whom you are subscribed.
3Click [ ネットワーク設定 (Network Settings)] -
[接続設定 (Connection Settings)].
4In the Profile Selection, select the profile
which you selected in step 2, and click [ 設定
(Apply)].
Try opening a website to verify the
connection.
You can use the smartphone application "NEC WiMAX 2+ Tool" to connect to
wireless LAN (Wi‑Fi ® ).
*The "NEC WiMAX 2+ Tool" smartphone application has a Japanese user interface.
1
Open "NEC
WiMAX 2+
Tool".
2
In the main screen
of the "NEC WiMAX
2+ Tool", tap [ 接
続設定ウィザード
(Setup Wizard)].
3Tap the [ ①パス
ワードの設定
(Password
Settings)] button.
4Enter the
password, and
then tap [ 保存
(Save)].
• Take note of the password (administrator password) as
it will be required in order to configure the product. If
you have forgotten the administrator password, it will
not be possible to access the screen of Quick Setting
Web and it will be necessary to initialize the product
and redo all configurations.
Password Memo
* Write it down in the location described in the
enclosed つなぎかたガイド "Setup Guide" (Japanese).
Troubleshooting
If you experience diculty setting up an internet connection even when the instructions in the "Setup Guide" and the " 取扱説明書 詳細版
(Full Instruction Manual)" (Japanese) are followed, please check the following items.
Unable to connect to the
internet • Make sure that you are located in a service area.
• The incoming signal strength may be low. Retry the connection in a location with a higher
incoming signal strength.
• If the "HS" or "HS+A" icon does not appear in the display, launch Quick Setting Web to check
that an internet connection has been properly set up.
Communication is easily
disrupted • The incoming signal strength may be low. Check the radio reception level and move to a
location for a higher incoming signal strength.
•
Check the remaining battery level. If the remaining battery level is low, recharge the battery
pack before reconnecting the product.
• Check to see if the product is properly connected to a PC, or the like, on a wireless LAN (Wi‑Fi®),
Bluetooth®, or by a USB cable.
• If the product is connected to a PC, or the like, on a wireless LAN (Wi‑Fi®) or Bluetooth®
function, reboot the product.
• If there is radio interference from other networks, such as multiple access points having been
set up in the vicinity, radio reception may be improved by changing“Channels”for the product.
• Conrm that this product has the latest rmware.
(How to conrm: Home screen ‑ [Settings] ‑ [Maintenance] ‑ [Firmware Update])
When “There is new rmware available. Do you want to update?” is displayed on the display
of this product, it indicates that a new rmware exists. In that case, refer to the “Updating the
Firmware”of this manual to update the version.
Communication seems
slow • The connection point might be congested. Allow for some time before retrying.
The charge in the battery
seems to decrease quickly. • If the Energy‑Saving Mode is set to "High Performance" mode, switch it to "Eco" mode.
• Turn o "WiMAX High Power" in Network Settings.
Cannot connect to wireless
LAN (Wi‑Fi®)
• In the home screen, set [Settings] ‑ [LAN Settings] ‑ [Wi‑Fi Management Frame]
to [OFF], and then you may be able to connect.
Connecting via Bluetooth ® Function
Use this product as an access point to connect Bluetooth ® equipped devices, such as a
smartphone or tablet, to the internet. It is ecient for saving energy if you are worried about
your battery endurance when away from home.
Up to 3 devices can be connected to the product via the Bluetooth ® function. (For pairing, up to
3 devices can be registered.)
However, depending on the
connection status of your
Bluetooth ® equipped device, the
number of connected devices
may not reach the limit.
* The wireless LAN (Wi-Fi®) function (on the previous page) and the Bluetooth® function cannot be used simultaneously.
• If Bluetooth® is disconnected after pairing, tap the Bluetooth device name for this product on the Bluetooth screen of the
Bluetooth® equipped device you are using to reconnect.
• When the number of paired devices reaches the limit, "You cannot congure because the number of connected devices has
got to the maximum." is displayed on the product's display. In that case, delete pairing information displayed in "Bluetooth
Pairing Info" on "Bluetooth Settings" in the screen of Quick Setting Web.
• Confirm that your Bluetooth® equipped device supports Bluetooth 2.1 or later.
• Confirm that your device supports the profile (PANU), which can connect to the internet.
* For models that support PANU, see the manufacturer's website for each Bluetooth®equipped device.
WAN
Tablet
The product Smartphone
Bluetooth®
About the Collective Settings
You can change to the settings recommended for
how you want to use the product with a single
touch from the product's display (touch panel).
Do settings in the home screen's [Quick Menu] ‑
[Collective Settings].
Select a menu and tap [YES].
Menu Overview of settings
Prioritize
High Speed Sets the product to maximum communication speed.
Standard
Setting Sets the product to a good balance of communication
speed and continuous
operating time.
Prioritize
Saving
Battery
Sets the product to save energy
to extend the continuous
operating time by controlling
the communication speed,
signal transmission output, and
display settings.
Not
Collective
Settings
(Indivisual
Setting)
You can turn off the Collective
Settings function and set Energy-
Saving Mode and adjust the
brightness separately.
(Saves the product's settings as
they are before being turned o)
*When using Collective Settings, specific settings
cannot be changed. Furthermore, the communication
speed and the transmission output of the wireless LAN
(Wi-Fi®) may change and reconnections may happen.
* To turn off the Collective Settings function, select [Not Collective Settings (Indivisual Setting)] and tap [YES]in the confirmation
screen.
(Saves the product's settings as they are before being turned off, so you should do the individual settings according to
how you want to use the product.)
5
Tap the
[ ②Wi-Fi 設定
(Wi-Fi Settings)]
button.
6In the Wi-Fi
settings screen,
tap [OK].
7In the Camera View screen, read the QR Code for
the Wi-Fi settings from the product's screen.
Sample
• How to display the product: In the home
screen, display [Settings] - [Easy Wireless
Settings] - [Rakuraku QR] - [Primary SSID], and
then in the confirmation screen, tap [YES] to
display the QR Code.
8Next, tap [ 設定適用 (Apply)] on the screen, and
then tap [OK] in the conrmation screen.
• In the "NEC WiMAX 2+ Tool" main menu, tap
[情報更新 (Refresh)], and you can confirm
the product's information, and change
the wireless LAN (Wi-Fi®) bandwidth and
communication mode.
* Write it down in the location described in the enclosed つなぎ
かたガイド "Setup Guide" (Japanese).
Administrator Password Memo