NEC OPS-DRD User manual

_OPS-DRD : OPS Digital Signage Player_
Users Manual
v2014-11-21
OPS Form Factor Android Player for Commercial Applications

Copyright
The documentation and the software included with this product are copyrighted 2014 y
Technovare Systems Inc. All rights are reserved. Technovare Systems Inc. reserves the right to
make improvements in the products descri ed in this manual at any time without notice. No
part of this manual may e reproduced, copied, translated or transmitted in any form or y any
means without the prior written permission of Technovare Systems Inc. Information provided in
this manual is intended to e accurate and relia le. However, Technovare Systems Inc. assumes
no responsi ility for its use, nor for any infringements of the rights of third parties, which may
result from its use.
cknowledgements
Android and Chrome are trademarks of Google Corporation.
Technovare is a trademark of Technovare Systems Inc.
All other product names or trademarks are properties of their respective owners.

Product Warranty (36 Months)
Technovare warrants to you, the original purchaser, that each of its products will e free from
defects in materials and workmanship for 36 Months from the date of purchase. This warranty
does not apply to any products which have een repaired or altered y persons other than
repair personnel authorized y Technovare, or which have een su ject to misuse, a use,
accident or improper installation. Technovare assumes no lia ility under the terms of this
warranty as a consequence of such events. Because of Technovare’s high quality-control
standards and rigorous testing, most of our customers never need to use our repair service. If a
Technovare product is defective, it will e repaired or replaced at no charge during the
warranty period. For out of warranty repairs, you will e illed according to the cost of
replacement materials, service time and freight. Please consult your dealer for more details.
Technical Support and ssistance
Visit the NEC Display Solutions Support we site at:
http://nec-display-solutions.com/p/hq/en/home.xhtml
Contact your distri utor, sales representative, or NEC’s customer service center for technical
support if you need additional assistance. Please have the following information ready efore
you call:
•Product name and serial num er
•Description of installed peripheral attachments
•Description of installed software
o(operating system, version, application software, etc.)
•A complete description of the pro lem
•The exact wording of any error messages
If you think you have a defective product, follow these steps:
1. Call your dealer and descri e the pro lem. Please have your manual, product, and any
helpful information readily availa le.
2. If your product is diagnosed as defective, o tain an RMA (return merchandise authorization)
num er from your dealer. This allows us to process your return more quickly.

3. Carefully pack the defective product, a fully-completed Repair and Replacement Order Card
and a photocopy proof of purchase date (such as your sales receipt) in a shippa le container. A
product returned without proof of the purchase date is not eligi le for warranty service.
Technovare shall not e responsi le for lost, stolen or misdirected mail or for damage to the
product incurred during shipping.
4. Write the RMA num er visi ly on the outside of the package and ship it prepaid to your
dealer.
Packing List
Before installation, please ensure the following items have een shipped with the unit:
•1 x OPS-DRD Unit
•1 x WiFi Antenna
•Users Manual (installed on the OPS-DRD unit)

Declaration of Conformity
CE
This product has passed the CE test for environmental specifications. Test conditions for passing
included the equipment eing operated within an industrial enclosure. In order to protect the
product from eing damaged y ESD (Electrostatic Discharge) and EMI leakage, we strongly
recommend the use of CE-compliant industrial enclosure products.
FCC Warning Statement
Changes or modifications not expressly approved y the party responsi le for compliance could
void the user's authority to operate the equipment.
This equipment has een tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasona le
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can e determined y
turning the equipment off and on, the user
is encouraged to try to correct the interference y one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation etween the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help
FCC Radiation Exposure Statement
The antennas used for this transmitter must e installed to provide a separation distance of at
least 20 cm from all persons and must not e co-located or operating in conjunction with any
other antenna or transmitter.

Warnings, Cautions and Notes
Warning!
Warnings indicate conditions, which if not o served, can cause personal injury!
Caution!
Cautions are included to help you avoid damaging hardware or losing data. e.g.
There is a danger of a new attery exploding if it is incorrectly installed. Do not attempt to
recharge, force open, or heat the attery. Replace the attery only with the same or equivalent
type recommended y the manufacturer. Discard used atteries according to the
manufacturer's instructions.
Note!
Notes provide optional additional information.

Safety Instructions
CARE SHALL BE TAKEN TO STORE AND OPERATE THIS EQUIPMENT ACCORDING TO ITS
SPECIFICATIONS.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE TEMPERATURE
MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C (140° F). THIS COULD DAMAGE THE EQUIPMENT.
THE EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT.
•Place this equipment on a relia le surface during installation. Dropping it or letting it fall
may cause damage.
•The openings on the enclosure are for air convection. Protect the equipment from
overheating. DO NOT COVER THE OPENINGS.
•All cautions and warnings on the equipment should e noted.
•Never pour any liquid into an opening. This may cause fire or electrical shock.
•Never open the equipment. For safety reasons, the equipment should e opened only
y qualified service personnel.
•If one of the following situations arises, get the equipment checked y service
personnel:
oLiquid has penetrated into the equipment.
oThe equipment has een exposed to moisture.
oThe equipment does not work well, or you cannot get it to work according to the
user's manual.
oThe equipment has een dropped and damaged.
oThe equipment has o vious signs of reakage.
Caution!
DISCARD USED BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

OPS-DRD USERS M NU L
v2014-11-21
9 | P a g e
Table of Contents
Product Specifications....................................................................................... 10
General ................................................................................................................................................ 10
Power .................................................................................................................................................. 11
Mechanical .......................................................................................................................................... 11
Environmental ..................................................................................................................................... 11
External Connections ........................................................................................ 12
Bottom of Card (BOC) .......................................................................................................................... 12
Top of Card (TOC) ................................................................................................................................ 12
Installation ....................................................................................................... 15
Operating Instructions ...................................................................................... 17
Power ON ............................................................................................................................................ 17
Power OFF ........................................................................................................................................... 18
Sleep / ake ....................................................................................................................................... 18
Unit Reset ............................................................................................................................................ 18
Restore Factory Defaults ..................................................................................................................... 18
pplications ...................................................................................................... 20
Out-of-the-Box Applications ................................................................................................................ 20
Installing New Applications ................................................................................................................. 33
Uninstalling Applications .................................................................................................................... 34
Adding/Removing Installed Applications from Desktop ..................................................................... 35
Launcher Kiosk Mode .......................................................................................................................... 37
System Configuration ........................................................................................ 40
LAN Configuration ........................................................................................................................... 40
LAN Configuration ............................................................................................................................... 42
System Software Updates ................................................................................. 46

OPS-DRD USERS M NU L
v2014-11-21
10 | P a g e
Product Introduction
The OPS-DRD is a full-featured media player running the Android operating system and
packaged in an OPS form-factor. Targeted for Commercial Applications such as Digital Signage,
Quick Service Restaurant, and/or Display Walls, the OPS-DRD is ased on a 1.0 GHz Quad Core
ARM processor with an integrated Multi-Media Processor capa le of full 1080P play ack and
the a ility to run certified third party software.
The OPS-DRD supports true 1080P video with hardware assisted support for formats such as
MPEG2, H.264, and WM9. The OPS-DRD was designed with display integration in mind, and can
e plugged directly into any LCD supporting the Open Plugga le Specification (OPS). Power,
Video, Audio, and Serial control are all accessi le thru the units OPS connector thus eliminating
the need for external ca ling.
The OPS-DRD’s external connections include 2 USB 2.0 for connection to key oard, mouse,
flash, or touch screen, 100/1000 LAN, 802.11n Wifi, Audio, and a SD Card slot for integrated
storage.
Product Specifications
General
Operating System Android Jelly Bean 4.2.2
CPU Allwinner Tech A31 Quad-Core
GPU Integrated PowerVR SGX544 MP2
RAM 2 GB DDR3-1333, Dual Channel (2 x 512M)
Flash 8 GB NAND
Video OPS-HDMI v1.3
1080p @ 50/60 Hz, 720p @ 50/60 Hz
Audio OPS-Analog, Stereo
Network 100/1000BT Ethernet
802.11. /g/n Wireless
I/O
OPS-UART (3.3V LVTTL)
USB 2.0 x 2
SD Card Slot
System Monitor Watch Dog Timer

OPS-DRD USERS M NU L
v2014-11-21
11 | P a g e
Power
Input Power 12.0 V – 19.0 V (16.0V Nominal)
Power Consumption Idle : 2.5 Watts
Max : 12.0 Watts
Mechanical
Dimensions OPS Form Factor (200mm x 119mm x 30mm)
Weight 1.2 l s / 0.52 kg
Gross Weight 2.2 l s / 0.98 kg
Environmental
Operating Temperature 0 °C to +40 °C Am ient
Operating Humidity 80 % max, relative humidity, non-condensing
Storage Temperature -20 °C to +60 °C
EMC FCC Section 15
CE

OPS-DRD USERS M NU L
v2014-11-21
12 | P a g e
External Connections
Bottom of Card (BOC)
The OPS-DRD media player provides a single BOC connector for the purpose of mating with an
OPS compati le display or docking station. This 80-pin connector provides connectivity for the
following interfaces:
a. HDMI Video
. Analog Stereo Audio
c. UART
d. 3 x USB 2.0
OPS-DRD BOC Connector
Top of Card (TOC)
The OPS-DRD media player provides several TOC connectors for the purpose of extending the
capa ilities of the unit. The front face location of these connectors is shown elow:
WiFi 1000BT SD USB RESET
SERVICE
802.11 WLAN
ETHERNET PORT
MINI-USB USB PORTS
SD/SDHC CARD SLOT

OPS-DRD USERS M NU L
v2014-11-21
13 | P a g e
Port
Description
USB
Two (2) USB interface connectors, which provide complete Plug & Play
and hot swapping capa ility for up to 127 external devices. The USB
interface is compliant with USB UHCI, Rev. 2.0. The USB interface supports
Plug and Play, which ena les you to connect or disconnect a device
without turning off the system.
LAN One (1) RJ-45 LAN interface connector, fully compliant with IEEE802.3u
10/100 Base-T CSMA/CD standards. The Ethernet port provides a standard
RJ-45 jack connector with LED indicators to show its Active/Link status and
speed status
W
L
AN
O
ne (1) SMA connector for attaching the provided WiFi antenna.
This port
supports 802.11 /g/n wireless standards.
SD
O
ne (1) standard SD Card Slot for installing
additional flash storage.
SERVICE
This mini
-
USB port is for factory service personnel. It is not intended for end
-
user
access.
Caution!
IMPROPER USE OF THIS PORT MAY RESULT IN COMPLETE LOSS OF UNIT
FUNCTIONALITY.
In addition to the TOC connectors, the OPS-DRD provides several TOC switches as shown elow.
WiFi 1000BT SD USB RESET
SERVICE
UBOOT SWITCH
RESET SWITCH
POWER SWITCH

OPS-DRD USERS M NU L
v2014-11-21
14 | P a g e
Switch
Description
PWR
Power Switch: Allows user to power ON/OFF the unit.
Press and hold utton for ~ 1 sec to initiate a power ON/OFF event.
RST Reset Switch : Allows user to re oot unit.
Press and release utton to initiate a reset event.
UBOOT
UBOOT Switch : Provides support for Firmware Upgrades
See section entitled “System Software Updates” for further usage.

OPS-DRD USERS M NU L
v2014-11-21
15 | P a g e
Installation
1. Ensure power is OFF on OPS-compati le display.
2. With the USB Ports of the unit towards the top, slide the OPS-DRD media player into the
OPS slot on display.
3. Apply medium inward insertion force to unit such that the BOC connector positively
engages monitor connector.
Caution!
IF UNIT DOES NOT MATE EASILY WITH MONITOR USING MEDIUM INSERTION FORCE,
DO NOT INCREASE FORCE. REMOVE UNIT AND VERIFY PROPER ORIENTATION
BEFORE REPEATING.
4. Attach OPS-DRD media player to OPS slot on display with the two (2) machine screws
provided.
OPS-DRD Installation

OPS-DRD USERS M NU L
v2014-11-21
16 | P a g e
5. Attach peripheral devices as required. See Figure elow.
OPS-DRD Connections

Operating Instructions
Power ON
1. Ensure the OPS-
DRD unit is securely installed in an OPS
2.
The following OPS display configuration may require reference to the manufacturer’s
documentation.
a.
Ensure that the Option
.
Ensure that the displays video input is set to OPTION.
c.
Ensure that the displays audio
d. Turn ON the OPS
-
The OPS-DRD
media player power LED should illuminate and the units egin to oot. At the
completion of successful oot, the following screen will e displayed:
OPS
OPS-
DRD USERS M NU L
DRD unit is securely installed in an OPS
-
compati le display
The following OPS display configuration may require reference to the manufacturer’s
Ensure that the Option
-
Slot Power on the display is configured to ON.
Ensure that the displays video input is set to OPTION.
Ensure that the displays audio
input is set to OPTION.
-
compati le display.
media player power LED should illuminate and the units egin to oot. At the
completion of successful oot, the following screen will e displayed:
OPS
-DRD First Boot Screen
DRD USERS M NU L
v2014-11-21
17 | P a g e
compati le display
.
The following OPS display configuration may require reference to the manufacturer’s
Slot Power on the display is configured to ON.
media player power LED should illuminate and the units egin to oot. At the

OPS-DRD USERS M NU L
v2014-11-21
18 | P a g e
To power ON the unit when it is already installed in a powered display:
1. Press and hold the POWER utton until the POWER LED ecomes illuminated.
Power OFF
1. The OPS-DRD unit can e powered OFF y pressing and holding the POWER BUTTON
until a message indicating device shutdown appears on the display.
Sleep / ake
1. The OPS-DRD unit can e put to SLEEP from a powered ON state y quickly pressing and
releasing the POWER utton. The display will immediately go lack and the POWER LED
will turn OFF after a short period.
2. The OPS-DRD unit can e commanded to WAKE from a SLEEP state y quickly pressing
and releasing the POWER utton. The display will immediately return to displaying what
was displayed when the unit was placed into the SLEEP state. In addition, the POWER
LED will turn ON.
Unit Reset
1. The OPS-DRD unit can e reset y pressing and holding the RESET BUTTON until the
display goes dark. The unit will egin ooting upon release of the RESET BUTTON.
Restore Factory Defaults
Caution!
RESTORING FACTORY DEFAULTS WILL CAUSE ALL INSTALLED APPLICATIONS, DATA AND
SETTINGS TO BE LOST. BACKUP ALL IMPORTANT DATA BEFORE CONTINUING.
1. Open the Settings application and click on the “Backup & reset” menu item.
2. Select “Factory data reset” and the pop-up elow will e displayed.
3. Check the “Erase SD card” ox.
4. Click “Reset ta let” utton

The OPS-DRD unit
will egin restoring factory defaults. This process should take approximately 2
minutes.
OPS-
DRD USERS M NU L
Restore Factory Defaults
will egin restoring factory defaults. This process should take approximately 2
DRD USERS M NU L
v2014-11-21
19 | P a g e
will egin restoring factory defaults. This process should take approximately 2

OPS-DRD USERS M NU L
v2014-11-21
20 | P a g e
pplications
Out-of-the-Box Applications
Out-of-the-Box, the OPS-DRD provides the applications shown in the figure elow. These
applications provide asic media player functions such as slideshow displays, video and audio
play ack as well as content management on internal/external storage.
Out-of-the-Box pplications