1.Remove all packaging before use.
2.Clean the grill plates A28 with a damp cloth.
3.Dry A2 and A8 with a cloth or paper towel.
Using the product
When the product heats up for the first time, it may emit slight smoke or odour. This
is normal and does not affect the safety of the product.
1.Plug the power cable A9 into a power outlet.
The power indicator LED A6 lights up to indicate that the product is switched on.
2.Set the temperature dial A5 to the desired setting.
The status indicator LED A7 lights up to indicate that the product preheating.
3.Wait until A7 switches off.
Place the drip tray Aq underneath the opening in A8.
To allow excess grease to flow more efficiently to the drip tray, adjust the extendable
feet to tilt the product.
4.Slightly grease the grill plates A28 with edible oil.
5.Place the food on A8.
6.Close A2 using the handle A1.
7.When the food is cooked, open A2 with A1.
Do not use a metal tool to remove the food to avoid damaging the coating.
8.After use, unplug A9.
Using the product as an open grill
Make sure the product is switched off and has cooled down.
1.Lift the top half of the product up vertically using A1.
2.Turn the hinge lock A3 clockwise.
3.Fold the top half further open flat using A8.
Place Aq underneath the opening on A2 and A8.
Maintenance
Cleaning and storage
Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can
damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone
when cleaning the product.
1.Unplug the product from the power outlet and allow it to cool down.
2.Absorb the excess oil with a dry paper towel, brush the crumbs from the grooves
and wipe A28 with a damp cloth and mild soap.
3.Make sure the product is cool and dry before storage.
4.Clean Aq in hot water with dish soap.
Use the lock A4 to keep the product closed during storage.