Neoi 906 Series User manual

NeoIT-Chat Instructions for NEOI 906 and 809 series
Congratulations, You just bought the world’s most advanced mobile phone, the only mobile
phone that has an independent IT Chat application, to communicate secured with other NEOI
subscribers mobile phones 906 and 809 , and / or Your PC-desktop / Notebook Computer.
You have received already the separate Instructions how to setup Your PC / Notebook for
NeoIT-Chat, to communicate secured with other NeoIT-Chat subscribers and of course ( un-
secured) with any MSN Chat subscriber.
These Instructions will guide You step by step through the setup of Your Neoi 906 and 809.
1.) The NeoIT-Chat is already integrated into Your Neoi Phones.
a.) To access Your NeoIT-Chat, Press the DOWN ARROW on the Keyboard

b.)

c.) High light “Launch” ( For Display movements use always the 4-Way Arrows , Up, Down,
Left, Right), the center Button serves as “Enter”

d.) Then Press OK and the Java screen will open, after that the Username and Password
Screen will open.

e.) First Time User must enter their Username and Password.

f.) To do so Press Option then Ok , High Light New User , Ok , enter Your Username .
g.) To enter the User name Press # on the Keyboard and get the writing screen

h.) For selection of Letters / Numbers press the # several Times, the type Your Information,
for example the Username ( Number ) You received 76546778, the Press Option, go to
DONE, Press Ok
i.) Repeat the same with Password , Name, Last Name, eMail. Note: as eMail use Your eMail
address which You used to apply for the NeoIT-Chat Account.
j.) Once You have entered all the New Information for a New User, Press Back and You will
see the Log On Screen with Your Information

k.) Press Option , go to CONNECT, Press Ok, receive the Connection Screen.

l.) Once connected you will see the screen with all users You have before programmed,
NeoIT-Chat Users, and MSN Users.

m.) To open a Chat Conversation go to a subscriber ( in this example 67638381) Press
Option , go down to Send Message , Press Ok,

n.) Press Write , Press # to get the write entry screen, select like always, Letters and Numbers
entry with the # key , type your message ( in this example Test Setup) Press OPTION,
DONE, OK

o.) Option , Send , Ok ( or add an emoticon Icon) receive the Send screen

p.) Press Disconnect to return to User Screen, Press Exit , to exit the application, then Press
the Phone Hang Up Button.

Setting Up WAP and GPRS for NeoIT-Chat
Please Follow these Instructions to set up a GPRS and WAP Profile for Your NeoIT-Chat
Application.
Please note: You Need the GPRS and WAP set Up Instructions from Your SIM Card Service
Provider, in order to set up the 906 and 809. You CANNOT use WAP and / or GPRS Settings
from a 3rd Provider, which is NOT Your SIM Card Service Provider!
1.) Press MENUE >>> SERVICES >>> OK >>> Data Account >>>> GPRS >>>

2.) Look for an empty Profile >>> EDIT