Neoline X-COP 8700 User manual

1
User’s Manual of X-COP 8700
[ X-COP 8700 Introduction]
- X-COP 8700 is high performance GPS Radar Detector specially designed and optimized for European
and Russian markets, which receives the signals of X, K, Ka, M, Laser, Strelka bands and GPS signal
effectively.
- The GPS module is equipped so that it catches the radar signals and the fixed and moved speed
cameras as well and gives a warning to driver effectively.
- Full color OLED display with 16bit-Color(160*32 pixels) provides more various information to driver.
- X-COP 8700 have a special feature “Motion Control” which is controlled mute on/off by gesture of
hand.
- USB OTG is more powerful feature to update that the device can be updated by using PC, as well as
USB memory.
- Before using X-COP 8700, please read the method of use as follows.
Contents
[ Features ] ..................................................................................................................................................................................................................... 2
[ Specifications ] .......................................................................................................................................................................................................... 3
[ Devices & Accessories ] ....................................................................................................................................................................................... 4
[ Installation ] ............................................................................................................................................................................................................... 5
[ Operation ] .................................................................................................................................................................................................................. 6
1. Power On and Off. ................................................................................................................................................................................... 6
2. BUTTON operation .................................................................................................................................................................................. 6
3. SET mode ...................................................................................................................................................................................................... 8
5. Display operation ...................................................................................................................................................................................20
6. Motion control operation..................................................................................................................................................................21
7. Automute operation .............................................................................................................................................................................22

2
8. Radar Alert. ...............................................................................................................................................................................................22
9. GPS Alert .....................................................................................................................................................................................................23
[ Update ] ......................................................................................................................................................................................................................24
1. By using PC .................................................................................................................................................................................................24
2. By using USB memory (OTG feature) .............................................................................................................................................27
[ Features ]
- Radar & Laser detection and GPS POI Alert
- 16bit-Color Display (160*32 pixels)
- Mute on/off by motion control feature.
- 4-buttons : PWR/MENU, DOWN, UP, CITY/Mode
- Motion Control
- Illumination LED (7 Color)
- CDS (Brightness control) sensor
- Electrical Volume Control(8-Levels)
- Electrical Power On/Off

3
- Radar band detection On/Off
- Voice/Beep On and Off
- Voice Alert Type
- Silence mode
- Silence zone
- Filter Z signature
- Radius setting for GPS POI alerting
- GPS POI Detection distance setting
- Legal overspeeding setting
- Maximum overspeed
- Detectable X/M/K/Ka/Laser/Strelka
- Undetectable by VG-2
- Strelka signal strength level display : 5-Levels
- Language : Russian, English, Lithuania, German, Spain
- Updateable Firmware/Voice/Database by using PC or Micro OTG USB memory
- Input voltage : DC 12V ~ 24V
[ Specifications ]
1. Radar detection frequency
Ultra-X and Ultra-K Band
X-Band (10.525GHz +/- 50MHz)
K-Band (24.150GHz +/- 100MHz)
KA-Band (34.70GHz +/- 1300MHz)
Laser Band(800nm ~ 1100nm)
Strelka detection with signal strength meter(24.150 GHZ)

4
2. GPS specifications
GPS Module : L76-L(Media Tek ChipSet), Glonass
Patch antenna (18mm * 18 mm), Glonass
Hot start time : < 1 second
Cold start time : < 15 seconds
3. Characteristics
Input voltage : DC 12V ~ 24V
Current consumption : Normal 280mA, Max 410mA
Dimension : 127(L) * 75(W) * 36(H)
Operating Temperature : -20°C ~ 70°C
[ Devices & Accessories ]
- The following items are included in the box.
① X-COP 8700 Radar unit
② 3M tape for holder (2pcs)
③ Windshield mounting bracket and suction cups

5
④ Cigarette power cord with On/Off button(DC12V ~ 24V)
⑤ OTG Micro USB Cable
[ Installation ]
1. The Suction cups and bumper are assembled into bracket as like the following picture.
2. Stick the assembled bracket on the car front window as like the following picture.
3. Insert X-COP 8700 into bracket as like the following picture.
4. Adjust the X-COP 8700 to be horizontal by bending the bracket.
Insert the 12V/24V DC Cord into the Cigarette lighter cord in car and the jack into X-COP 8700.

6
[ Operation ]
1. Power On and Off.
1.1. When you start an engine at the condition of the power cord is connected, X-COP 8700 will be power
on and start the self-test and then become a Stand-by mode.
(Logo Animation Display for 2 seconds)
(Stand-by display)
Current car speed and time are showing on the display.
1.2. To p ow e r off X-COP 8700, turn off a car engine or press PWR/MENU button for two seconds.
1.3. When you power off by pressing PWR/MENU button, 3-beeps will be announced and display will show
LOGO and blinking.
2. BUTTON operation
2.1. Left Button
2.1.1. Short Press : enter into SET mode.
Or Power On operation at Power Off condition.
Or Change the setting order at Setting mode.
2.1.2. Long Press : Power Off operation.
Or save the setting value at Setting mode, and then go back to Stand-by mode
2.2. DOWN/UP Button
2.2.1. Normal operation : VOLUME Level change (0 ~ 8 level)
Blinking

7
2.2.2. During radar alert : silence zone addition/deletion
- When radar is alert, press UP or DOWN button for 1.5 sec then the area will be added
on silence zone.
- When car is within silence zone, press UP or DOWN button for 1.5 sec then the area
will be deleted from silence zone.
2.2.3. Operation at SET mode : SET value change
2.3. Right Button
2.3.1. Short Press
- Mode Change : Turbo, Highway, City, X-COP,
- City / X-COP / Highway Mode
Highway Mode : Full sensitivity, “Highway mode” will be announced.
Turbo Mode : Maximum sensitivity, “Tur bo mode” will be announced.
City Mode : Sensitivity 20dBm down, “City mode” will be announced.
X-COP Mode : Mode and GPS/Radar priority will be changed according to the car speed.
“X-COP mode” will be announced.
When speed is 0Km ~ 40Km
è City Mode & Radar voice and alert sound Off
When speed is 41Km ~ 70Km
è City Mode
è GPS alert priority is higher than Radar alert.
When speed is faster than 71Km
è Highway Mode
è Radar alert priority is higher than GPS alert

8
2.3.2. Long Press : User location addition/deletion
2.3.2.1. User location addition
- Press the button during normal mode, the user point will be added
- “User area is added” will be announced and display text message.
2.3.2.2. User location deletion
- Press the button during User area alerting, the user point will be deleted
- “User area is deleted” will be announced and display text message
2.4. Left + Right Button
Go into X-LOGIC Mode
3. SET mode
3.1. How to enter into the SET mode : Press Left Button.
Voice will be heard like “Settings” and display will be shown like below.
3.2. How to get out of SET mode
Press SET/MUTE button or leave for 5 seconds without touching any button.
3.3. Whenever press PWR/MENU Button, the SET mode will be changed with the following order.
3.3.1. Filter Z-signature ON/OFF (change by DOWN/UP)
(Filter Z-signature ON)

9
(Filter Z-signature OFF)
3.3.2. Auto Turbo (change by DOWN/UP)
Set range : OFF/40Km/50Km/60Km…140Km
3.3.3. AutoMute ON/OFF (change by DOWN/UP)
At AutoMute On, the volume level will be decreased 50% in 6 seconds after starting
Radar Alert.
(AutoMute On)
(AutoMute Off)
3.3.4. Voice ON/OFF(change by DOWN/UP)
Voice On/off
(Voice On )
(Voice Off )
3.3.5. Beep ON/OFF (change by DOWN/UP)
(Beep On)
(Beep Off)
3.3.6. Mute ON/OFF (change by DOWN/UP)
(Mute On)
(Mute Off)
3.3.7. After pass beep (change by DOWN/UP)
(After pass beep On)

10
(After pass beep Off)
3.3.8. GPS alarm (change by DOWN/UP)
(GPS alarm On)
(GPS alarm Off)
3.3.9. Radar alarm (change by DOWN/UP)
(Radar alarm On)
(Radar alarm Off)
3.3.10. GPS Mute till (change by DOWN/UP)
Set range : OFF/10Km/20Km/30Km…130Km
3.3.11. RD Mute till (change by DOWN/UP)
Set range : OFF/10Km/20Km/30Km…130Km
3.3.12. Priority (change by DOWN/UP)
When priority is GPS, GPS alert priority is higher than Radar alert
(Priority GPS)
When priority is RD, Radar alert priority is higher than GPS alert
(Priority RD)
3.3.13. Legal overspeeding (change by DOWN/UP)
The set value will be added to the speed limit of GPS POI.
Set range : OFF/2Km/4Km/6Km…20Km
3.3.14. Maximum overspeed setting (change by DOWN/UP)
If car speed is higher than set value, beeping will be out until speed is lower than set
value.
Set range : OFF/80Km/90Km/100Km …. 180Km
3.3.15. GPS distance (change by DOWN/UP)

11
GPS POI detection distance can be adjusted by setting range.
When distance is set by car speed, detection distance is as below.
Car Speed
Distance
0Km ~ 60Km
600 meters
61Km ~ 70Km
650 meters
71Km ~ 80Km
700 meters
81Km ~ 90Km
750 meters
91Km ~ 100Km
800 meters
101Km ~ 110Km
850 meters
110Km ~
900 meters
When distance is set by GPS DB, detection distance is referenced in database.
When distance is set by 300m ~ 900m, this value is detection distance.
Set range : By DB/ By car speed/300m/400m … 900m
3.3.16. SZ radius (change by DOWN/UP)
The detection range of silence zone can be changed.
Set range : By DB/100m/200m/300m/400m.
3.3.17. DZ radius (change by DOWN/UP)
The detection range of user alert zone can be changed.
Set range : 200m/300m/400m/500m/600m/700m/800m.
3.3.18. Delete zones? (change by DOWN/UP)
All user area will be deleted – when user move to “Yes” by using Up or Down
button.
3.3.19. GPS Strelkas (change by DOWN/UP)
Strelka On/off
(Strelka On)
(Strelka Off)
3.3.20. Police posts (change by DOWN/UP)
Police posts On/Off

12
Police posts(On)
Police posts(On)
3.3.21. Dummies (change by DOWN/UP)
FAKE Signal On/Off.
(Dummies On)
(Dummies Off)
3.3.22. X-Band (change by DOWN/UP)
(X-Band On)
(X-Band Off)
3.3.23. K-Band (change by DOWN/UP)
Wide : 23.900 – 24.250 GHz
Narrow : 24.055 – 24.190 GHz
Super narrow : 24.075 – 24.130 GHz
(K-Band Wide)
(K-Band Narrow)
(K-Band Super narrow)
3.3.24. K-Band POP (change by DOWN/UP)

13
(K-Band POP On)
(K-Band POP Off)
3.3.25. K-Band in City (change by DOWN/UP)
(K-Band in City On)
(K-Band in City Off)
3.3.26. M-Band (change by DOWN/UP)
(M-Band On)
(M-Band Off)
3.3.27. Ka-Band (change by DOWN/UP)
(Ka-Band On)
(Ka-Band Off)
3.3.28. Ka-Band POP (change by DOWN/UP)
(Ka-Band POP On)
(Ka-Band POP Off)
3.3.29. Ka Filter (change by DOWN/UP)
(Ka Filter On)
(Ka Filter Off)
3.3.30. Laser (change by DOWN/UP)

14
(Laser On)
(Laser Off)
3.3.31. Strelka (change by DOWN/UP)
(Strelka On)
(Strelka Off)
3.3.32. Band Selection (change by DOWN/UP)
Off / World / Europe / Baltic / Russia / CIS / PRO
* World / Europe / Baltic / Russia / CIS – Automatic Band setting for each Selections
* PRO – User can set the bands
(Band Selection Off)
(Band Selection World)
(Band Selection Europe)
(Band Selection Baltic)
(Band Selection Russia)
(Band Selection CIS)
(Band Selection PRO)
Band Selection
World
Europe
Baltic
Russia
CIS
PRO

15
Filter Z signature
All On
Not
Change
KA filter
All On
X Band
All Off
K Band
Wide
Wide
Narrow
Wide
Wide
K Band POP
On
On
Off
Off
On
K Band in the city
All On
M Band
All On
KA Band
Wide
Narrow
Wide
Off
Off
33.400 ~ 33.700 GHz
On
Off
On
Off
Off
33.700 ~ 33.900 GHz
Off
33.900 ~ 34.200 GHz
On
34.200 ~ 34.600 GHz
On
34.600 ~ 34.800 GHz
On
34.800 ~ 35.160 GHz
Off
35.160 ~ 35.400 GHz
Off
35.400 ~ 35.600 GHz
On
35.600 ~ 35.840 GHz
On
35.840 – 36.000 GHz
Off
KA Band POP
On
On
Off
Off
Off
Laser Band
All On
Strelka
Off
Off
Off
On
On
Police post
All On
DUMMIES
All On
3.3.33. Ka Band Narrow (change by DOWN/UP)
* It displays at ‘PRO’ setting only.
- 33.400 ~ 33.700 GHz On/Off
- 33.700 ~ 33.900 GHz On/Off
- 33.900 ~ 34.200 GHz On/Off
- 34.200 ~ 34.600 GHz On/Off
- 34.600 ~ 34.800 GHz On/Off
- 34.800 ~ 35.160 GHz On/Off
- 35.160 ~ 35.400 GHz On/Off
- 35.400 ~ 35.600 GHz On/Off

16
- 35.600 ~ 35.840 GHz On/Off
- 35.840 – 36.000 GHz On/Off
3.3.34. Timezone (change by DOWN/UP)
You need to set the time at first because each location and country has a different time.
Please note that the time set change is available by each 1 hours.
Set range : -24hours ~ +24hours.
3.3.35. Metric system (change by DOWN/UP)
Metric system
Speed
Distance
km/h
kilometer per hour
meter
mph
mile per hour
feet
(Metric system km/h)
(Metric system mph)
3.3.36. Language (change by DOWN/UP) – for Display and Voice announcements
(Language Russian)
(Language English)
(Language Latvian)
(Language Deutsch)
3.3.37. Low Battery Warning (change by DOWN/UP)
In case the voltage of Car battery is lower than 12.3V, X-COP 8700 gives Low battery
warning and then turn off by itself so as to prevent from being discharged.
When Low voltage warning On

17
When Low voltage warning Off
3.3.38. Motion Control (change by DOWN/UP)
(Motion Control Beep)
(Motion Control Mute)
(Motion Control Off)
3.3.39. Backlight (change by DOWN/UP)
Bright : Full brightness, “Bright” will be announced.
Dim : 50% brightness, “Dim” will be announced.
Dark : Display OFF, “Dark” will be announced.
Auto : Automatic brightness control
3.3.40. Backlight LED (change by DOWN/UP)
(LED White)
(LED Light Blue)
(LED Blue)
(LED Yellow)

18
(LED Green)
(LED Red)
(LED Off)
3.3.41. Backlight LED mode
(Backlight LED mode GPS&RD)
(Backlight LED mode GPS)
(Backlight LED mode RD)
(Backlight LED mode Off)
3.3.42. Display color
(Display Color White)
(Display Color Light blue)
(Display Color Blue)
(Display Color Yellow)
(Display Color Green)
(Display Color Red)
3.3.43. Display flip

19
(LCD Display Normal)
(LCD Display Reverse)
3.3.44. Settings reset
Factory reset values are restored
Default Values
Mode
X-COP
X-Band
Off
Filter Z-signature
On
K-Band
Wide
Auto Turbo
90 km/h
K-Band POP
Off
Automute
On
K-Band in City
On
Voice
On
M-Band
On
Beep
On
Ka-Band
Off
Mute
On
Ka-Band POP
Off
After pass beep
On
Ka Filter
Off
GPS alarm
On
Laser
On
Radar alarm
On
Strelka
On
GPS Mute till
Off
Band Selection
World
RD Mute till
Off
Timezone
GMT+2
Priority
GPS
Metric system
km/h
Legal overspeeding
Off
Language
Russian
Maximum speed
Off
Low Battery Warning
On
GPS distance
DataBase
Motion Control
Beep
SZ radius
100m
Backlight
Bright
DZ radius
200m
Backlight LED
Blue
GPS Strelkas
On
Backlight LED mode
GPS&RD
Police posts
On
Display color
Blue
Dummies
On
Display flip
No
4. XLOGIC mode

20
- Speed : Current car speed
- Timer : 0 ~ 99.9 sec.
- 0~60km/h : Time from 0 to 60km/h
- 0~100km/h : Time from 0 to 100km/h.
- 1/4 Mile : Time from 0 to 1/4 Mile
- 100~150km/h : Time from 100km/h to 150km/h
- 100~200km/h : Time from 100km/h to 200km/h
4.1. Start
When car moves, it starts automatically.
4.2. End
When car speed gets to 200Km/h within 100 secs, or it is over 100 seconds from the start, XLOGIC is
ended.
Is automatically saved and the results.
Store in the five result of the last measurement..
4.3. Delete ( Left Button )
Deletes the result that is currently being viewed.
4.4. Result check (change by DOWN/UP)
User can check the saved previous results.
4.5. Result inquiry ( Right Button )
You can inquire the stored results.
5. Display operation
5.1. City/Highway/Turbo/ X-COP icon display