NETGEAR A6100 User manual

Support and Community
Visit netgear.com/support to get your questions answered and access the latest
downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en
français canadien à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian
French at https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of
Conformity, visit https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit
https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree,
return the device to your place of purchase within your return period.
Applicable to 6 GHz devices only: Only use the device indoors. The operation
of 6 GHz devices is prohibited on oil platforms, cars, trains, boats, and aircraft,
except that operation of this device is permitted in large aircraft while ying
above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is
prohibited for control of or communications with unmanned aircraft systems.
Quick Start
AC600 Dual Band Wireless AC Adapter
Model A6100
December 2021
NOTE: Download and install the adapter software or standalone driver
from the NETGEAR website before inserting the WiFi adapter into your
computer.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non-NETGEAR
trademarks are used for reference purposes only.

Join a WiFi network using WPS
1. Insert the adapter into a USB port on your computer.
2. Press and hold the WPS button on the adapter for two seconds.
3. Within two minutes, press the WPS button on your WiFi router or gateway.
The adapter joins the WiFi network, which might take a few minutes. Your
settings are saved in a prole.
The adapter software allows you to connect the adapter to a WiFi network.
1. Visit https://www.netgear.com/support/download/?model=&model=A6100
and download the latest software le.
2. Unzip the les from the .zip le.
3. Double-click the le that ends in.exe and does not include Standalone in
the le name.
4. Follow the prompts to complete installation.
Install the adapter software Join a WiFi network
You can view the WiFi connection status using the adapter icon that displays in
your Windows system tray. To view details about the WiFi connection, open the
adapter software.
The color of the icon indicates the strength of your WiFi connection:
• White: Strong connection
• Yellow: Weak connection
• Red: No connection
If you remove your adapter, the adapter software becomes unavailable and the
icon does not display. When you insert the adapter again, the icon returns.
View your connection status
The standalone driver allows you to use your computer’s built-in Windows WiFi
network settings to connect the adapter to a WiFi network instead of using the
adapter software.
1. Visit https://www.netgear.com/support/download/?model=&model=A6100
and download the latest software le.
2. Unzip the les from the .zip le.
3. Double-click the le that ends in.exe and includes Standalone in the le
name.
4. Follow the prompts to complete installation.
Install the standalone driver
You can join a WiFi network using the adapter software, your computer’s built-in
Windows WiFi network settings, or Wi-Fi Protected Setup (WPS) if your WiFi
router supports it.
Join a WiFi network using the adapter software
1. Make sure the adapter software is installed.
For more information, see Install the adapter software.
2. Insert the adapter into a USB port on your computer.
3. In the Windows system tray, click the icon to launch the adapter software.
4. Click the Join a Network button.
5. Select a WiFi network.
6. Click the Connect button.
7. If the WiFi network is secure, enter its password or network key.
The adapter joins the WiFi network, which might take a few minutes.
Join a WiFi network using the built-in Windows WiFi
network settings
1. Make sure the standalone driver is installed.
For more information, see Install the standalone driver.
2. Insert the adapter into a USB port on your computer.
3. Open the WiFi network settings on your computer and select a WiFi network
to connect.
For more information about how to connect to a WiFi network using your
computer, see the Microsoft Windows support site.

Join a WiFi network using WPS
1. Insert the adapter into a USB port on your computer.
2. Press and hold the WPS button on the adapter for two seconds.
3. Within two minutes, press the WPS button on your WiFi router or gateway.
The adapter joins the WiFi network, which might take a few minutes. Your
settings are saved in a prole.
The adapter software allows you to connect the adapter to a WiFi network.
1. Visit https://www.netgear.com/support/download/?model=&model=A6100
and download the latest software le.
2. Unzip the les from the .zip le.
3. Double-click the le that ends in.exe and does not include Standalone in
the le name.
4. Follow the prompts to complete installation.
Install the adapter software Join a WiFi network
You can view the WiFi connection status using the adapter icon that displays in
your Windows system tray. To view details about the WiFi connection, open the
adapter software.
The color of the icon indicates the strength of your WiFi connection:
• White: Strong connection
• Yellow: Weak connection
• Red: No connection
If you remove your adapter, the adapter software becomes unavailable and the
icon does not display. When you insert the adapter again, the icon returns.
View your connection status
The standalone driver allows you to use your computer’s built-in Windows WiFi
network settings to connect the adapter to a WiFi network instead of using the
adapter software.
1. Visit https://www.netgear.com/support/download/?model=&model=A6100
and download the latest software le.
2. Unzip the les from the .zip le.
3. Double-click the le that ends in.exe and includes Standalone in the le
name.
4. Follow the prompts to complete installation.
Install the standalone driver
You can join a WiFi network using the adapter software, your computer’s built-in
Windows WiFi network settings, or Wi-Fi Protected Setup (WPS) if your WiFi
router supports it.
Join a WiFi network using the adapter software
1. Make sure the adapter software is installed.
For more information, see Install the adapter software.
2. Insert the adapter into a USB port on your computer.
3. In the Windows system tray, click the icon to launch the adapter software.
4. Click the Join a Network button.
5. Select a WiFi network.
6. Click the Connect button.
7. If the WiFi network is secure, enter its password or network key.
The adapter joins the WiFi network, which might take a few minutes.
Join a WiFi network using the built-in Windows WiFi
network settings
1. Make sure the standalone driver is installed.
For more information, see Install the standalone driver.
2. Insert the adapter into a USB port on your computer.
3. Open the WiFi network settings on your computer and select a WiFi network
to connect.
For more information about how to connect to a WiFi network using your
computer, see the Microsoft Windows support site.

Join a WiFi network using WPS
1. Insert the adapter into a USB port on your computer.
2. Press and hold the WPS button on the adapter for two seconds.
3. Within two minutes, press the WPS button on your WiFi router or gateway.
The adapter joins the WiFi network, which might take a few minutes. Your
settings are saved in a prole.
The adapter software allows you to connect the adapter to a WiFi network.
1. Visit https://www.netgear.com/support/download/?model=&model=A6100
and download the latest software le.
2. Unzip the les from the .zip le.
3. Double-click the le that ends in.exe and does not include Standalone in
the le name.
4. Follow the prompts to complete installation.
Install the adapter software Join a WiFi network
You can view the WiFi connection status using the adapter icon that displays in
your Windows system tray. To view details about the WiFi connection, open the
adapter software.
The color of the icon indicates the strength of your WiFi connection:
• White: Strong connection
• Yellow: Weak connection
• Red: No connection
If you remove your adapter, the adapter software becomes unavailable and the
icon does not display. When you insert the adapter again, the icon returns.
View your connection status
The standalone driver allows you to use your computer’s built-in Windows WiFi
network settings to connect the adapter to a WiFi network instead of using the
adapter software.
1. Visit https://www.netgear.com/support/download/?model=&model=A6100
and download the latest software le.
2. Unzip the les from the .zip le.
3. Double-click the le that ends in.exe and includes Standalone in the le
name.
4. Follow the prompts to complete installation.
Install the standalone driver
You can join a WiFi network using the adapter software, your computer’s built-in
Windows WiFi network settings, or Wi-Fi Protected Setup (WPS) if your WiFi
router supports it.
Join a WiFi network using the adapter software
1. Make sure the adapter software is installed.
For more information, see Install the adapter software.
2. Insert the adapter into a USB port on your computer.
3. In the Windows system tray, click the icon to launch the adapter software.
4. Click the Join a Network button.
5. Select a WiFi network.
6. Click the Connect button.
7. If the WiFi network is secure, enter its password or network key.
The adapter joins the WiFi network, which might take a few minutes.
Join a WiFi network using the built-in Windows WiFi
network settings
1. Make sure the standalone driver is installed.
For more information, see Install the standalone driver.
2. Insert the adapter into a USB port on your computer.
3. Open the WiFi network settings on your computer and select a WiFi network
to connect.
For more information about how to connect to a WiFi network using your
computer, see the Microsoft Windows support site.

Support and Community
Visit netgear.com/support to get your questions answered and access the latest
downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en
français canadien à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian
French at https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of
Conformity, visit https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit
https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree,
return the device to your place of purchase within your return period.
Applicable to 6 GHz devices only: Only use the device indoors. The operation
of 6 GHz devices is prohibited on oil platforms, cars, trains, boats, and aircraft,
except that operation of this device is permitted in large aircraft while ying
above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is
prohibited for control of or communications with unmanned aircraft systems.
Quick Start
AC600 Dual Band Wireless AC Adapter
Model A6100
December 2021
NOTE: Download and install the adapter software or standalone driver
from the NETGEAR website before inserting the WiFi adapter into your
computer.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non-NETGEAR
trademarks are used for reference purposes only.