NETGEAR Arlo VMA4800 User manual

Indoor Power Adapter
Quick Start Guide

Welcome
Thank you for choosing Arlo.
Getting started is easy.

3
What’s Included
Power adapter Power cable Window decal

4
• Use this power cable and adapter only indoors.
• Use an Arlo mount to secure your device to a flat surface.
You cannot position an Arlo device on a flat surface
without a mount after connecting this power adapter.
• You can power the Arlo device with the power adapter
even when a battery is not installed in the device.
Safety Guidelines

5
Install the Power Adapter
Note: This power adapter works with Arlo Pro, Arlo Pro 2, Arlo Go,
and Arlo Security Lights. The illustrations show Arlo Pro
cameras.
1. Choose a location to mount your
Arlo device and install the mount
first.
2. Remove the USB port cap from
the device.

6
3. Connect the cable connector to
the USB port on your device and
press in firmly.
4. Connect the other end of the
power cable to the USB power
adapter.

7
5. Place the device on the mount.
6. Connect the power adapter to
an indoor electrical outlet.
Note: If you decide to use the
device wirelessly outdoors,
insert the USB port cap back
into the USB port on the
device. The cap helps protect
the device if you place it
outdoors.

©NETGEAR, Inc., NETGEAR, the NETGEAR Logo, and Arlo are trademarks of
NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes
only.
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en
français canadien à arlo.com/docs.
(If this product is sold in Canada, you can access this document in Canadian
French at arlo.com/docs.)
For the current EU Declaration of Conformity, visit
http://kb.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
350 East Plumeria Drive
San Jose, CA 95134, USA March 2018
NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland