NETGEAR PTV1000 - Push2TV - TV Adapter User manual

Getting Started

2
Update Your Push2TV
NETGEAR recommends that you update Push2TV as new
updates may support even more wireless display devices.
1. Use your laptop or mobile device to visit
www.netgear.com/ptv and download new firmware.
2. Press and hold the Push2TV side button for 7 seconds.
3. On your laptop or mobile device, find and connect to the
Push2TV WiFi network name (SSID).
4. Open a browser and type http://192.168.3.1 in the URL bar.
5. Upload the firmware and install it.
For information about updating Intel Wireless Display software on
your laptop, visit http://www.intel.com/go/wirelessdisplayupdate.

3
Getting to Know Push2TV
Wirelessly mirror your Wi-Fi CERTIFIED Miracast™ or Intel WiDi
enabled laptop, smartphone, or tablet. Now you can enjoy photos,
videos, music, or any websites on your big-screen TV.

4
Package Contents
USB power cable
Push2TV adapter
Power adapter
(varies by country)

5
Set Up Your Adapter
Connect Push2TV to your TV and plug in the power adapter.
HDMIUSB
Tip: Push2TV can also be
powered using the USB port on
your TV.

6
Connect with Intel WiDi
To connect with Miracast devices, go to page 11.
Step 1
Turn on your TV and
select the correct HDMI
input source.
The Ready for
connection screen
displays on your TV.

7
Step 2
On your laptop, launch the Intel WiDi software.

8
Step 3
Use the Intel WiDi software to find and connect to Push2TV.

9
Step 4
The first time that you connect your laptop to Push2TV, enter the
security code on the TV in the Intel WiDi software on your laptop.

10
Congratulations
You are now displaying your laptop screen wirelessly on your TV.