NETGEAR WG111UNA - DOUBLE 108MBPS WRLS USB 2.0 User manual

202-10026-01
202-10026-01
Version 2.0
May 2004
NETGEAR, Inc.
4500 Great America Parkway
Santa Clara, CA 95054 USA
User Manual for the
NETGEAR 54 Mbps
Wireless USB 2.0 Adapter
WG111

ii
202-10026-01
Technical Support
Please refer to the support information card that shipped with your product. By registering your
product at www.netgear.com/register, we can provide you with faster expert technical support and
timely notices of product and software upgrades.
NETGEAR, INC. Support Information
Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support
information card.
E-mail: [e-mail]
Web site: www.netgear.com
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to
make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
©2004 NETGEAR, Inc. NETGEAR, the NETGEAR logo, The Gear Guy and Everybody's Connecting are
trademarks or registered trademarks of NETGEAR, Inc. in the United States and/or other countries.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or
other countries. Other brand and product names are trademarks or registered trademarks of their respective
holders. Information is subject to change without notice. All rights reserved.
May 2004
Certificate of the Manufacturer/Importer
It is hereby certified that the Model WG111v2 Wireless USB 2.0 Adapter has been suppressed in accordance with the
conditions set out in the BMPT- AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example,
test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the
notes in the operating instructions.
Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market and
has been granted the right to test the series for compliance with the regulations.
VCCI Statement
This equipment is in the Class B category (information equipment to be used in a residential area or an adjacent area
thereto) and conforms to the standards set by the Voluntary Control Council for Interference by Data Processing

202-10026-01
iii
Equipment and Electronic Office Machines aimed at preventing radio interference in such residential areas. When used
near a radio or TV receiver, it may become the cause of radio interference. Read instructions for correct handling.
FCC Information to User
This product does not contain any user serviceable components and is to be used with approved antennas
only. Any product changes or modifications will invalidate all applicable regulatory certifications and
approvals
FCC Guidelines for Human Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Declaration Of Conformity
We NETGEAR, Inc., 4500 Great America Parkway, Santa Clara, CA 95054, declare under our sole responsibility that
the model WG111v2 Wireless USB 2.0 Adapter complies with Part 15 of FCC Rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.
Regulatory Compliance Information
This section includes user requirements for operating this product in accordance with National laws for usage of radio
spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may result
in unlawful operation and adverse action against the end-user by the applicable National regulatory authority.
NOTE: This product's firmware limits operation to only the channels allowed in a particular Region or Country.
Therefore, all options described in this user's guide may not be available in your version of the product.
FCC Requirements for Operation in the United States
Radio Frequency Interference Warnings & Instructions
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following methods:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is connected

202-10026-01
iv
• Consult the dealer or an experienced radio/TV technician for help.
Modifications made to the product, unless expressly approved by NETGEAR, Inc., could void the user's right to operate
the equipment.
Export Restrictions
This product or software contains encryption code which may not be exported or transferred from the US or
Canada without an approved US Department of Commerce export license.
Europe - EU Declaration of Conformity
This product is certified for Switzerland and all EU countries. Marking by the above symbol indicates compliance with
the Essential Requirements of the R&TTE Directive of the European Union (1999/5/EC). This equipment meets the
following conformance standards: EN300 328, EN301 489-17, EN60950
Requirements For Operation in the European Community
Countries of Operation and Conditions of Use in the European Community
The user should run the client utility program provided with this product to check the current channel of operation and
confirm that the device is operating in conformance with the spectrum usage rules for European Community countries as
described in this section.
This device is intended to be operated in all countries of the European Community.
Operation Using 2.4 GHz Channels in France
The following radio channel usage limitations apply in France.
The radio spectrum regulator in France, Autorité de regulation des telecommunications (ART), enforces the following
rules with respect to use of 2.4GHz spectrum in various locations in France. Please check ART's web site for latest
This device is a 2.4 GHz low power RF device intended for
home and office use in EU and EFTA member states. In some
EU / EFTA member states some restrictions may apply.
Please contact local spectrum management authorities for
further details before putting this device into operation.
FOR HOME OR OFFICE USE
Tested to Comply
with FCC Standards
NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v2
PY3WG111V2

202-10026-01
v
requirements for use of the 2.4GHz band in France: http://www.art-telecom.fr/eng/index.htm. When operating in the
following metropolitan regions (départements) in France, this device may be operated under the following conditions:
Indoors using any channel in the 2.4-2.4835 GHz band (Channels 1-13)
Outdoors using channels in the 2.4-2.454 GHz band (Channels 1-7)
When operating outside of the following regions (départements) in France (see table below), this product must be
operated under the following conditions:
• Indoors using channels in the 2.4465-2.4835 GHz band (Channels 10-13).
• Outdoor operation not permitted.
Please refer to the ART web site for further details.
Metropolitan Regions with Eased Restrictions in 2.4GHz Band

202-10026-01
vi
Declaration of Conformity in Languages of the European Community
Finnish: Valmistaja NETGEAR, Inc. vakuuttaa täten että Radio LAN device tyyppinen laite on direktiivin 1999/5/EY
oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Dutch: Hierbij verklaart NETGEAR, Inc. dat het toestel Radio LAN device in overeenstemming is met de essentiële
eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
French: Par la présente NETGEAR, Inc. déclare que l'appareil Radio LAN device est conforme aux exigences
essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Swedish: Härmed intygar NETGEAR, Inc. att denna Radio LAN device står I överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Danish: Undertegnede NETGEAR, Inc. erklærer herved, at følgende udstyr Radio LAN device overholder de væsentlige
krav og øvrige relevante krav i direktiv 1999/5/EF.
German: Hiermit erklärt NETGEAR, Inc., dass sich dieser/diese/dieses Radio LAN device in Übereinstimmung mit den
grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet.
Italian: Con la presente NETGEAR, Inc. dichiara che questo Radio LAN device è conforme ai requisiti essenziali ed alle
altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Spanish: Por medio de la presente NETGEAR, Inc. declara que el Radio LAN device cumple con los requisitos
esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Portugese: NETGEAR, Inc. declara que este Radio LAN device está conforme com os requisitos essenciais e outras
disposições da Directiva 1999/5/CE.
Canadian Department of Communications Radio Interference
Regulations
This digital apparatus (NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v2) does not exceed the Class B limits
for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian
Department of Communications.
Canada ID: 4054A-WG111V2

Contents vii
202-10026-01
Contents
Chapter 1
About This Manual
Audience, Scope, Conventions ......................................................................................1-1
How to Use this Manual ..................................................................................................1-2
How to Print this Manual .................................................................................................1-3
Chapter 2
Introduction
About the WG111 ............................................................................................................2-1
Key Features ..................................................................................................................2-1
What’s in the Box? ..........................................................................................................2-2
A Road Map for ‘How to Get There From Here’ .............................................................2-3
Chapter 3
Basic Setup
What You Need Before You Begin ..................................................................................3-1
Verifying System Requirements ...............................................................................3-1
Observing Location and Range Guidelines ..............................................................3-2
Two Basic Operating Modes ...........................................................................................3-3
WG111 Default Wireless Configuration Settings ............................................................3-4
Basic Installation Instructions .........................................................................................3-4
For Windows XP Users Installing a WG111 .............................................................3-5
For Windows 2000 & 98SE/Me Users Installing a WG111 .......................................3-9
WG111 Wireless Connection Indicators .......................................................................3-13
Interpreting the LED on the WG111 .......................................................................3-13
Interpreting System Tray Icon Colors .....................................................................3-14
Chapter 4
Configuration
Understanding the Configuration Options ......................................................................4-1
Using Configuration Profiles ...........................................................................................4-1
Connecting to an Access Point in Infrastructure Mode ............................................4-2
How to Configure an Infrastructure Mode Profile .....................................................4-2
Connecting to Another PC in Ad Hoc Mode ...................................................................4-4

202-10026-01
viii Contents
How to Configure an Ad Hoc Mode Profile ..............................................................4-4
How to Start a Computer-to-Computer (Ad Hoc) Network .......................................4-7
Enabling Wireless Security Features ..............................................................................4-7
Identifying the Wireless Network Name (SSID) and WEP Security Settings ...........4-8
How to Configure WEP Encryption Security ............................................................4-9
How to Configure WPA-PSK Encryption Security ..................................................4-10
Networks Page .............................................................................................................4-11
Statistics Page ..............................................................................................................4-12
About Page ...................................................................................................................4-13
Advanced Settings Page ..............................................................................................4-14
Chapter 4
Troubleshooting
Basic Tips .......................................................................................................................5-1
Frequently Asked Questions ..........................................................................................5-2
The WG111 status line displays a speed lower than 54 Mbps .................................5-2
The WG111 Smart Wireless Assistant keeps asking me to save my settings ..........5-2
Ad Hoc mode is not working correctly ......................................................................5-3
How to know if the WG111 card has received a valid IP address ............................5-3
How to use Windows XP’s own Wireless Configuration Utility .................................5-3
New Hardware Wizard appears after installation has completed .............................5-3
How to get a PDF copy of the Manual .....................................................................5-4
Appendix A
Technical Specifications
Appendix B
Wireless Networking Basics
Wireless Networking Overview ...................................................................................... B-1
Infrastructure Mode ................................................................................................. B-1
Ad Hoc Mode (Peer-to-Peer Workgroup) ................................................................ B-2
Network Name: Extended Service Set Identification (ESSID) ................................ B-2
Authentication and WEP ................................................................................................ B-2
802.11 Authentication .............................................................................................. B-3
Open System Authentication ................................................................................... B-3
Shared Key Authentication ...................................................................................... B-4
Overview of WEP Parameters ................................................................................ B-5
Key Size .................................................................................................................. B-6

Contents ix
202-10026-01
WEP Configuration Options .................................................................................... B-6
Wireless Channels ......................................................................................................... B-7
WPA Wireless Security .................................................................................................. B-8
How Does WPA Compare to WEP? ........................................................................ B-9
How Does WPA Compare to IEEE 802.11i? ........................................................ B-10
What are the Key Features of WPA Security? ...................................................... B-10
WPA Authentication: Enterprise-level User
Authentication via 802.1x/EAP and RADIUS .................................................. B-12
WPA Data Encryption Key Management ........................................................ B-14
Is WPA Perfect? .................................................................................................... B-16
Product Support for WPA ...................................................................................... B-16
Supporting a Mixture of WPA and WEP Wireless Clients is Discouraged ...... B-16
Changes to Wireless Access Points ............................................................... B-17
Changes to Wireless Network Adapters ......................................................... B-17
Changes to Wireless Client Programs ............................................................ B-18
Appendix C
Preparing Your PCs for Network Access
Preparing Your Computers for TCP/IP Networking .......................................................C-1
Configuring Windows 98 and Me for TCP/IP Networking ..............................................C-1
Install or Verify Windows Networking Components .................................................C-1
Enabling DHCP in Windows 98 and Me ..................................................................C-3
Selecting Windows’ Internet Access Method ..........................................................C-5
Verifying TCP/IP Properties ....................................................................................C-5
Configuring Windows 2000 or XP for TCP/IP Networking .............................................C-6
Install or Verify Windows Networking Components .................................................C-6
DHCP Configuration of TCP/IP in Windows XP or 2000 .........................................C-7
DHCP Configuration of TCP/IP in Windows XP .....................................................C-7
DHCP Configuration of TCP/IP in Windows 2000 ..................................................C-9
Verifying TCP/IP Properties for Windows XP or 2000 ........................................... C-11
Glossary
Index

202-10026-01
xContents

User Manual for the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111
About This Manual 1-1
202-10026-01
Chapter 1
About This Manual
This chapter introduces the conventions and features of this document.
Audience, Scope, Conventions
This manual assumes that the reader has basic to intermediate computer and Internet skills.
However, tutorial information is provided in the Appendices, on the NETGEAR 54 Mbps Wireless
USB 2.0 Adapter WG111 Resource CD, and on the NETGEAR Web site.
This manual uses the following typographical conventions:
This manual uses the following formats to highlight special messages:
This manual is written according to these specifications:
Table 1. Typographical conventions
italics Emphasis.
bold times roman User input.
[Enter] Named keys in text are shown enclosed in square brackets.
SMALL CAPS DOS file and directory names.
Note: This format is used to highlight information of importance or special interest.
Table 1-1. Manual Specifications
Product Version NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111
Manual Part Number 202-10026-01
Manual Publication Date May 2004
Note: Product updates are available on the NETGEAR Web site at
www.netgear.com/support/main.asp.

User Manual for the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111
1-2 About This Manual
202-10026-01
How to Use this Manual
The HTML version of this manual includes these features.
Figure 1-1: HTML version of this manual
1. Left pane. Use the left pane to view the Contents, Index, and Search tabs.
To view the HTML version of the manual, you must have a version 4 or later browser with
JavaScript enabled.
2. Toolbar buttons. Use the toolbar buttons across the top to navigate, print pages, and more.
The Show in Contents button locates the current topic in the Contents tab.
Previous/Next buttons display the previous or next topic.
The PDF button links to a PDF version of the full manual.
The Print button prints the current topic. Using this button when a
step-by-step procedure is displayed will send the entire procedure to your
printer--you do not have to worry about specifying the correct range of pages.
3. Right pane. Use the right pane to view the contents of the manual. Also, each page of the
manual includes a link at the top right which links to a PDF file
containing just the currently selected chapter of the manual.
12
3

User Manual for the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111
About This Manual 1-3
202-10026-01
How to Print this Manual
To print this manual you can choose one of the following several options, according to your needs.
•Printing a “How To” Sequence of Steps in the HTML View. Use the Print button on the
upper right of the toolbar to print the currently displayed topic. Using this button when a
step-by-step procedure is displayed will send the entire procedure to your printer--you do not
have to worry about specifying the correct range of pages.
•Printing a Chapter. Use the link at the top right of any page.
– Click “PDF of This Chapter” link at the top right of any page in the chapter you want to
print. A new browser window opens showing the PDF version of the chapter you were
viewing.
– Click the print icon in the upper left of the window.
–Tip: If your printer supports printing two pages on a single sheet of paper, you can save
paper and printer ink by selecting this feature.
•Printing the Full Manual. Use the PDF button in the toolbar at the top right of the browser
window.
– Click PDF button. A new browser window opens showing the PDF version of the chapter
you were viewing.
– Click the print icon in the upper left of the window.
–Tip: If your printer supports printing two pages on a single sheet of paper, you can save
paper and printer ink by selecting this feature.

User Manual for the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111
1-4 About This Manual
202-10026-01

User Manual for the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111
Introduction 2-1
202-10026-01
Chapter 2
Introduction
This chapter introduces the features, package contents, and appearance of the NETGEAR 54 Mbps
Wireless USB 2.0 Adapter WG111.
About the WG111
The NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111 gives you ultimate mobility in your
office or while you are traveling. It frees you from traditional Ethernet wiring and helps you create
a wireless network for sharing your broadband Internet access among multiple PCs in and around
your home. It is designed for PC computers running Microsoft®Windows®. It is a USB 2.0 device
and is backwards compatible with USB 1.1 ports.
Its auto-sensing capability allows high packet transfer at up to 54 Mbps for maximum throughput
or dynamic range shifting to lower speeds due to distance or operating limitations in an
environment with a lot of electromagnetic interference.
The WG111 Wireless USB 2.0 Adapter provides reliable, standards-based 802.11g 54 Mbps
WLAN connectivity that is protected with industry-standard security. It works with Windows
98SE, Me, 2000, and XP operating systems.
Key Features
The WG111 Wireless USB 2.0 Adapter provides the following features:
• Reliable IEEE 802.11g and b standards-based wireless technology.
• 54 Mbps high speed data transfer. Wireless nodes negotiate to operate in the optimal data
transfer rate. In a noisy environment or when the distance between the wireless nodes is far,
the wireless nodes automatically fall back to operate at lower transfer rates.
• High level of data encryption using128-bit Shared Key WEP data encryption method. A lower
level of data encryption or no data encryption is available to simplify your network setup or to
improve data transfer rate.
• WPA PSK (Wi-Fi Protected Access Pre-Shared Key) support.

User Manual for the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111
2-2 Introduction
202-10026-01
What’s in the Box?
The product package should contain the following items:
• NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111
• Installation Guide for the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111
•NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111 Resource CD, including:
— Driver and Wireless Assistant Software
— User Manual for the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111
— Animated Network Properties Configuration Tutorial
— PC Networking Tutorial
• Warranty and Support information card
• A plastic cradle to hold the WG111
• Velcro fasteners to attach the WG111 to the plastic cradle
• A USB adapter cable
Figure 2-1: NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111 Box contents
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the product for repair.
WG111 Resource CD, Installation guide and
Warranty/Support intormation card
WG111 54 Mbps Wireless
USB 2.0 Adapter
Velcro
Cradle
USB Cable

User Manual for the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111
Introduction 2-3
202-10026-01
A Road Map for ‘How to Get There From Here’
The introduction and adoption of any new technology can be a difficult process. Wireless
technology has removed one of the barriers to networking—running wires. It allows more people
to try networking while at the same time exposes them to the inherent complexity of networking.
General networking concepts, setup, and maintenance can be difficult to understand. In addition,
wireless technology adds issues, such as range, interference, signal quality, and security to the
picture.
To help overcome potential barriers to successfully using wireless networks, the table below
identifies how to accomplish such things as connecting to a wireless network, assuring appropriate
security measures are taken, browsing the Internet through your wireless connection, exchanging
files with other computers and using printers in the combined wireless and wired network.
Table 2-1. A Road Map for How to Get There From Here
If I Want To? What Do I Do? What’s Needed? How Do I?
Connect to a
wireless
network
1. Identify the
wireless network
name (SSID) and,
if used, the
wireless security
settings.
2. Set up the
NETGEAR 54
Mbps Wireless
USB 2.0 Adapter
WG111 with the
settings from step
1.
1. A wireless network
2. A PC within the operating
range of the wireless
network. For guidelines
about the range of
wireless networks, see
“Observing Location and
Range Guidelines” on
page 3-2.
To set up the WG111, see
Chapter 3, “Basic Setup” and
follow the instructions provided.
To learn about wireless
networking technology, see
Appendix B, “Wireless
Networking Basics” for a
general introduction.

User Manual for the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111
2-4 Introduction
202-10026-01
Protect my
wireless
connection from
snooping,
hacking, or
information
theft.
1. Assure that the
wireless network
has security
features enabled.
2. Configure my
WG111 with the
security settings of
the wireless
network.
3. Use Windows
security features.
1. A wireless network with
authenticationandWEPor
WPA encryption enabled.
2. Wireless networking
equipment that supports
WEP encryption, such as
the WG111 and all
NETGEAR wireless
networking products.
To learn about wireless
networking security, see
“Authentication and WEP” on
page B-2 and “WPA Wireless
Security” on page B-8.
To use WEP security features,
see “Enabling Wireless Security
Features” on page 4-7 and
configure your WG111
accordingly.
To use WPA-PSK security
features, see “How to Configure
WPA-PSK Encryption Security”
on page 4-10.
Note: Secure Internet sites such as banks and online merchants use encryption security built into browsers
like Internet Explorer and Netscape. Any wireless networking security features you might implement are in
addition to those already in place on secure Internet sites.
Connect to the
Internet over my
wireless
network.
1. Activate my
wireless link and
verify my network
connection.
2. Open an Internet
browser such as
Internet Explorer
or Netscape
Navigator.
1. An active Internet
connection like those from
cable or DSL service
providers.
2. A wireless network
connected to the cable or
DSL Internet service
through a cable/DSL
router as illustrated in
“Connecting to an Access
Point in Infrastructure
Mode” on page 4-2.
3. TCP/IP Internet
networking software
installed and configured
on my PC according to the
requirements of the
Internet service provider.
4. A browser like Internet
Explorer or Netscape
Navigator.
To configure your WG111 in
Infrastructure Mode, see “Basic
Installation Instructions” on
page 3-4, and locate the section
for your version of Windows.
For assistance with configuring
the TCP/IP Internet software on
a PC, see “Preparing Your
Computers for TCP/IP
Networking”on page C-1 or refer
to the PC Networking Tutorial on
the NETGEAR 54 Mbps
Wireless USB 2.0 Adapter
WG111 Resource CD and the
Help information provided in the
Windows system you are using.
.
Table 2-1. A Road Map for How to Get There From Here
If I Want To? What Do I Do? What’s Needed? How Do I?

User Manual for the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111
Introduction 2-5
202-10026-01
Exchangefiles
between a
wirelessly
connected PC
and other
computers in a
my combined
wireless and
wired
network.
1. Use the Windows
Network
Neighborhood
feature to browse
for computers in
the combined
wireless and wired
network.
2. Browse the hard
drive of the target
computer in the
network in order to
locatethedirectory
or files you want to
work with.
3. Use the Windows
Explorer copy and
paste functions to
exchange files
between the
computers.
1. The PC I am using to
connect to the wireless
network needs to be
configured with the
Windows Client and File
and Print Sharing.
2. The PC I am using to
connect to the wireless
network needs to be
configured with the same
Windows Workgroup or
Domain settings as the
other Windows computers
in the combined wireless
and wired network.
3. Any Windows networking
security access rights
such as login user name/
password that have been
assigned in the Windows
network or for sharing
particular files must be
provided when Windows
prompts for such
information.
4. If so-called Windows
‘peer’ Workgroup
networking is being used,
the drive, file system
directory, or file need to be
enabled for sharing.
For assistance with Windows
networking software, see
“Preparing Your Computers for
TCP/IPNetworking”on page C-1
for configuration scenarios or
refer to the Help system included
with your version of Windows.
Windows Domain settings are
usually managed by corporate
computer support groups.
Windows Workgroup settings
are commonly managed by
individuals who want to set up
small networks in their homes, or
small offices.
For assistance with setting up
Windows networking, refer to the
PC Networking Tutorial on the
NETGEAR 54 Mbps Wireless
USB 2.0 Adapter WG111
Resource CD and the Help
information provided in the
Windows system you are using.
Table 2-1. A Road Map for How to Get There From Here
If I Want To? What Do I Do? What’s Needed? How Do I?

User Manual for the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111
2-6 Introduction
202-10026-01
Use printers in
a combined
wireless and
wired
network.
1. Use the Windows
Printers and Fax
features to locate
available printers
in the combined
wireless and wired
network.
2. Use the Windows
Add a Printer
wizard to add
access to a
network printer
from the PC you
are using to
wirelessly connect
to the network.
3. From the File
menu of an
application such
as Microsoft Word,
use the Print
Setup feature to
direct your print
output to the
printer in the
network.
1. The PC I am using to
connect to the wireless
network needs to be
configured with the
Windows Client and File
and Print Sharing.
2. The PC I am using to
connect to the wireless
network needs to be
configured with the same
Windows Workgroup or
Domain settings as the
other Windows computers
in the combined wireless
and wired network.
3. Any Windows networking
security access rights
such as login user name/
password that have been
assigned in the Windows
network must be provided
when Windows prompts
for such information.
4. If so-called Windows
‘peer’ networking is being
used, the printer needs to
be enabled for sharing.
Windows Domain settings are
usually managed by corporate
computer support groups.
Windows Workgroup settings
are commonly managed by
individuals who want to set up
small networks in their homes, or
small offices.
For assistance with setting up
Windows networking, refer to the
PC Networking Tutorial on the
NETGEAR 54 Mbps Wireless
USB 2.0 Adapter WG111
Resource CD and the Help
information provided in the
Windows system you are using.
For assistance with setting up
printers in Windows, refer to the
Help and Support information
that comes with the version of
the Windows operating systems
you are using.
Table 2-1. A Road Map for How to Get There From Here
If I Want To? What Do I Do? What’s Needed? How Do I?