Statement of Conditions
In the interest of im roving internal design, o erational function, and/or reliability, NETGEAR reserves the right to
make changes to the roducts described in this document without notice. NETGEAR does not assume any liability
that may occur due to the use or a lication of the roduct(s) or circuit layout(s) described herein.
Certificate of the Manufacturer/Importer
It is hereby certified that the Model PS101 Mini Print Server has been su ressed in accordance with the conditions set
out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992.The o eration of some equi ment (for exam le, test
transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the
notes in the o erating instructions. Federal Office for Telecommunications A rovals has been notified of the lacing
of this equi ment on the market and has been granted the right to test the series for com liance with the regulations.
VCCI Statement
This equi ment is in the Class A category (information equi ment to be used in a residential area or an adjacent area
thereto) and conforms to the standards set by the Voluntary Control Council for Interference by Data Processing
Equi ment and Electronic Office Machines aimed at reventing radio interference in such residential areas. When used
near a radio or TV receiver, it may become the cause of radio interference. Read instructions for correct handling.
Federal Communications Commission (FCC) Com liance Notice: Radio Frequency Notice
This device com lies with art 15 of the FCC Rules. O eration is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must acce t any interference received, including interference that may cause undesired o eration.
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the CC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures: (1) Reorient or relocate the receiving antenna, (2)
Increase the separation between the equipment and receiver, (3) Connect the equipment into
an outlet on a circuit different from that to which the receiver is connected, (4) Consult the
dealer or an experienced radio/TV technician for help.
EN 55 022 Statement
This is to certify that the Model PS101 Mini Print Server is shielded against the generation of radio interference in
accordance with the a lication of Council Directive 89/336/EEC, Article 4a. Conformity is declared by the
a lication of EN 55 022 Class A (CISPR 22). Com liance is de endent u on the use of shielded data cables.
Canadian Department of Communications Radio Interference Regulations
This digital a aratus (Model PS101 Mini Print Server) does not exceed the Class A limits for radio-noise emissions
from digital a aratus as set out in the Radio Interference Regulations of the Canadian De artment of
Communications.
Règlement sur le brouillage radioélectrique du ministère des Communications
Cet a areil numérique (Model PS101 Mini Print Server) res ecte les limites de bruits radioélectriques visant les
a areils numériques de classe A rescrites dans le Règlement sur le brouillage radioélectrique du ministère des
Communications du Canada.
A ril 2002 13