NETGEAR FSM7326P - ProSafe Managed Switch User manual

FSM7326P L3 Managed 10/100
Switch with PoE
24+2 Layer 3 Switch with Power-over-Ethernet
Accessible
Scalable
Advanced
Versatile
• Help is here when you need it!
NETGEAR provides 24x7 technical
support* in English, with selected
local language support during office hours.
Layer 3 Managed Switching with In-Line Power
Maximize your 10/100 network. The NETGEAR®FSM7326P Switch features Power-over-Ethernet
(PoE), which optimizes the installation and power management of network devices such as wireless
access points (AP), Voice over IP (VoIP) phones, and security video cameras. Power-over-Ethernet
(IEEE 802.3af) capabilities reduce installation costs for many new network productivity devices. It
frees your wireless AP deployment from restrictions due to power outlet locations. Power and data
switching are integrated into one unit and delivered over a single cable, eliminating costs for
additional AC wiring and reducing installation time.
The FSM7326P Layer 3 provides both Layer 2 and Layer 3 managed switching functionality,
including routing, switching, and quality of service (QoS) feature sets. It can be used to provide
new IP-based services:
• Multiple VLANs, QoS, bandwidth limiting, and access control features enable smooth, clear
VoIP telephony and video conferencing
• Subnetting and strong, standards-based security protocols isolate wireless APs and video
surveillance equipment, protecting critical data from potential abuse
• IP subnetting and gigabit ports provide dedicated high-speed links to servers and
network backbones
Affordable and reliable, the FSM7326P’s robust feature set is ideal for small and growing
businesses that want to get the most out of their networks.
The FSM7326P Managed Switch is easy to set up and use, with an intuitive browser interface for simple
configuration and management of both data and power. Secure, remote management capabilities enable
outsourced network operations and reduce the need for onsite administration and service calls.
Out-of-the-box, it’s configured as an easy-to-use, unmanaged Fast Ethernet switch with PoE. The advanced routing
and switching capabilities are there when you need them — maximizing network bandwidth and utility.
Layer 2, 3, and 4 capabilities offer superior network performance, security, and control. Multiple VLAN support,
wire speed routing to offload expensive routers, resiliency, and redundancy enable you to optimize your network so
that all users and applications get the throughput they need, without affecting critical applications.
Enhances data networking and enables new network applications such as voice and video. A comprehensive set of
Layer 3 features enhances functionality in any network. An essential component for feature-rich networks, the
FSM7326P helps maximize your network capabilities — and your return on investment.

4500 Great America Parkway
Santa Clara, CA 95054 USA
Phone: 1-888-NETGEAR (638-4327)
E-mail: [email protected]
www.NETGEAR.com
©2004NETGEAR, Inc. NETGEAR®, the Netgear
logo, ProSafe, Everybody’s connecting,
and Auto Uplink are trademarks or registered
trademarks of NETGEAR, Inc. in the United
States and/or other countries. Other brand and
product names are trademarks or registered
trademarks of their respective holders.
Information is subject to change without notice.
All rights reserved.
* Free basic installation support provided
for 90 days from date of purchase; optional
premium support available.
†Optional NETGEAR AGM731F SFP GBIC SX
module for 1000BASE-SX connections or
AGM7322F SFP GBIC LX module for
1000BASE-LX connections.
D-FSM7326P-1
bd
Technical Specifications
•Network Protocol and Standards
Compatibility:
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3z 1000BASE-SX
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3x Flow Control
- IEEE 802.3af DTE Power via MDI
•Management Specifications:
- IEEE 802.1x Port Based Network
Access Control
- IEEE 802.1Q Static VLAN (Up to 228)
- IEEE 802.1p Class of Service (CoS)
- IEEE 802.3ad Link Aggregation Control
Protocol (LACP)
- IEEE 802.1v Protocol VLAN & Port VLAN
- IEEE 802.1D SpanningTree Protocol
- IEEE 802.1w Rapid SpanningTree
- IEEE 802.3s Multiple SpanningTree
- RFC 768 UDP
- RFC 854-859 Telnet
- IGMP Snooping Support
- Port Mirroring Support
- RFC 951, 1532 BootP
- RFC 1157 SNMP
- RFC 1757 RMON groups 1, 2, 3, and 9
- RFC 1213 MIB II
- RFC 1583 OSPF v2
- RFC 1643 Ethernet Interface MIB
- RFC 1724 RIP v2 MIB
- RFC 1850 OSPF v2 MIB
- RFC 1902, 1903, 1904, 1905, 1906,
1907 SNMP v2
- RFC 1757, 2021 Remote MIB v2
- RFC 2096 IP Forwarding Table MIB
- RFC 2131, 2132 DHCP and BootP
- RFC 2233 Interfaces Group MIB – SMIv2
- RFC 2236 IGMP v2
- RFC 2328 OSPF v2
- RFC 2338, 2787 Virtual Router Redundancy
Protocol (VRRP)
- RFC 1057, 2453 RIP v1, v2
- RFC 2474 Differentiated Fields – IPv4 in
IPv6 Headers
- RFC 2597 Assured Forwarding PHB
- RFC 2737 Entity MIB v2
- RFC 2865 RADIUS
- RFC 2475, 2998 DiffServ
- RFC 3046 DHCP Relay
- Private Enterprise MIB
- Broadcast Storm Protection
- Layer 3/4 aware Access Control List (48 bit)
•System Parameters:
- Number of MAC addresses 8K
- Number of VLANs 228
- Maximum VLAN ID 4069
- Number of 802.1p traffic classes 4
- Number of trunks 6
- Number of routes 16
- Number of routed VLANs 6
- Number of ARP entries 2047
- Number of ACL rules (and entries) 100 rules
with 10 entries/rule
- Number of queues used for DiffServ 2
- Maximum rules per class 8
- Maximum instances per policy 10
- Maximum attributes per instance 8
- Maximum service interfaces 16
•User Interfaces:
- Command Line Interface
- Web-based management
•Physical Interfaces:
- 24 RJ-45 In-Line Power connectors for
10BASE-T and 100BASE-TX (end-span)
- Two RJ-45 combo connectors for
10BASE-T, 100BASE-TX, and 1000BASE-T.
Optional SFP GBIC slots for fiber connections
- RPS Connector for optional alternative power
•LEDs:
- Per port: Speed, Link, Activity
- Per device: Power, Maximum PoE Power
supplied, RPS Status
•Performance Specifications:
- Forwarding modes: Store-and-forward
- Bandwidth: 8.8 Gbps (non-blocking)
- Switch latency: Less than 20 microseconds for
64-byte frames
- System memory: 128 MB
- Packet buffer memory: 32 MB
- Code Storage (Flash):16 MB
- Acoustic noise: (ANSI-S10.12) 45dB
- Heat Dissipation: 18.99 Btu/hr
- MeanTime Between Failure (MTBF):
58300 hours (~6.5 years)
•Electrical Specifications:
- Power Consumption: 36 W maximum
- 100-127/200-240 VAC; 50-60 Hz universal inputs
- 802.3af power budget: 170 watts. Full power for
up to 12 ports, or up to 7 watts for 24 ports
•Physical Specifications:
- W: 440 mm (17.32 inches)
- D: 385 mm (15.16 inches)
- H: 43 mm (1.7 inch)
•Environmental Specifications:
- Operating temperature: 0 to 40°C
- Storage temperature: -20 to 70°C
- Operating humidity: 90% maximum relative
humidity, non-condensing
- Storage humidity: 95% maximum relative
humidity, non-condensing
- Operating altitude: 10,000 ft (3,000 m)
maximum
- Storage altitude: 10,000 ft (3,000 m) maximum
•Electromagnetic Emissions:
- CE mark, commercial
- FCC Part 15 Class A
- VCCI Class A
- EN 55022 (CISPR 22), Class A, Class A EN 50082-1
- C-Tick
•Electromagnetic Immunity:
- EN 50082-1
- EN 55024
•Safety:
- CE mark, commercial
- CSA certified (CSA 22.2 #950)
- TUV licensed (EN 60 950)
- UL listed (UL 1950)/CUL IEC950/EN60950
•Warranty:
- NETGEAR Limited Lifetime warranty
Package Contents
- FSM7326P Layer 3 Managed Switch with
In-Line Power
- Null modem cable
- Rack-mount kit
- Resource CD with User's Manual
FSM7326P Managed Gigabit Switch
UL
®
NETGEAR Related Products
- AGM731F 1000Base-SX SFP
GBIC module (LC connector)
- AGM732F 1000Base-LX SFP
GBIC module (LC connector)
- NETGEAR WG302
- NETGEAR Redundant
Power supply