NetSuite L-FT765PCO-A User manual

June 16 （生产日期） Made in China 1/ 3
ASSEMBLY INSTRUCTIONS
ITEM# L-FT765PCO-A
WARNINGS AND CAUTIONS:
FOR OUTDOOR USE ONLY! Burning charcoal inside can kill you. It gives off carbon monoxide, which has no odor.
NEVER burn charcoal inside, vehicles or tents.
NEVER LEAVE FIRE UNATTENDED!
The charcoal fire pit is HOT! DO NOT TOUCH or allow children to play near the Fire Pit when it is in use. Hot embers
can fly out of the basin in breezy conditions. A fire extinguisher should be readily available.
When the fire pit is in use, the handle on the mesh screen can reach extreme temperatures that can cause serious injury to
an unprotected hand. Use a poker or an appropriate heat resistant glove or pad when handling.
To avoid destroying the finish, please handle the surface by using a soft cloth instead of your bare hands.
DO NOT TOUCH the surface of the iron fire grate or the Fire Bowl while in use, as burns may result.
CARBON MONOXIDE HAZARD!
This unit has been designed to burn charcoal or untreated wood only. DO NOT use gasoline or kerosene to light your
fire.
DO NOT use on wood deck.
DO NOT use in the vicinity of flammable objects.
DO NOT use this Fire Pit as a cooking appliance. This Fire Pit is not designed to be used for grilling food.
IMPORTANT: For technical assistance on assembly or replacement parts, you can call us toll-free at 1-866-578-6569
from 8 a.m. EST to 8 p.m. PST or email to [e-mail] or visit www.sunjoyonline.com to place your
order or fax your parts replacement order form together with your purchase receipt to 1-740-283-3549 for assistance.
WARNING: Fuels used in wood or charcoal burning appliances, and the products of combustion of such fuels, contain
chemicals known to cause cancer, birth defects or other reproductive harm.

June 16 （生产日期） Made in China 2/ 3
Parts List
Part# Description QTY
A Handle 1
B Fire screen 1
C Grate 1
D Fire bowl 1
E Ash catcher 1
F Slate top 1
G Tiki panel 4
H Poker 1
AA Flanged nut M6 1
BB Bolt M5*10 3
CC Flanged nut M5 3
DD Bolt M6*35 8
EE Bolt M6*20 4
FF Nut M6 8
GG Flat washer 20
HH Wrench M5/M6 1
Tools Required for Assembly: Wrench (Included) and Philips Screwdriver (Not included)
Assembly instructions:
Step 1: Connect handle (A) and fire screen (B), tighten with
flanged nut (AA). Step 2: Connect ash catcher (E) and fire bowl (D), tighten with bolt (BB) and flanged nut (CC).

June 16 （生产日期） Made in China 3/ 3
LIMITED WARRANTY:
This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item
provided the item is maintained with care and used only for personal, residential purposes.
The item is warranted to be free from defects in material or workmanship for a period of 6 months. If any defect is found,
please call our customer service department at 1-866-578-6569 for help. The manufacturer will not cover transportation or
delivery costs, or compensate the individual or any outside party for assembling or disassembling the product. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
CARE & MAINTENANCE:
1. Before using, clean the product completely with a soft dry towel.
2. To extend the life of your fire pit, clean the bowl after each use and cover the unit to protect it from the elements, cover is
not included. Due to natural properties of steel material, if rust develops, please clean rust area by sanding slightly, then
wipe thoroughly and apply touch-up paint if possible.
Step 4: Put slate top (F) upside down on a soft,
non-abrasive surface, connect assembled tiki panel base to
slate top (F) with bolt (EE) and washer (GG). Tighen all
bols at this step.
Step 5: Turn over the whole assembled piece. Place Fire bowl (D),
Grate (C) and Fire screen (B) in order. Use Poker (H) as necessary.
Now, your firepit is perfect ready for use.
Step 3: Connect Tiki panel (G) together with bolt (DD),
flat washer (GG) and nut (FF). Please do not tighten the
bolt at this step.