Eldorado Stone eldoroda User manual

Artisan Fire Bowls
Assembly Guide

2
ARTISAN FIRE BOWLS
Step 5
• Position Bowl into final location
• Cut nylon strap and remove
• Cut wire to allow for fixed gas pipe to enter
bottom of bowl
Step 4
• Use the provided nylon straps to lift bowl
and position into final installation space
Step 3
• Remove lava rock from fire bowl base
Step 2
• Remove gas key, do not discard
• Lift burner assembly, but do not disconnect
Step 1
• Carefully unpack Fire Bowl
• Review all HPC Burner Instructions & Warnings
before installation
• Leave nylon straps in place for carrying bowl
to position

3
ARTISAN FIRE BOWLS
Step 7
• Apply provided lava rock evenly over burner
• Review all warnings for using alternative media in the
HPC Operating Instructions
• Follow all HPC, Hearth Products Controls Installation
& Operating Instructions before operating burner
Step 6
• Connect flex line from fixed piping (not included)
• Insert key valve located on side of bowl
• Follow all HPC, Hearth Products Controls Installation
Instructions
• Follow all HPC, Hearth Products Controls Installation and Operating
Instructions before operating fire bowl burner unit.
• Do not overheat fire bowl by burning flame over 12" high.
• Do not operate in excessively windy conditions.
• We suggest that our products be installed by professionals that are locally
licensed by the authority having jurisdiction in gas piping.
• Carefully follow all included instructions and local building codes to
prevent personal injury or property loss.
FIRE BOWL OPERATIONAL WARNINGS

800.925.1491 eldoradostone.com/outdoor
©2013 Eldorado Stone, LLC071213