nevins Leaf living walls User manual

iving walls
TM
room divider assembly guide
iving walls
TM

2
Leaf Room Divider Assembly Guide
iving walls
TM
Table of Contents
Page
Leaf Room Divider Components ------------------------------------------------
Tools Required ---------------------------------------------------------------------
Assembly Instructions ------------------------------------------------------------
3
4
4

3
Leaf Room Divider Assembly Guide
iving walls
TM
Leaf Room Divider Components
Base Frame (1)
Poles (2)
M10 x 1.5 x 40 (4) M8 x 1.25 x 65
Two Sided (8)
M8 x 1.25 x 45
One Sided (8)
M8 x 1.25 (8)
M8 x 1.25 x 45
2 Sided (16)
1 Sided (8)

4
Leaf Room Divider Assembly Guide
iving walls
TM
Tools Required
Assembly Instructions
Ratchet
17mm socket
13mm socket
13mm wrench
Step 1: Screw on wheels/leg levelers until snug
Step 2: Bolt on the polls using M10 x 1.5 x 40 bolts provided and a 17mm socket

5
Leaf Room Divider Assembly Guide
iving walls
TM
Step 3: Connect the grids using provided hardware. See components section for which
hardware to use. Cut grid goes on top.
Step 4: Place the base cover over the base frame.
Step 5: Attach drains and leaf screens to trays.
Step 6: Place trays on grid in #4 slots starting from the bottom and working up. The
bottom tray should not have drains.
Step 7: Install side panels using connectors
Step 8: Plant room divider
Step 9: Water room divider