New Age Pro Series User manual

PRO SERIES WORKBENCH
Warning: Excessive weight hazard!
Use two or more people to move, assemble or install workbench to avoid back injury.
Do not leave children unattended near cabinets.
For assistance, call 1.877.306.8930; for UK 0800.031.4069; e-mail at [e-mail]
66"x 24"
(1676mm x 610mm)

66" x 24"
(1676mm x 610mm)
Workbench
1
1
2
8
14
Wood Screws (M4 x 16mm)
Hex Bolt ( M8 x 60mm)
Lock Washer (M8)
16
Washer (M8)
4
4
8
4
14mm Hex Head
Hex Bolt ( M8 x 16mm)14mm Hex Head
Hex Lock Nuts (M8) - 14mm Hex Head
Worktop
Leg Assembly
Horizontal Support
Leg Post with Adjustable Feet
1
Underside Bracket
2
Phillips Head Bolt (M5 x 10mm)
Parts Supplied
Unpacking
• Begin by placing the package on a protected at surface.
• Remove all cardboard, foam packaging material and clear plastic bags.
• Dispose / recycle all packaging materials.
• Verify all the contents in the box and gather the required tools. See“Parts”and “Tools Needed” in the list below.
Rated Weight Capacity 60" x 18" Workbench
(2133mm x 457mm)
2000lbs/ 907 kg
Evenly Distributed Weight Capacity
14 x Screws
(M4 x 16mm)
2 x Leg Assembly 1 x Horizontal Beam 4 x Leg Post
4 x Lock
Washer
(M8)
8 x Lock
Nut
(M8)
16 x
Washer
(M8)
4 x Hex Bolt
(M8 x 16mm) 8 x Hex Bolt (M8 x 60mm)
1 x Worktop 1 x Underside
Bracket
2 x Phillips
Head Bolt
(M5 x 10mm)

Manufacturer Warranty Limited Lifetime
1. Service calls to correct the installation of any NewAge products or to instruct you how to use or install them.
2. Damage resulting from improper handling or shipping of products, or products damaged by accident, misuse, abuse, re,
ood, improper installatin, acts of God, neglect, corrosion, modication, mishandling or not following care instuctions.
3. Products damaged by improperly loading beyond the specied maximum weight capacity outlined in the instrutions provided
with the product.
4. Repairs or replacement when your product is used in other than normal, single-family household use, such as a commerical
environment, or handled in anyway inconsistent with the installation instructions included with the product.
5. Cosmetic damge, including scratches, dings, dents or cracks in paint that do not aect the structual or functional capability
of the product.
6. Surfaces damaged due to chemcal interaction resulting in corrosion of paint or metal.
7. Replacement parts for NewAge products outside Canada and the United States, U.K.
8. Loss of product contents due to theft, re, ood, accident or acts of God.
9. Shipping or freight fees to deliver replacement products or to return defective products.
10. Any labor costs during the limited warranty period.
When this product is installed, operated and maintained according to the instructions attached to or furnished with the product,
NewAge Products Inc. will replace the defective product or parts if the part fails as a result of defective materials or workmanship
for the Lifetime of the product.
NEWAGE PRODUCTS INC. WILL NOT PAY FOR:
IMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED
TO ONE YEAR, OR THE SHORTEST PERIOD ALLOWED BY LAW. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS OR EXCLUSIONS
ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE
TO STATE OR PROVINCE TO PROVINCE
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
Tools Needed
1 x #2 Phillips Bit
(optional)
1 x Tape Measure
1 x Flashlight
1 x 24” Level
1 x 14mm socket 1 x Socket wrench
1 x Cordless Power Drill
1 x Adjustable wrench
1 x 14 mm
Open end wrench
1 x #2 Phillips head
screwdriver 1 x 3mm or 1/8”Drill Bit

Frame Assembly
Center frame on bottom side of
worktop 2"(50.8mm) in from ends
and 1"(25.4mm) in from back edge.
Insert leg posts at desired height and
secure using M8 x 60mm bolts, nuts,
and washers provided.
Pre-drill holes and secure frame to
worktop using M4 x 16mm screws
provided.
Stand and level workbench
2”(50.8mm)
1”
(25.4mm)
Side
End
Attach horizontal beam to leg
assembly using M8 x 16mm bolts
and M8 lock washers.
56
Thank you for purchasing a NewAge Product! Please give us a call or visit online if you have any questions.
Call 1.877.306.8930; for UK 0800.031.4069; e-mail at [email protected]om
3
2
1
Attach the underside bracket to the horizontal
beam using the M5 x 10mm Phillips head bolts.
Pre-drill holes and secure underside support to
worktop using three M4 x 16mm screws.
4