
INSTRUCTIONS FOR:
TOPCHEST/ROLLCAB/ADD-ON CHEST
WITH BALL BEARING RUNNERS - GREEN
MODEL No's: AP26059TBRG/AP26479TBRG/AP26029TBRG
1.1. GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and
general workshop practice regulations are adhered to when
using these units.
Locate the units in a suitable work area.
Keep the work area clean, uncluttered and ensure there is
adequate lighting.
WARNING! Use the Rollcab on level and solid ground,
preferably concrete.
Keep the units clean and tidy in accordance with good
workshop practice.
Keep children and unauthorised persons away from the work
area.
DO NOT use these units for any purpose other than that
for which they are designed.
DO NOT use the units outdoors.
DO NOT place the units in a damp or wet location or an
area where there is condensation.
DO NOT clean the units with any solvents which may
damage the surfaces or the protective coating.
DO NOT move the units with the drawers out. To avoid
tipping, open one drawer at a time and close and secure all
drawers whilst moving.
DO NOT step on the drawers.
DO NOToverload the drawers, weight limit per drawer is
36kg.
•All designed to take our modular tool trays.
•All heavy gauged steel construction and manufactured with
steel inner walls for extra strength and durability.
•Heavy-duty 45mm ball bearing drawer runners provide superior
performance and carry heavier loads.
• Fullheightrearlockingmechanism,locksfull-lengthdrawersin
multiple locations.
• Addedsecurityprovidedbytumblerlocks,suppliedwithtwo
folding keys.
• Rustandsolventresistantpowdercoatpaintnish.
• TherollcabisttedwithfourØ125mmrubberwheels,two
swivelcastorswithlargetoelocksandtwoxedwheels.
•Topchest features heavy-duty side handles.
• Rollcabfeaturesahigh,polishedchromehandleforcomfort
and control when manoeuvring.
• Rollcabsuppliedwitha6mmthicktopmattoprotecttop
surface from scratching.
• Drawersfeaturestylishaluminiumdrawerpullsandnon-slip
liners.
Model No. AP26479TBRG AP26059TBRG AP26029TBRG
OverallSizeWxDxH(mm): 685x465x995mm 660x435x490mm 670x440x210mm
MediumDrawer(x5): 533x398x60mm 533x398x60mm (2x)533x398x60mm
LargeDrawer(x2): 533x398x160mm
Original Language Version AP26059TBRG,26479TBRG,26029TBRGIssue:1-12/06/14
© Jack Sealey Limited
AP26479TBRG
AP26059TBRG
AP26029TBRG
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
1. SAFETY
2. INTRODUCTION
3. SPECIFICATION