New Classic Furniture ANDOVER B677-315 User manual

ASSEMBLY INSTRUCTIONS
B677-315 ANDOVER 5/ 0 Q HEADBOARD, FOOTBOARD & SLATS
B677-335 ANDOVER 5/ 0-6 /6 Q/EK SIDE RAILS
B677-415 ANDOVER 4/6 F HEADBOARD, FOOTBOARD & SLATS
B677-535 ANDOVER 3/ 3-4 /6 T/F SIDE RAILS
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts, which
may have come loose inside the carton during shipment. Identify and count all items and compare with the parts list
and/or hardware list shown below.
PARTS LIST
ITEM DRAWING DESCRIPTION QTY
AHEADBOARD 1 PC
BFOOTBOARD
SLAT SUPPORT
GWOODEN SLAT
SIDE RAIL
C
E
F
1 PC
2 PCS
4 PCS
4 PCS
1 PC
1 PC
D
1
C.S.K SCREW
(M4) 4 x1 1/4"
HARDWARD LIST
ITEM DRAWING DESCRIPTION QTY
8 PCS
2
4 PCS
3
Spring Washer
M8 x 5/8" 4 PCS
4
Flat Washer
M8 x 5/8" x 1/8" 4 PCS
5
1 PC
JCBB (M8)
8 x 1 3/8"
ALLEN KEY M5
5 x 1 3/8" x 2 1/2"
Assemble the LSF Headboard Leg (C) and RSF
Headboard Leg (D) to the Headboard (A) by using Allen
Key (4) with hardware 1,2 and 3.
COMPLETED
ASSEMBLY
NOTE:MUST TIGHTEN SCREW PERIODICALLY.WITH USE SCREWS WILL
BECOME LOOSE CHECK THIGHT OF ALL SREWS EVERY 6-8 WEEKS.
LEFT SIDE FACING (LSF)
HEADBOARD LEG
STEP 1
MADE IN MALAYSIA
PAGE 1 OF 3
RIGHT SIDE FACING (RSF)
HEADBOARD LEG
C
DR
A
BACK VIEW
1+2+3
4
4x
L

ASSEMBLY INSTRUCTIONS
B677-315 ANDOVER 5/ 0 Q HEADBOARD, FOOTBOARD & SLATS
B677-335 ANDOVER 5/ 0-6 /6 Q/EK SIDE RAILS
B677-415 ANDOVER 4/6 F HEADBOARD, FOOTBOARD & SLATS
B677-535 ANDOVER 3/ 3-4 /6 T/F SIDE RAILS
1
2
3
Important !!
LEVEL THE SIDE RAIL BY
COVERING WITH A SOFT CLOTH
AND TAPPING WITH A HAMMER.
B
AD
C
E
G
F
NOTE:MUST TIGHTEN SCREW PERIODICALLY.WITH USE SCREWS WILL
BECOME LOOSE CHECK THIGHT OF ALL SREWS EVERY 6-8 WEEKS. MADE IN MALAYSIA
PAGE 2 OF 3
E
STEP 2
Hook the Rails (E) into the LSF and RSF
Headboard Legs (C & D) and the Footboard
(C).
STEP 3
Assemble the Support legs (F) to the Slats (G).

5
E
G
E
B
AD
E
G
F
ASSEMBLY INSTRUCTIONS
B677-315 ANDOVER 5/ 0 Q HEADBOARD, FOOTBOARD & SLATS
B677-335 ANDOVER 5/ 0-6 /6 Q/EK SIDE RAILS
B677-415 ANDOVER 4/6 F HEADBOARD, FOOTBOARD & SLATS
B677-535 ANDOVER 3/ 3-4 /6 T/F SIDE RAILS
STEP 4
COMPLETE
NOTE:MUST TIGHTEN SCREW PERIODICALLY.WITH USE SCREWS WILL
BECOME LOOSE CHECK THIGHT OF ALL SREWS EVERY 6-8 WEEKS. MADE IN MALAYSIA
PAGE 3 OF 3
Assemble the Slats (G) to the Rails (E) by using a screwdriver with hardware 5.
Adjust the Lever on Support Legs (F) to lever the bed.