New Classic Furniture D-1701-32S-GIA User manual

Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts,
which may have come loose inside the carton during shipment. Identify and count all items and compare with
the PARTS LIST and/or HARDWARE LIST shown below.
Caution: Please read the instructions thoroughly before assembly.
1. We recommend that you assemble this product with the assistance of another person; this will make the
assembly easier, and will help eliminate damage to the product or injury to persons during assembly.
2. Please do not over tighten screws or bolts until the assembly is completed.
3. Please put all parts on a non-abrasive floor before assembly,and follow the assembly steps to assemble
your newly purchased product correctly and efficently.
Assembly Instructions
PAGE: 1 OF 4
COUNTER TABLE SET W/2 CHAIRS
PARTS LIST HARDWARE LIST
NO.
A
COMPONENT
CHAIR BACK
SKETCH QTY.
2 PCS
B SEAT FRAME 2 PCS
D2FRONT LEG
(RIGHT) 2 PCS
E1
SIDE
STRETCHER
(LEFT)
2 PCS
D1FRONT LEG
(LEFT) 2 PCS
FFRONT
STRETCHER 2 PCS
E2
SIDE
STRETCHER
(RIGHT)
2 PCS
C CUSHION SEAT 2 PCS
NO.
1
COMPONENT
FLAT WASHER
1/4” DIA.
SPRING
WASHER
1/4” DIA.
SKETCH QTY.
20PCS
220PCS
34PCS
4
BOLT
1/4” x 3 1/4”
624 PCS
ALLEN KEY
M4
71PC
BOLT
1/4” x 1 1/2”
5
8PCS
BOLT
1/4” x 2 1/2”
WOOD SCREW
5/32” x 1 1/2”
8PCS

PAGE: 2 OF 4
Assembly Instructions
STEP 3
Install front stretcher into the holes of the front legs
then attached to the seat frame.
STEP 4
Place the assembled seat frame on the cushion seat
and attach with wood screws.
To assemble the chairs, please follow the following steps and repeat for each chair:
STEP 1
Lay the chair back on soft clean surface and install
the seat frame.
STEP 2
Insert side stretchers with wood screws.
COUNTER TABLE SET W/2 CHAIRS
A
B7
7 3 2
1
5 2
1
E (Right)
E (Left)
A
B
6
6
F
D2(Right)
D1(Left)
E1(Right)
4 7
1 2
A
B
E1(Left)
6
6
66
6

Assembly Instructions
PAGE: 3 OF 4
PARTS LIST HARDWARE LIST
NO.
A
COMPONENT
TABLE TOP
SKETCH QTY.
1 PC
B BOX PANEL 1 PC
D1 BACK LEG
LEFT 1 PC
D2 BACK LEG
RIGHT 1 PC
C2 FRONT LEG
RIGHT 1 PC
FOUTER
STRETCHER 1 PC
ECENTER
STRETCHER 1 PC
C1 FRONT LEG
LEFT 1 PC
NO.
1
COMPONENT
FLAT WASHER
5/16” DIA.
SPRING
WASHER
5/16” DIA.
SKETCH QTY.
8 PCS
28 PCS
LONG BOLT
1/4” x 63 MM
SHORT BOLT
1/4” x 35 MM
38 PCS
46 PCS
WOOD SCREW
4 x 38 MM
64 PCS
ALLEN KEY
4 MM
51 PC
COUNTER TABLE SET W/2 CHAIRS

C2 (Right)
C1 (Left)
A
D1 (Left)
D2 (Right)
5
4
6X
8X
2X
2X
5
3
21
PAGE: 4 OF 4
Assembly Instructions
STEP 3 STEP 4
To assemble the table, please follow the following steps:
STEP 1 STEP 2
COUNTER TABLE SET W/2 CHAIRS
D2 (Right)
C2 (Right)
C1 (Left)
D1 (Left)
F
F
E
66
A
B
B