New Classic Furniture B493-050 User manual

NO: COMPONENT
ADRESSER 1 PC
PARTS LIST
PAGE : 1 OF 4
MADE IN VIETNAM
Q'TY
SKETCH
Assembly Instructions
1. We recommend that you assemble this product with the assistance of another person; this will make the
assembly easier, and will help eliminate damage to the product or injury to persons during assembly.
2. Please do not over tighten screws or bolts until the assembly is completed.
3. Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble your
newly purchased product correctly and efficently.
Caution: Please read the instructions thoroughly before assembly.
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small
parts, which may have come loose inside the carton during shipment. Identify and count all items and
compare with the PARTS LIST and/or HARDWARE LIST shown below.
B
SUPPORT LEG 1 PC
C
D
1 SET
ANTI-TIPPING KIT
E
FRONT LEG 2 PCS
NO: COMPONENT
1
4 PCS
HARDWARE LIST
Q'TY
SKETCH
2
3
4
1 PC
4 PCS
4 PCS
LOCK WASHER 5/16"
BOLT 5/16"*1-3/4"L
FLAT WASHER PLATE 5/16"
ALLEN KEY
Leg box
ITEM: B493-050 LYNDHURST DRESSER
F
RIGHT SIDE FACING
(RSF) BACK LEG
LEFT SIDE FACING
(LSF) BACK LEG 1 PC
1 PC
STEP 1 Locate the leg box in the bottom drawer.
A

PAGE : 2 OF 4
MADE IN VIETNAM
4
3
2
1
B
B
Assembly Instructions
ITEM: B493-050 LYNDHURST DRESSER
D
C
STEP 2 Place the dresser (A) back down on a clean, soft, and flat surface such as a blanket to ensure
the surface is free of any object that could scratch or damage the dresser (A). Then assemble legs
(B, C, & D) to the dresser (A) by using Allen Key (1) with hardware 2, 3, and 4.
A

PAGE : 3 OF 4
MADE IN VIETNAM
Assembly Instructions
ITEM: B493-050 LYNDHURST DRESSER
STEP 3 Assembl e support leg (E) to the dresser (A) as shown.
E
A

PAGE : 4 OF 4
MADE IN VIETNAM
MDF TOP PANEL
SOLID WOOD FRAME
PB BACK PANEL
F
Anti-Tipping Kit must always be used
to prevent the furniture from tipping.
Assembly Instructions
ITEM: B493-050 LYNDHURST DRESSER
STEP 3 Install the anti-tipping kit following the installation instructions in the package.
4