New Classic Furniture GIA 5PC 42" COUNTER TABLE & 4 CHAIRS... User manual

Assembly Instructions
MADE IN VIETNAM PAGE: 1 OF 3
ITEM NO. D1701-542
GIA 5PC 42" COUNTER TABLE & 4 CHAIRS
PARTS LIST HARDWARE LIST
NO.
A
COMPONENT
CHAIR BACK
SKETCH QTY.
4PCS
B SEAT FRAME 4 PCS
D2FRONT LEG
(LEFT) 4PCS
E1
SIDE
STRETCHER
(RIGHT)
4PCS
D1FRONT LEG
(RIGHT) 4PCS
FFRONT
STRETCHER 4 PCS
E2
SIDE
STRETCHER
(LEFT)
4PCS
CCUSHION
SEAT
4PCS
NO.
1
COMPONENT
FLAT WASHER
5/16” DIA.
SPRING
WASHER
5/16” DIA.
SKETCH QTY.
44 PCS
244 PCS
NUT
5/16” DIA.
ALLEN
WRENCH
5/16” DIA.
316 PCS
41 PC
LONG BOLT
1/4” x 3”
616 PCS
WOOD SCREW
#8 x 1 1/2”
748 PCS
SHORT BOLT
1/4” x 1 3/4”
512 PCS
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts,
which may have come loose inside the carton during shipment. Identify and count all items and compare with
the PARTS LIST and/or HARDWARE LIST shown below.
Please read the instructions thoroughly before assembly.
1. We recommend that you assemble this product with the assistance of another person; this will make the
assembly easier, and will help eliminate damage to the product or injury to persons during assembly.
2. Please do not tighten screws or bolts until the assembly is completed.
3. To level the chairs or table, before tightening all the screws, the chairs or table must be place on a flat
surface and then tighten the screws.
4.Please put all parts on a non-abrasive floor before assembly and follow the assembly steps to assemble
your newly purchased product correctly and efficiently.

MADE IN VIETNAM PAGE: 2 OF 3
Assembly Instructions
1
2
5
4
6
4
21
BB
A
A
E1 (Right)
7
7
E2 (Left)
7
7
3
2
14
A
B
D2 (Left)
E1 (Right)
D1 (Right)
E2 (Left)
7
7
F
7
7
7
7
77
STEP 3
Install front stretcher into the holes of the front legs
then attached to the seat frame.
STEP 4
Place the assembled seat frame on the cushion seat
and attach with wood screws.
To assemble the chairs, please follow the following steps and repeat for each chair:
STEP 1
Lay the chair back on soft clean surface and install
the seat frame.
STEP 2
Insert side stretchers with wood screws.
ITEM NO. D1701-542
GIA 5PC 42" COUNTER TABLE & 4 CHAIRS

Assembly Instructions
MADE IN VIETNAM PAGE: 3 OF 3
ITEM NO. D1701-542
GIA 5PC 42" COUNTER TABLE & 4 CHAIRS
PARTS LIST
NO.
A
COMPONENT
TABLE TOP
SKETCH QTY.
1 PC
B TABLE LEG 4 PCS
NO.
1FLAT WASHER
5/16” DIA.
SPRING
WASHER
5/16” DIA.
HARDWARE LIST
COMPONENT SKETCH QTY.
8 PCS
28 PCS
BOLT
5/16” x 60 MM
ALLEN KEY
4 MM
38 PCS
41 PC
To assemble the table, please follow the following step:
A
B
1234
8X