New Classic Furniture BALBOA B909-050 User manual

NO: COMPONENT
ADRESSER 1 PC
PARTS LIST
PAGE : 1 OF 2
MADE IN VIETNAM
Q'TY
SKETCH
Assembly Instructions
ITEM: B909 - 050 BALBOA DRESSER-WALNUT
1. We recommend that you assemble this product with the assistance of another person; this will make the
assembly easier, and will help eliminate damage to the product or injury to persons during assembly.
2. Please do not over tighten screws or bolts until the assembly is completed.
3. Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble your
newly purchased product correctly and efficently.
Caution: Please read the instructions thoroughly before assembly.
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small
parts, which may have come loose inside the carton during shipment. Identify and count all items and
compare with the PARTS LIST and/or HARDWARE LIST shown below.
B4 PCS
SUPPORT LEG 1 PC
C
Leg box
B
A
D1 SET
C
B
Place the dresser (A) back down on a clean soft flat surface such as a blanket and ensure the surface is clean of any objects
that could scratch or damage the dresser .Then a ssemble four leg (B) and support leg (C) to the dresser (A) as shown.
BUN FEET
ANTI-TIPPING KIT

PARTS LIST
PAGE : 2 OF 2
MADE IN VIETNAM
Assembly Instructions
ITEM: B909 - 050 BALBOA DRESSER-WALNUT
1. We recommend that you assemble this product with the assistance of another person; this will make the
assembly easier, and will help eliminate damage to the product or injury to persons during assembly.
2. Please do not over tighten screws or bolts until the assembly is completed.
3. Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble your
newly purchased product correctly and efficently.
Caution: Please read the instructions thoroughly before assembly.
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small
parts, which may have come loose inside the carton during shipment. Identify and count all items and
compare with the PARTS LIST and/or HARDWARE LIST shown below.
MDF TOP PANEL
SOLID WOOD FRAME
PB BACK PANEL
D
Anti-Tipping Kit must always be used
to prevent the furniture from tipping.
NO: COMPONENT
ADRESSER 1 PC
Q'TY
SKETCH
B4 PCS
SUPPORT LEG 1 PC
C
D1 SET
BUN FEET
ANTI-TIPPING KIT
Installing anti-tipping kit: Following the installation instructions that come in the
tip-restraint package. Assemble is complete.