New Classic Furniture TRELLIS D5030-50S User manual

Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts,
which may have come loose inside the carton during shipment. Identify and count all items and compare with
the PARTS LIST and/or HARDWARE LIST shown below.
Please read the instructions thoroughly before assembly.
1. We recommend that you assemble this product with the assistance of another person; this will make the
assembly easier, and will help eliminate damage to the product or injury to persons during assembly.
2. Please do not tighten screws or bolts until the assembly is completed.
3. To level the chairs or table, before tightening all the screws, the chairs or table must be placed on a
flat surface and then tighten the screws.
4. Please put all parts on a non-abrasive floor before assembly and follow the assembly steps to assemble
your newly purchased product correctly and efficiently.
MADE IN VIETNAM PAGE: 1 OF 3
PARTS LIST
NO.
ACHAIR BACK
SKETCH
1 PC
BSEAT
FRONT LEG
C
NO.
1FLAT WASHER
1/4" x 3/4" DIA.
SPRING
WASHER
1/4" DIA.
HARDWARE LIST
SKETCH
10 PCS
2
ALLEN KEY
M4
3
4
1 PC
MEDIUM BOLT
1/4" x 2-3/8"
6
4 PCS
SHORT BOLT
1/4" x 1-3/8"
5
2 PCS
Assembly Instructions
LONG BOLT
1/4" x 3"
10 PCS
4 PCS
1 PC
2 PCS
(TABLE & 4 CHAIRS)
ITEM NO : D5030-50S DINING SET
COLLECTION : TRELLIS
Created date : 7/4/2023
Revised date :
DESCRIPTION QTY DESCRIPTION QTY

2
5
3
1
MADE IN VIETNAM PAGE: 2 OF 3
Assembly Instructions
STEP 1 STEP 2
STEP 3
A
BC
C
Place the chair back (A) on a soft and clean surface.Line up the seat
(B) with the chair back (A) and assemble the two pieces together by
using Allen Key (3) with hardware 1,2, and 4.Then assemble the seat
(B) with the back legs of the chair back (A) using Allen Key (3) with
hardware 1,2, and 6.
*Attention: DO NOT TIGHTEN THE BOLTS
Assemble the front legs (C) with the seat (B) by using Allen
Key (3) with hardware 1,2, and 5.
*Attention: DO NOT TIGHTEN THE BOLTS
To level the chair, stand the chair up on a flat surface and tighten all
the bolts by using Allen Key (3).
Fully Assembled Chair
4
2
1
3
6
2
1
3
STEP 4
Repeat STEP 1 through STEP 3 to assemble the other chair.
B
(TABLE & 4 CHAIRS)
ITEM NO : D5030-50S DINING SET
COLLECTION : TRELLIS
Created date : 7/4/2023
Revised date :
dowel

MADE IN VIETNAM PAGE: 3 OF 3
Assembly Instructions
PARTS LIST HARDWARE LIST
NO.
1BOLT
5/16" x 2-3/8"
SKETCH
8 PCS
2SPRING WASHER
5/16" DIA.
3FLAT WASHER
5/16"x3/4" DIA.
4ALLEN KEY
M4 1 PC
NO.
ATABLE TOP
SKETCH
1 PC
BTABLE LEG 4 PCS
STEP 1
STEP 2
8 PCS
8 PCS
2
1
4
3
A
B
Place the table top upside down on a soft and flat surface.
Assemble table leg (B) by using Allen Key (4) with hardware 1,2, and 3.
*Attention: DO NOT TIGHTEN THE BOLTS
To level the table, stand the table up on a flat surface
and tighten all the bolts by using Allen Key (4).
Fully Assembled Table
(TABLE & 4 CHAIRS)
ITEM NO : D5030-50S DINING SET
COLLECTION : TRELLIS
Created date : 7/4/2023
Revised date :
QTYDESCRIPTION QTYDESCRIPTION