New Holland Haybine 499 User manual

New Holland
Haybine®Mower-Conditioner Specifications
472 488 499
Page 1 of 2
MODEL 472 488 499
CUTTERBAR IDTH, ft. in. (mm) 7’3” (2210) 9’3” (2819) 12’3” (3734)
OVERALL IDTH
Operating, ft. in. (mm) 11’11” (3632) 13’8-1⁄4” (4172) 19’8” (5994)
Transport, ft. in. (mm) 10’4-3⁄4”(3168) 12’2” (3708) 13’9” (4191)
OVERALL LENGTH
Operating, ft. in. (mm) 13’1” (3988) 13’4” (4064) 16’8” (5080)
Transport, ft. in. (mm) 13’1” (3988) 13’4” (4064) 21’6” (6553)
HEIGHT
Operating, ft. in. (mm) 3’5-3⁄4” (1060) 3’6” (1067) 6’2-1⁄2” (1892)
Raised, ft. in. (mm) 4’8” (1422) 5’7” (1702) 6’8-1⁄2” (2045)
EIGHT, lbs. (kg) 2110 (957) 2763 (1253) 4480 (2032)
DRIVE 540 rpm PTO 540 rpm PTO 540 or 1000 rpm PTO
hydrostatic system
TRACTOR REQUIREMENT 30-hp (22.4 kw) or greater 35-hp (26.1 kw) or greater 60-hp (45 kw) or greater with
with standard ASAE hitch with standard ASAE hitch standard ASAE hitch and PTO
and PTO locations and PTO locations locations.
Two remote hydraulic systems
required capable of 1750 psi
(12066 kpa).
HEADER FLOTATION Full, lateral Full, lateral Full, lateral, independent
of conditioning rolls
HEADER LIFT
Guard points maximum lift, in. (mm) 18-1⁄2 (470) 19 (483) 19-1⁄2 (495)
REEL 4-tine bar 4-tine bar Rolareel
Peripheral speed, mph (kph) 6.2 to 8.2 (10.4 to 13.2) 6.5 to 8.6 (10.5 to 13.8) standard—4.8 to 7.9
(7.7 to 12.7) with reduction
kit—4.0 to 6.6 (6.5 to 10.7)
Diameter (maximum), ft. in. (mm) 3’6-1⁄4” (1073) 3’6-1⁄4” (1073) 3’7-1⁄2” (1105)
CUTTERBAR
Knives Bolted, over-serrated Bolted, over-serrated Two opposing assemblies —
sections sections bolted over-serrated sections,
adjustable hold-downs
Guards Twin-forged steel, double- Twin-forged steel, double- Twin-forged steel, double-
hardened or stub guards hardened or stub guards hardened or stub guards
Cutting height, in. (mm) Adjustable from 1-1⁄4 to 4-1⁄4 Adjustable from 1-1⁄4 to 4-1⁄4 Adjustable from 1-1⁄4 to 6-1⁄4
(32 to 108) (32 to 108) (32 to 159)
SICKLE DRIVE wobble joint wobble joint enclosed gearbox
Speed, spm 1632 1632 1700
Stroke, in. (mm) 3 (76) 3 (76) 3 (76)

New Holland
Haybine®Mower-Conditioner Specifications
472 488 499
Page 2 of 2
MODEL 472 488 499
CONDITIONER Chevron-design intermeshing Chevron-design intermeshing Chevron-design intermeshing
rubber rolls rubber rolls rubber rolls
Roll length (crushing area), in. (mm) 85 (2159) 102 (2591) 110 (2794)
Roll diameter, in. (mm) 7-3⁄4 (199) 10-3⁄8 (264) 10-3⁄8 (264)
Drives Individual, #50 roller chain Individual, #50 roller chain Gear/shaft
Speed, rpm 818 637 665
Pressure, lbs./in. (N/mm) 2 to 38 of roll length 2 to 38 of roll length 2 to 38 of roll length
(0.3 to 6.6) (0.3 to 6.6) (0.3 to 6.6)
aterial discharge, in. (mm) Adjustable gate for swath, Adjustable gate for swath, Adjustable gate for swath,
windrow or intermediate widths. windrow or intermediate widths. windrow or intermediate widths.
Infinitely variable between Infinitely variable between 11 settings between
38 (965) and 72 (1829) 38 (965) and 96 (2438) 38 (965) and 100 (2540)
OPERATING SPEED, mph (kph) up to 8 (13) up to 8 (13) up to 8 (13)
aximum safe transport speed,
mph (kph) 25 (40) 25 (40) 25 (40)
TIRES 25 x 7.50-15 flotation 27 x 9.50-15 flotation 11L x 14 4-ply agricultural
implement (HUT)
HYDRAULIC CYLINDERS Optional header lift Optional header lift Standard header lift
Standard tongue shift
OPTIONAL EQUIPMENT:
• Standard or stub guards (472, 488)
• Crop dividers (right-hand standard; left-hand optional on 472, 488)
• Push-bar extension (472, 488)
• Hydraulic lift kit (standard on 499)
• Reel speed reduction kit (499)
• Hydraulic guard angle adjustment kit (499 only)
• Spare-knife holder kit (standard on 499)
• Center skid shoe kit (499 only)
• Safety tow chain
• Knife assembly storage (std on 499, OPT on 472, 488)
Safety begins with a th r ugh understanding f
the equipment. Always make sure y u and
y ur perat rs read the Operat r’s Manual
bef re using the equipment. Pay cl se
attenti n t all safety and perating
decals and never perate machinery
with ut all shields, pr tective devices
and structures in place.
Design, materials and/ r specificati ns are subject t
change with ut n tice and with ut liability theref r.
Specificati ns are applicable t units s ld in Canada, the
United States, its territ ries and p ssessi ns, and may
var y utside these areas.
© 2008 CNH America LLC
New H lland is a registered trademark f CNH America LLC.
Visit ur Web site at www.newholland.com/na. Or, call t ll-free 866-NEW-HLND (866-639-4563).