NewAge Products Lounge Chair User manual

1
Lounge Chair
INSTALLATION GUIDE
ATTENTION:Is your Lounger damaged?
Need help or spare parts? For fastest service,
contact NewAge Products at 1-877-306-8930;
or [e-mail].
Do not return to the retailer.
STOP
IM-ODF.10A-01-Rev1.2
SS-Natural Teak / Charcoal Alum-Natural Teak
For the online installation manual and videos regarding this product, please check out our support hub:
https://newageproducts.com/support-hub/#outdoor-furniture

2
Index
Unpacking 2
Product Inspection 3
Product Specications 3
Tools Needed 4
Hardware Included 4
Assembling the Lounger 5
Bill of Materials - Lounge Chair 8
Cleaning and Care 10
NEWAGE PRODUCTS INC. OUTDOOR FURNITURE MANUFACTURER WARRANTY 12
Unpacking
• Begin by placing the package on a covered at surface.
• Remove all cardboard and foam packaging material.
• Dispose / recycle all packaging materials.
• Verify all the contents in the box and gather the required tools. See“Tools Needed”in the list below.

3
Product Inspection
• Check to see all parts are received as per the
order placed.
• Contact NewAge Products at 1-877-306-8930;
for any missing parts.
• Inspect the products for any damages before
starting the installation.
•Go through the installation instructions carefully
before starting the installation.
Product Specications
506mm
687mm 2060mm
Lounger - SS-Natural Teak / Charcoal Alum-Natural Teak
SS-Natural Teak - SKU# 91038
Charcoal Alum-Natural Teak - SKU# 91043
W 2060mm x D 687mm x H 506mm

4
Tools Needed
Hardware Included
Socket Wrench Allen key
Hex Socket Head Screws
M6x20
X8
Hex Socket Head Screw
M6X40
X10
Wheel Bush
- Small
X2
Wheel Bush
- Large
X2
M6 Lock Nuts
X2
Ø19mm Washer
X2
Ø12mm Washer
X8

5
Assembling the Lounger
Assemble the Legs (1) with side frames (2) by using two M6x20 screws (3) and two 12mm
washers (4) at each corner.
Attach wheels (5) to the leg assembly such that the wheel shaft go through the holes on
bottom of the legs along with a large wheel bush (6). Secure the wheel assembly with a
small wheel bush (7), Ø19mm washer (8) and a M6 lock nut (9) by using a spanner.
1
2
1
2
3
5
6
7
8
9
4

6
Assembling the Lounger
Fix the Lounger seat assembly (10) from the top and make sure the back rest is pointed in the
direction of wheels. Align the holes on seat assembly with the holes on legs and secure the
assembly with ten M6x40 screws (11) by using a Allen key.
3
10
11

7
Assembling the Lounger
Place the lounger cushion on top of the seat assembly. Attach the straps (12) together from
bottom and wrap the cover (13) with head of seat assembly.
4
VELCRO
12
12
13

8
Bill of Materials - Lounge Chair
G
H
I
J
14
3
1
5
4
2
DETAIL G
7
13
DETAIL H
6
10
11
DETAIL I
12
DETAIL J
9
8
15
16
17
19
18

9
Item
No. Part No. Spare Part
SKU# Description BOM
QTY
5 ODF-10.005A-01 NA Outdoor Furniture Lounge Chair Wheel Assy 2
6 H00317A-01 91971 Hex Lock Nut M6 2
7 H00311A-01 91935 JOINT CONNECTOR BOLT [JCBC] M6X20 8
8 H00455A-01 91952 Threaded Rod M6x40 mm 10
9 H00289A-01 91973 JCN M6X10 10
10 H00320A-01 91969 Ring Dia.19mm 2
11 ODF-10.006A-01 NA Outdoor Furniture Lounge Chair Wheel Bush Small 2
12 ODF-10.007A-01 91993 Outdoor Furniture Lounge Chair Wheel Bush Big 2
13 H00336A-01 91967 Ring ID8 X OD12 X 2mm 8
14 ODF-55A-01-XX NA Outdoor Furniture Lounge Chair Cushion 1
15 ODF-10.005.01A-01 91974 Lounge Chair Wheel Rubber 2
16 H00316A-01 91994 Lounger Hidden hinge Set with Hardware 3
17 H00321A-01 91995 Lounger Bush Set with Hardware 2
18 H00315A-01 91962 Rectangle Shoe 25X50X5mm 4
19 H00322A-01 91957 Wood screw 0.5 inch 4
SS-Natural Teak
Alum-Natural Teak
1 ODF-44.001A-01-XX NA Outdoor Furniture Lounge Chair SS-Teak Leg RH-Shoe Assy 1
2 ODF-44.002A-01-XX NA Outdoor Furniture Lounge Chair SS-Teak Leg LH-Shoe Assy 1
3 ODF-44.003A-01-XX NA Outdoor Furniture Lounge Chair SS-Teak Seat-Backrest Assy 1
4 ODF-44.004A-01-XX NA Outdoor Furniture Lounge Chair SS-Teak Leg Stiener Assy 2
1 ODF-10.001A-01-XX NA Outdoor Furniture Lounge Chair Alum-Teak Leg RH-Shoe Assy 1
2 ODF-10.002A-01-XX NA Outdoor Furniture Lounge Chair Alum-Teak Leg LH-Shoe Assy 1
3 ODF-10.003A-01-XX NA Outdoor Furniture Lounge Chair Alum-Teak Seat-Backrest Assy 1
4 ODF-10.004A-01-XX NA Outdoor Furniture Lounge Chair Alum-Teak Stiener Assy 2
Bill of Materials - Lounge Chair

10
Cleaning and Care
Teak Frames
• Remove debris with a soft nylon bristled brush
• Clean the surface using a sponge or damp cloth with water and mild soap.
• Soak up any excess water with a microber or lint-free cloth
• Allow the wood to dry naturally
• To help prevent staining on teak components, NewAge recommends applying Golden Care’s Teak Shield
on our products. Follow the application instructions provided with Teak Shield.
Oiling teak parts regularly can help preserve its original golden brown appearance.
Follow the below steps for oiling:
1. Place a cloth or newspaper beneath the teak parts to catch spills. Put on gloves to avoid getting oil on
your hand, which may cause skin irritation.
2. Clean the wooden parts with water and mild soap.
3. Dry the wooden parts after cleaning and leave them for 24–36 hours to remove all moisture before
applying the oil.
4. Apply teak oil by using a paint brush or a piece of cloth.
5. Wait fteen minutes, then wipe down with a cloth.
6. Reapply every 6 months.
Powder Coated Aluminum Frames
• Clean with water and a mild liquid detergent to remove any dirt or splashes.
• A microbre cloth or sponge should be used to wipe over the surfaces of the furniture.
• Removing surface water with a drying cloth will help avoid water spots.
• Avoid using any abrasive cleaning agents or materials, as these could mark the surface of the powder
coat.
• This material is scratchable, do not use steel wool or Scotchbrite on powder coated surfaces.

11
Cushions
• Vacuum regularly, and avoid leaving in direct sunlight for long periods of time.
• It is recommended to keep the cushions dry.
• Always use a mild cleanser.
• Before cleaning the cushions, brush away the loose dirt rst. This will help to avoid rubbing in any
existing dirt as the fabric is cleaned. If any spots or stains are noted, be sure to remove them right away
using mild cleanser.
• Do not use solvent type cleaners, do not use machine wash or dry clean.
• Never apply heat to cushion fabrics.
• For cushions exposed to direct sunlight or the everyday elements, we recommend storage of cushions
when not in use.
Stainless Steel Frames
• Wash regularly with clean fresh water, mild detergent and a micro ber cloth.
• After washing rinse with clean water and wipe the surface dry with your cloth remembering to go with
the grain on brushed stainless steel.
• Do not use abrasive cleaners or a scouring pad of any type as they will cause excessive wear and dull the
nish.
• We recommend using a multi-surface cleaner or stainless steel cleaner to remove spots.
If you have oxidation there are a few steps to take to bring your stainless steel parts back
to “as new” condition:
• Apply clean water with a cleaning sponge and rub gently in the direction of the grain.
• If the mark won’t shift, it may be necessary to use a stainless steel cleaner, in which case apply the
cleaner and rub gently.
• After cleaning it is important to rinse the stainless steel with clean fresh water and bu with a soft cloth
• Remember to always rub with the grain, NEVER across as you will ruin the nish, and the stainless can
lose its shine. If you must use a scourer, use a plastic scrub pad with no metal content
Cleaning and Care

12
Scan this QR code with the camera
on your mobile device to visit the
NewAge Products Support Hub
www.newageproducts.com/support-hub/
Register your NewAge Products purchase online for quicker
customer assistance and access to exclusive benefits
Visit www.newageproducts.com/register/
Warranty Claim
For warranty service please contact NewAge Products at
1-877-306-8930; or [email protected]
Please review all warranty details below, prior to
contacting NewAge Products for a claim.
Scan the QR code on the right to access our support page or
visit www.newageproducts.com/contact-us/
PROOF OF PURCHASE IS REQUIRED
TO OBTAIN WARRANTY SERVICE.
Please have the following information available
when you call our customer service team:
• Name, address and telephone number
• Product Name / SKU Number
• A clear, detailed description of the problem
• Proof of purchase including order number
NEWAGE PRODUCTS INC. OUTDOOR FURNITURE
MANUFACTURER WARRANTY
WHAT IS COVERED
When this product is installed, operated and maintained according to the instructions attached to or furnished with the product, NewAge Products
Inc. will replace the defective product or parts if the part fails as a result of defective materials or workmanship for the warranty duration from the
purchase date of the product.
1. Service calls to correct the installation of any NewAge products or to instruct you how to use or install them.
2. Damage resulting from products caused by accident, misuse, abuse, fire, flood, improper installation, acts of God, neglect, modification or
mishandling.
3. Repairs or replacement when your product is used in other than normal, residential use, such as a commercial environment, or handled in
anyway inconsistent with the installation instructions included with the product.
4. Sudden variations in temperature or exposure to unusual conditions.
5. Flattening or compression of cushions, swivel mechanisms.
6. Changes in wood color due to natural ageing and minor cracks on wood with time.
7. Variations in surface finishes due to UV exposure or natural ageing and surfaces damaged due to improper use of chemicals, and detergents.
8. Normal fading of fabrics, upholstery or woven materials.
9. Replacement parts for NewAge products outside Canada and the United States.
10. Loss due to theft.
11. Damage resulting from use of the product contrary and not in accordance to the instruction manual.
12. Any labor costs during the warranty period.
WHAT IS NOT COVERED

13
DISCLAIMER OF IMPLIED WARRANTIES
IMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO ONE YEAR, OR
THE SHORTEST PERIOD ALLOWED BY LAW. THIS WARRANTY IS LIMITED TO THE ORIGINAL BUYER. Some states and provinces do not allow limitations
on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty gives you specific legal rights, and
you also may have other rights that vary from state to state or province to province.
LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR REPLACEMENT AT OUR DISCRETION AS
PROVIDED HEREIN. NEWAGE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the
exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific
legal rights, and you also may have other rights that vary from state to state or province to province.
THREE YEARS LIMITED WARRANTY
NewAge warranty covers Aluminum and Stainless Steel frames for 3 YEARS. If your Newage frame fails structurally during the normal usage within
three years, NewAge will repair or replace the Outdoor furniture frame at manufacturer’s discretion (with same or similar product if discontinued).
From time to time there may be minor variations in color and texture of finishes. THIS WARRANTY SPECIFICALLY DOES NOT COVER SUCH
MINOR VARIATIONS IN COLOR AND TEXTURE OF FINISHES.
STAINLESS STEEL AND POWDER COATED ALUMINUM FRAMES
NewAge warranty covers all cushions and fabrics for 1 YEAR. If your cushion or fabric becomes unserviceable due to color or strength loss from
normal usage and exposure conditions, including sunlight, milddew and atmospheric chemicals within 1 year of the date of purchase, NewAge
will repair or replace the fabric in the original color and pattern if available, or in a similar color and pattern if the original has been discontinued.
Any failures in stitching, cushion foam, Umbrella frame/pole or other areas of workmanship will be warrantied for 1 YEAR. THIS WARRANTY
DOES NOT COVER NORMAL CARE AND CLEANING, DAMAGE FROM MISUSE OR ABUSE, IMPROPER INSTALLATION, OR COSTS ASSOCIATED
WITH REPLACEMENT OF THE FABRIC, INCLUDING LABOR AND INSTALLATION. THE FABRIC WILL NOT BE WARRANTIED IF DETERIORATION,
DISCOLORATION, FADING, ETC. IS DUE TO CHEMICALS, CLEANING PRODUCTS, SUN LOTIONS ET AL, USE IN COMMERCIAL SETTINGS,
EXTREME HEAT OR SUNLIGHT.
CUSHIONS AND FABRIC
NewAge warranty covers teak furniture frames for 3 YEARS. If your NewAge frame fails structurally during the normal usage within 3 years,
NewAge will repair or replace the Outdoor furniture frame at manufacturer’s discretion (with same or similar product if discontinued). This
warranty is valid only if the teak is maintained properly according to the instructions provided in the install guide. Natural variations occurring in
wood shall not be considered. From time to time there may be variations in color and texture of finishes. WARRANTY SPECIFICALLY DOES NOT
COVER SUCH MINOR VARIATIONS IN COLOR AND TEXTURE OF FINISHES. COMPONENTS SUCH AS CHAIR FEET ARE SUBJECT TO WEAR
AND TEAR AND ARE NOT CONSIDERED PART OF THE FRAME.
TEAK FRAMES
NEWAGE PRODUCTS INC. OUTDOOR FURNITURE
MANUFACTURER WARRANTY
ONE YEAR LIMITED WARRANTY
NewAge warranty covers Flat rope and Wicker woven on the frames for 1 YEAR. If the hand-woven resin weave breaks or structurally deteriorates,
or if the weave excessively fades or becomes discolored within One year from the date of purchase, we will at our option, replace, repair or
refinish the product in the original color and style, if available, or in a similar color and style if the original has been discontinued. THE WEAVE WILL
NOT BE WARRANTIED IF DETERIORATION, DISCOLORATION, FADING, ETC. IS DUE TO CHEMICALS, CLEANING PRODUCTS OTHER THAN
SPECIFIED, SUN LOTIONS ET AL, USE IN COMMERCIAL SETTINGS, EXTREME HEAT OR SUNLIGHT.
WOVEN FRAMES (FLAT ROPE AND WICKER)

1
Chaise longue
GUIDE D’INSTALLATION
IM-ODF.10A-01-Rev1.2
Acier inoxydable - Teck naturel / Aluminium gris - Teck naturel
ATTENTION:Votre Chaise longue est-elle endommagée?
Vous avez besoin d’assistance ou de pièces de rechange?
Pour un service plus rapide, contactez NewAge Products au
1 877-306-8930 ou écrivez à [email protected].
Ne retournez pas ce produit au détaillant
STOP
Pour le manuel d’installation en ligne et les vidéos concernant ce produit, veuillez consulter notre centre d’assistance:
https://newageproducts.com/support-hub/#outdoor-furniture

2
Index
Déballage
• Commencer par placer l’emballage sur une surface plane doté d’un revêtement;
• Retirer tout le carton, les matériaux d’emballage en mousse et les sacs en nylon;
• Mettre au rebut/recycler tous les matériaux d’emballage;
Déballage 2
Inspection du produit 3
Spécications du produit 3
Outils nécessaires 4
Matériel fourni 4
Assemblage de la chaise longue 5
Nomenclature 8
Nettoyage et entretien 10
NEWAGE PRODUCTS INC. GARANTIE DU FABRICANT DE MOBILIER D’EXTÉRIEUR 12

3
• Assurez-vous d’avoir reçu toutes les pièces
conformément à la commande que vous avez
passée.
• S’il manque des pièces, contactez NewAge
Products au 1 877-306-8930.
• Avant de commencer l’installation, inspectez les
produits pour y déceler tout dommage.
• Lisez attentivement les instructions
d’installation avant de commencer l’installation.
Spécications du produit
506mm
687mm 2060mm
Acier inoxydable - Teck naturel - SKU# 91038
Aluminium gris - Teck naturel - SKU# 91043
W 2060mm x D 687mm x H 506mm
Inspection du produit

4
Outils nécessaires
Matériel fourni
Clé à douille clé Allen
Vis à tête creuse
hexagonale
M6x20
X8
Vis à tête creuse
hexagonale
M6X40
X10
Roue De Bush
- Petit
X2
Roue De Bush
- Grand
X2
Contre-écrou M6
X2
Rondelle Ø19mm
X2
Rondelle Ø12mm
X8

5
Assemblage de la chaise longue
Assemblez les Jambes (1) avec les cadres latéraux (2) en utilisant deux vis M6x20 (3) et deux
rondelles de 12 mm (4) à chaque coin.
Fixez les roues (5) à l’ensemble de pied de telle sorte que l’arbre de roue passe par les trous au
bas des pieds avec une grande douille de roue (6). Fixez l’ensemble de roue avec une petite
douille de roue (7), une rondelle Ø19 mm (8) et un contre-écrou M6 (9) à l’aide d’une clé.
1
2
1
2
3
5
6
7
8
9
4

6
Assemblage de la chaise longue
Fixez l’assemblage du siège du transat (10) par le haut et assurez-vous que le dossier est
pointé dans le sens des roues. Alignez les trous de l’assemblage du siège avec les trous des
pieds et xez l’assemblage avec dix vis M6x40 (11) à l’aide d’une clé Allen.
3
10
11

7
Assemblage de la chaise longue
Placez le coussin de chaise longue sur le dessus de l’assemblage du siège. Attachez les sangles
(12) ensemble par le bas et enveloppez le couvercle (13) avec la tête d’assemblage.
4
VELCRO
12
12
13