Nex-tech QC3886 User manual

Instruction Manual
QC3886
1080p Smart Wireless
Doorbell + Chime

1
PRODUCT DIAGRAM:
BOX CONTENTS:
1 x Smart Doorbell Camera
1 x Mounting Bracket
1 x Mounting Hardware
1 x Chime
1 x USB Charging Cable
1 x User Manual
1PIR Motion Sensor
2Infrared LED
3Microphone
4Push Button
5170° HD Camera
6Indicator
7Speaker
8Volume Control
9Previous Ringtone
10 Next Ringtone
11 Power Plug
12 LED Indicator
13 Chime Speaker
1
8
10
9
2
3
4
5
6
12
13
11
7

2
SETUP:
Install App
Download & install the “Smart Life” app from the Google Play or iOS App
Store. This can be found by searching for “Smart Life” in the correct store for
your phone, or by scanning the below QR code.
Once you have downloaded & installed the App, you will need to register an
account before continuing.

3
SETUP:
Add Device
Press the “+” symbol in the top right of the screen, followed by the “Add
Device” button to begin setting up your new wireless doorbell.
Select “Add Manually”, choose “Security & Video Surveillance” and finally
“Smart Doorbell” as the device.

4
SETUP:
Reset Device
Before adding your new wireless doorbell, ensure the unit is reset & in pairing
mode. To do this, with batteries inserted press and hold the “Reset” button on
the rear until it makes a chime sound. Once confirmed, check the button and
press next.

5
SETUP:
Setup WiFi
If your mobile phone is not connected, the App will ask you to connect. Press
the “Connect to WiFi” button & connect to the network your wireless door
phone will be connected to.
Once connected, enter the WiFi password into the app & press the “Next”
button to begin the pairing process.

6
SETUP:
Scan QR Code
With the doorbell still powered on, face the QR shown on the App in your
phone towards the camera until a chime is heard. Press the “I Heard a Prompt”
button to begin the pairing process.
The device will begin linking to the app and may take a few minutes. Once
complete, the device is setup and ready to use.

7
USING THE APP:
When the doorbell is rung via the button on the unit, a notification will be
sent to the App. Within the app, press the “Monitor Switch” button to enable
talk and then press & hold the “Speak” button to talk through the door phone.
Recorded photo & video can also be played back, providing an SD card has
been installed.
Monitor Switch
Preview Mode
Full Screen Mode
Remaining Battery
Device Settings
Signal Strength

8
PRODUCT SPECIFICATIONS:
Video Resolution: 1080p (1920 x 1080)
Lens Angle: 170’
Video Compression: H.264
Recording Format: Video: MP4
Images: PNG
Storage Capacity: Up to 128GB* MicroSD Card
Standby Time: Up to 6 months
Battery: 2 x 18650 Li-ion Batteries (Not included)
Wireless Frequency: 2.4Ghz WiFi
Dimensions: 131(W) x 68(H) x 29(D)mm
* Max storage capacity in FAT32 Format.

9
NOTES:

10
NOTES:

Distributed by:
Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere
NSW 2116 Australia
www.electusdistribution.com.au
Made in China