Nex-tech XC4953 User manual

Instruction Manual
XC4953
USB 2.0 to 3.5mm
Audio Converter

2
USAGE INSTRUCTIONS:
PRODUCT DIAGRAM:
For Windows
Connect the product to your
computer. Your computer will
detect the new audio adaptor
automatically and complete the
installation. After successful
installation, you should be able
to find the audio adaptor under
Control Panel.
Open [Control Panel > Sound]. User
can click on [Recording] column to
enter recording mode.
Tip: In general, USB sound card has a system
to default the audio input/output. If you have
problems with the system, you can adjust the
audio input/output from the Control Panel:
1Microphone
2Headphone
1
2

3
For Macintosh
Connect the product to your Mac.
Open [About > System Report >
Hardware > Sound]
Enter [Preference > Audio] and
select relevant adjustment:

Distributed by:
Electus Distribution Pty Ltd
46 Eastern Creek Dr,
Eastern Creek NSW 2766 Australia
Ph 1300 738 555
Int’l [phone]
Fax [phone]
www.electusdistribution.com.au