Night optics Digital sentry User manual

Operator Manual

DIGITAL SENTRY

2x Color Digital Night Vision Monocular

OVERVIEW

[1] Battery Compartment

[2] Objective Lens / Focus

[3] Device Housing

[4] Accessory Mount

[5] Diopter / Eyepiece

[6] Rubber Eye Guard

[7] Power / IR Switch

[8] IR Iluminator

SPECIFICATIONS

Lens System 2x / 28mm

Field of View 6.4º

Range 220 yds

Display 330 x 224 / LED

IR Illuminator Yes / 850nM

Dimensions (in) 6.75 x 2.25 x 2.125

Battery / Life AA / 2-3hrs

Weight Accessory Mount

Battery Installation (fig. 1.1)

Squeeze the 2 wings on the battery compartment

cover together to release the cover. Install batteries

correctly according to the polarity diagrams inside

the battery compartment and replace the cover.

Remove and store batteries when the device is not

in use.

Power and IR Control (fig. 1.7)

Powering up and adjusting IR intensity can be

controlled by turning the switch located at the back

of the device housing (fig. 1.7). Rotate the switch to

the right. The switch will produce a tactile click

when powering on and off.

To activate the IR and adjust IR brightness simply

continue to rotate the power switch to the right until

it cannot be rotated any further.

Turn off the IR Illumination by rotating the switch to

the left - back towards the off position until it cannot

be rotated any further.

Power off by rotating the switch to the left until there

is a tactile click.

Diopter Focus (fig. 1.5)

For the best possible user experience diopter

adjustment must be made.

Holding the monocular up to your eye with the

power on, rotate the eyepiece (fig. 1.5) until the

edges of the LED display become sharp.

Objective Focus (fig. 1.2)

Holding the monocular up to your eye with the

power on, rotate the front objective lens (fig. 1.2)

until the image in the field of view becomes sharp.

Ensure that the subject is at least 3 feet away.

Focus will require adjustment depending on the

distance of the subject.

For the best possible user experience keep the

objective lens clean and free of lint, oil or dirt. The

lens can be cleaned with a clean dry lint-free cloth.

For dried or stuck-on dirt use a lightly moistened

lint-free cloth can be used with clean water or a

glass / lens cleaning solution.

Accessories (fig. 1.4)

The Digital Sentry comes with a head / helmet

mount adapter and a weapon mount adapter.

To mount the accessory adapters, line up the

screw hole with the screw and tighten. Be careful

not to cross-thread the screw. - If the screw

becomes tight but the mount is still loose, it is not

properly mounted. Loosen and realign.

When properly installed there should be no free

play between the mount accessory and the

monocular housing.

Maintenance and Storage

Store in a cool dry place with batteries removed

Do not submerge or allow to get excessively wet.

Clean with dry lint-free or lightly moistened cloth.

Troubleshooting

Any problem that cannot be corrected by following

the instructions above may require that you

contact a Night Optics representative for support.

Monday - Friday / 8am - 3:30pm PST. Ph: (714) 899-4475

OPERATION

Operator Manual

DIGITAL SENTRY

2x Color Digital Night Vision Monocular

Package Contents:

Digital Monocular

Soft Pouch

Rubber Eye Guard

Head / Helmet Mount Adapter

Weapon Mount Adapter

(2) AA Batteries

The Digital Sentry Monocular is covered by a limited 1 year warranty from time of sale. The warranty is valid only for the original purchaser. The manufacturer warrants its products to be free from defects in material

and workmanship during the warranty period. If the product proves to be defective during this period, the manufacturer will repair the original product or replace it with a like product at the sole discretion of the

manufacturer.

This limited warranty does not cover:

No other warranties, expressed or implied, are valid without an agreement in writing provided by the manufacturer. All shipping involved in warranty work / replacement is the sole responsibility of the purchaser.

LIMITATIONS OF LIABILITY

Night Optics USA, Inc. will not be liable for any claims, actions, suits, proceedings, costs, expenses, damages or liabilities arising out of the use of this product. Operation and use of this product are the sole

responsibility of the Customer. Night Optics USA, Inc.’s sole responsibility is limited to providing the products and service outlined herein in accordance with the terms and conditions of this Agreement. The provision

of products sold and services performed by Night Optics USA, Inc. to the Customer shall not be interpreted, construed, or regarded, either expressly or implied, as being for the benefit or creating any obligation

toward any third party of legal entity outside Night Optics USA, Inc. and Customer; Night Optics USA, Inc.’s obligations under this Agreement extend solely to the Customer.

Night Optics USA, Inc.’s liability hereunder for damages, regardless of the form or action, shall not exceed the fees or other charges paid to Night Optics USA, Inc. by the Customer or the Customer’s dealer. Night

Optics USA, Inc. shall not, in any event, be liable for special, indirect, incidental, or consequential damages, including, but not limited to, lost income, lost revenue, or lost profit, whether such damages were

foreseeable or not at the time of purchase, and whether or not such damages arise out of breach of warranty, a breach of agreement, negligence, strict liability, or any other theory of liability.

WARRANTY

1. Any product on which the serial number has been defaced, modified, or removed.

2. Any product that has experienced deterioration or a malfunction from: accidents, misuse, neglect, fire, water, lighting or other acts of nature, unauthorized product

modification or failure to follow instructions supplied with the product, repair or attempted repair by anyone not authorized to do so, use of supplies or parts not meeting