
For support with the installation of this equipment contact Nightlife Technical Support:
AUS: 1800 773 468 | NZL: 0800 111 960 | ASIA-PACIFIC: +800 7777 7733 | Other Countries: +61 7 3858 2581 nightlife.com.au
For more support with installation of this equipment contact Nightlife Technical Support:
AUS: 1800 773 468 | NZL: 0800 111 960 | ASIA-PACIFIC: +800 7777 7733 | INT: +61 7 3858 2581 nightlife.com.au
22" Kiosk
3m Ethernet cable
Power supply consisting of '1x IEC
C5 cloverleaf power cable' and '1x
12v adaptor'
M12x35 Countersunk screw
400mm x 400mm baseplate
M4x16 Philips screws + washers
8mm Allen key
1100mm x 75mm podium tube
Feed the 12v adaptor cable (C) and the 3m
ethernet cable (B) through the halfmoon slot at
the base of the podium tube (H) and out through
the top (leave ~300mm of slack). The base plate
(E) can now be xed to the podium stem by
using the M12x35 counter sunk screw (D).
A
B
E
F
H
C
H
B
C
E
The kiosk must be oriented
so the Chrome logo is in
the top-right corner.
Connect the 12v adaptor to the IEC C5
cloverleaf power cable (C) and place the 12v
adaptor on the podium base and secure with
the velcro strip. Using the 4 M4 Philips head
screws and washers (F), x the kiosk (A) to the
podium tube (H). Connect the 3m ethernet
cable (B) and the 12V power plug to the kiosk.
F
A
J
Our crowdDJ® Kiosks are a great addition to any venue. For any issues or questions about positioning or nding the
best location for your Kiosk, your Customer Service Representative will be available to help.